User's Manual Part 2

Appendix C: Command-Line Syntax
APCD-LM043-8.0 (DRAFT C) 209
snmp community delete
<community>
Deletes an SNMP community.
•
<community> is the name of the
SNMP community being deleted.
snmp contact Displays the SNMP system contact.
snmp contact <contact> Changes the SNMP system contact.
•
<contact> is name of the EUM SNMP
system contact (subscriber, for
example), from 1-80 characters in
length.
√
snmp interface Displays the interface MIBs.
snmp location Displays the SNMP system location.
snmp location <location> Changes the SNMP system location.
•
<location> is the location of the
EUM, from 1-80 characters in length.
√
snmp trap Displays the SNMP Trap Server Table.
snmp trap add <aaa.bbb.ccc.ddd>
<community>
Adds a trap server community.
•
<aaa.bbb.ccc.ddd> is the Ethernet
IP address of the trap server.
•
<community> is the community name
for the trap server, from 1-63
characters in length.
snmp trap delete
<aaa.bbb.ccc.ddd> <community>
Deletes a trap server community.
•
<aaa.bbb.ccc.ddd> is the Ethernet
IP address of the trap server.
•
<community> is the community name
for the trap server being deleted, from
1-63 characters in length.
stats Displays the statistics for all drivers and
network protocols.
stats clear Clears the statistics for all drivers.
stats ethernet Displays Ethernet statistics.
stats log <interval>|OFF|NOW Displays or sets statistics logging interval in
minutes.
• <interval> is the time interval in minutes
of statistics logging, from 1 to 65535
minutes; setting the interval also turns
logging on.
• OFF turns statistics logging off.
• NOW prints the current statistics to the
log without affecting the period or
turning logging on or off.
Command Syntax (EUM) Command Description