User's Manual Part 2

200 APCD-LM043-8.0 (DRAFT C)
Appendix C: Command-Line Syntax
route delete <aaa.bbb.ccc.ddd>
<eee.fff.ggg.hhh> <netmask>
Deletes a route from the routing table.
•
<aaa.bbb.ccc.ddd> is the Ethernet
IP address of the network being
removed from the routing table.
•
<eee.fff.ggg.hhh> is the Ethernet
IP address of the gateway through
which the destination device can be
reached.
•
<netmask> is the subnet mask for the
destination network
(0-32).
route stats Displays the routing statistics.
save | commit Saves configuration changes.
snmp Displays the CCU SNMP information.
snmp community Displays the SNMP communities.
snmp community add <community>
<read|write>
Adds an SNMP community.
•
<community> is the name of the
SNMP community being added, from 1-
31 characters in length.
• Enter
<read> or <write> to indicate
the type of the community being added.
snmp community delete
<community>
Deletes an SNMP community.
•
<community> is the name of the
SNMP community being deleted.
snmp contact Displays the SNMP system contact.
snmp contact <contact> Changes the SNMP system contact.
•
<contact> is the name of the contact
(WISP, for example), from 1-80
characters in length.
√
snmp interface Displays the SNMP interface MIBs.
snmp location Displays the SNMP system location.
√
snmp location <location> Changes the SNMP system location.
•
<location> is the location of the
CCU, from 1-80 characters in length.
snmp trap Displays the SNMP Trap Server Table.
snmp trap add <aaa.bbb.ccc.ddd>
<community>
Adds a trap server community.
•
<aaa.bbb.ccc.ddd> is the Ethernet
IP address of the trap server.
•
<community> is the community name
for the trap server, from 1-63
characters in length.
Command Syntax (CCU) Command Description