User's Manual Part 1

122 APCD-LM043-8.0 (DRAFT C)
7: Configuring the CCU
To Enable SNTP Relay
NOTE: Enabling time relay on a CCU causes the CCU to forward the
time to the EUMs.
1. Type
time relay enable and press Enter.
2. Type
save or commit and press Enter.
60:00:43> time relay enable
Relay enabled.
60:00:43>
To Display the SNTP Configuration and NTP Server List
• Type time print and press Enter.
60:00:43> time print
SNTP Client and Relay Configuration
-----------------------------------
Relay
Enabled : Yes
Destination : Default Net Broadcast. (radio IF)
Send time on...
Boot : Yes
EUM Registration : Yes
Server (send/listen)
Port : 123
Unsynchronized Stratum : 15
Synchronized Stratum : Received NTP Stratum +5
Client (fetch only)
Enabled : Yes
Port : 123
Resync period : 30 seconds.
Retry period : 30 seconds.
NTP SERVERS
-----------------------------------
132.246.168.148
140.162.8.3
136.159.2.1
192.5.5.250
10.0.0.1
-----------------------------------
60:00:43>
To Display System Time
• Type time and press Enter.
60:00:43> time
22-JUL-2002 16:19:01
60:00:43>