User's Manual Part 2

226 APCD-LM043-8.0 (DRAFT C)
Appendix E: Access Interface
SA1110.BAK 0 1d6523d1
BASIC.CFG 1992 1fd3b0ba
PORT.CFG 6240 c7148a64
SA1110.EXE 477617 9af8566b
BOOTROM.BIN 447864 b4fb30fe
SNTP.CFG 156 c771acf9
c. Look for problems, such as an executable file with a size of 0, which indicates
a corrupted file.
3. If the connection is unsuccessful, restart the EUM30003 in INOP mode, as described
in
To Recover the EUM3003 IP Address on page 224.
4. If you still cannot connect to the EUM3003, contact WaveRider Technical Support.
PC Configuration
The following two procedures explain how to configure network settings on a PC running the
Windows XP operating system, and how to add a static route to a PC.
To Configure PC Network Settings (Windows XP Operating System)
1. Click the Windows Start button and open Control Panel > Network Connections >
Local Area Connection.
2. Click the
Properties button.
3. Select
Internet Protocol (TCP/IP) and click the Properties button.
4. Select
Use the following IP address.
5. Fill in the IP address, Subnet mask, and Default gateway fields, so the PC is on the
same subnet as the EUM, and click
OK.
Figure 63 Windows XP TCP/IP Properties