User's Manual Part 1

9: Installing the EUM

APCD-LM043-8.0 (DRAFT C) 147

When you have completed the above tasks, connect the EUM AC/DC adaptor to an AC power

bar or outlet.

Figure 50 Connecting the EUM Components

To Connect the EUM Components

1. Finger-tighten the antenna cable onto the corresponding connector at the back of the

EUM (refer to Step 1 in Figure 50). Do not use wrenches or pliers. Do not cross-thread

or over tighten.

2. Connect the AC/DC adaptor to the EUM. To do this, line up the guides in the DC

power cord connector with the notches in the power plug on the EUM and press the

connector firmly into place (refer to Figure 51).

Figure 51 Connect the DC Power Cord to the EUM

Denotes reserved ports. Do NOT Connect.

AC/DC

Adapter

Power Bar

EUM

Step 1

Antenna Cable

Step 3

AC Cable

Step 2

DC Cable

Antenna

Bracket

Antenna

Connector

DC Power

Connector

Ether

net

Connector