User's Manual Part 2

204 APCD-LM043-8.0 (DRAFT C)
Appendix C: Command-Line Syntax
EUM Command-line Syntax
Table 41 EUM Command-Line Syntax
NOTE:
In Table 41, commands that are noted with a √ in the right-hand
column will not take effect until you have rebooted the EUM.
Command Syntax (EUM) Command Description
arp
Displays the ARP Table.
arp add <aaa.bbb.ccc.ddd>
<XX.XX.XX.XX.XX.XX> [flags]
Adds an entry to the ARP Table.
•
<aaa.bbb.ccc.ddd> is the IP
address of the new entry.
•
<XX:XX:XX:XX:XX:XX> is the MAC
address, in hexadecimal format.
•
[flags] is always set to 4, meaning
the entry is
permanent and does not
time out, as long as the CCU or EUM is
ON.
arp delete <aaa.bbb.ccc.ddd> Deletes an entry from the ARP table.
•
<aaa.bbb.ccc.ddd> is the IP
address of the entry.
arp flush Removes all entries from the ARP Table.
bcf Displays the basic configuration file (BCF).
bridge | customer Displays the bridge table.
bridge | customer flush Removes all entries from the bridge table.
bridge | customer maximum <max> Sets the maximum number of customers.
• <max> is the maximum, which must be
from 1 to 50.
exit|quit Exits the current console session and
returns to the password prompt.
file copy|cp <source>
<destination>
Copies a file.
•
<source> is the name of the source
file.
•
<destination> is the name of the
destination file.
file delete <filename> Deletes a file.
•
<filename> is the name of the file you
want to delete.
file dir|ls Lists the file directory.