User's Manual Part 1

8: Configuring the EUM
APCD-LM043-8.0 (DRAFT C) 141
The following example
• Sets the SNMP contact as
WaveRider,
• Sets the SNMP location as
Calgary_South,
• Adds the SNMP read community WaveRider_Calgary,
• Adds the SNMP write community
WaveRider_Calgary,
• Adds the SNMP trap server
WaveRider_Calgary, IP address 10.0.1.68,
• Saves the new settings, and
• Displays the SNMP settings.
Example:
60:ff:fe>
60:ff:fe> snmp contact WaveRider
60:ff:fe> snmp location Calgary_South
60:ff:fe> snmp community add WaveRider_Calgary read
60:ff:fe> snmp community add WaveRider_Calgary write
60:ff:fe> snmp trap add 10.0.1.68 WaveRider_Calgary
60:ff:fe>
60:ff:fe> save
Basic Config saved
Port Filter Config saved
sntp cfg file saved
60:ff:fe>
60:ff:fe> snmp
Contact: WaveRider
Location: Calgary_South
Name: LMS3000
SNMP Read Communities:
WaveRider_Calgary
SNMP Write Communities:
WaveRider_Calgary
SNMP Traps:
10.0.1.68 WaveRider_Calgary
60:ff:fe>