User's Manual Part 1

xviii APCD-LM043-8.0 (DRAFT C)
:
TIP: Whenever you see this icon and heading, the associated
text provides a tip for facilitating the installation, testing, or
operation of the equipment or software.
Regulatory Notices
This device has been designed to operate with several different antenna types. The gain of
each antenna type shall not exceed the maximum antenna system gain as given in Appendix
F on page 229. Antennas having a higher gain are strictly prohibited by Industry Canada and
FCC regulations. The required antenna impedance is 50 ohms.
Industry Canada
CCU3000, EUM3000, and EUM3003
The IC Certification Number for the CCU3000 and EUM3000 is 3225104140A. The IC
Certification Number for the EUM3003 is 3225B-EUM3003.
Operators must be familiar with IC RSS-210 and RSS-102. The CCU and EUM have
been designed and manufactured to comply with IC RSS-210 and RSS-102.
Federal Communications Commission
CCU3000, EUM3000, and EUM3003
The CCU3000, EUM3000, and EUM3003 have been designed and manufactured to
comply with FCC Part 15.
Operators must be familiar with the requirements of the FCC Part 15 Regulations prior
to operating any link using this equipment. For installations outside the United States,
contact local authorities for applicable regulations.
The FCC ID for the CCU3000 and EUM3000 equipment is OOX-LMS3000. The FCC
ID for the EUM3003 equipment is OOX-EUM3003.
The transmitter of this device complies with Part 15.247 of the FCC Rules.
The CCU3000, EUM3000, and EUM3003 (with outdoor antenna only) must be
professionally installed.
Interference Environment
Operation is subject to the following conditions:
• This device may not cause harmful interference and,
• This device must accept any interference received, including interference that
might cause undesired operation.