User's Manual Part 1

10 APCD-LM043-8.0 (DRAFT C)
2: Quick Startup
You will see the EUM command prompt:
60:ff:fe>
NOTE: The default prompt on an EUM includes the last five digits of the
EUM serial number.
3. Enter the commands shown in bold below to confirm the IP and radio configurations:
60:ff:fe> ip
IP Address: 192.168.10.250 / 24
IP Subnet : 192.168.10.0 ( 255.255.255.0 )
Gateway IP Address: 192.168.10.1
60:ff:fe> radio
RF Power: HIGH
Radio Frequency: 9050
60:ff:fe>
EUM configuration is now complete.
4. Type exit and press Enter to log out of the EUM.
2.6 Subscriber PC Configuration
While the CCU supports DHCP Relay, this Quick Startup chapter describes a static
configuration.
1. On the subscriber PC, open the TCP/IP Properties window. For more information,
refer to To Configure PC Network Settings (Windows XP Operating System) on page
226.
2. Configure the following TCP/IP properties:
• IP Address: 192.168.10.251
• Subnet Mask: 255.255.255.0
• Default Gateway: 192.168.10.1