User's Manual Part 1

154 APCD-LM043-8.0 (DRAFT C)
9: Installing the EUM
human body. WaveRider recommends installing the antenna in a
location where personnel are not able to bump into it, obstruct the
signal from the base station, or trip over antenna cables.
3. Position the antenna in the bracket according to one of the configurations illustrated in
Figure 58. Click and lock the antenna in place. For maximum signal reception, ensure
the concave surface of the antenna points toward the WISP antenna and the trough of
the inset wave points towards the floor.
Figure 58 Mounting the Antenna in the Bracket
NOTE:
The location, position, and orientation of the antenna affects the
robustness of the Internet connection. Pointing the antenna at
buildings or other obstacles often impedes communications, but
some surfaces may provide desirable signal bounce. For optimal
reception, try various positions before fix-mounting your antenna.
4. Once the antenna is permanently mounted, re-align it for best signal.
9.4.8 Connecting the End-user’s PC
CAUTION: Any DC voltage applied to the Ethernet port may
damage the EUM, the Ethernet cable, and/or the network gear.
The EUM is not
a Power-over-Ethernet device.
- Concave surface pointing
towards WISP antenna
- Trough of inset wave pointing
towards floor.
Inset wave