User's Manual Part 2

Appendix C: Command-Line Syntax
APCD-LM043-8.0 (DRAFT C) 193
auth gos <gos> Displays the GOS definitions.
•
<gos> is the default grade of service.
Available GOSs are gold, silver, bronze, be
(best effort), and broadcast.
auth radius Displays the RADIUS client configuration.
auth radius accounting enable Enable RADIUS accounting.
NOTE: RADIUS authorization must be
enabled before you can enable RADIUS
accounting.
auth radius accounting disable Disable RADIUS accounting.
auth radius disable Disables RADIUS authorization and
accounting.
auth radius enable Enables RADIUS authorization.
auth radius period <period> Sets the period between RADIUS requests
for each EUM.
• <period> is the number of minutes
between RADIUS requests. The period
must be between 5 and 20000 minutes.
auth radius primary
<aaa.bbb.ccc.ddd>|none
Sets the primary RADIUS server IP address
and password. The CCU prompts for
password entry.
• <aaa.bbb.ccc.ddd> is the primary
RADIUS server IP address.
auth radius secondary
<eee.fff.ggg.hhh>|none
Sets the secondary RADIUS server IP
address and password. The CCU prompts
for password entry.
• <eee.fff.ggg.hhh> is the secondary
RADIUS server IP address.
bcf Displays the basic configuration file (BCF).
bridge | customer Displays the bridge table.
bridge | customer flush Removes all entries from the bridge table.
bridge | customer maximum <max> Sets the maximum number of customers.
• <max> is the maximum, which must be
from 1 to 50.
dhcp Displays status of CCU DHCP Relay, either
enabled or disable.
dhcp disable Disables DHCP relay.
dhcp enable Enables DHCP relay.
Command Syntax (CCU) Command Description