User's Manual Part 2

Appendix D: INOP Commands
APCD-LM043-8.0 (DRAFT C) 219
radio frequency <frequency> Changes the EUM radio frequency.
•
<frequency> is the new radio
frequency, in tenths of a MHz. (For
example, 905.0 MHz is entered as
9050.) The radio frequency must be
within the range of 9050 to 9250. The
frequency may use only 0.2 MHz
increments and may use even values
only.
√
radio rf high|low|<value> Displays or sets the power of the EUM
radio, where programming the value to:
•
high will set the transmit power
output to +26 dBm,
•
low will set the transmit power to
+15 dBm, and
•
<value>, where <value>, an
integer between 15 and 26
inclusive, will set the transmit power
to
+<value> dBm.
NOTE: The EUM RF level should normally
be set to
high.
reset|reboot Reboots the EUM.
save|commit Saves configuration changes.
Command Syntax (EUM) Command Description