User's Manual Part 1

7: Configuring the CCU
APCD-LM043-8.0 (DRAFT C) 119
2. Repeat step 1 for any alternate DHCP servers in your network. WaveRider
recommends that your network have at least one alternate DHCP server.
3. Type
save or commit and press Enter.
The following example
• Enables DHCP relay,
• Adds a DHCP server with IP address 192.168.50.1 /24,
• Adds an alternate DHCP server with IP address 192.168.50.15 /24,
• Saves the new settings, and
• Displays the DHCP status.
60:03:3a> dhcp enable
60:03:3a>
60:03:3a> dhcp relay add 192.168.50.1 24
60:03:3a> dhcp relay add 192.168.50.15 24
60:03:3a>
60:03:3a> save
Basic Config saved
Port Filter Config saved
sntp cfg file saved
Route Config saved
Authorization Database saved
DHCP Server Config saved
60:03:3a>
60:03:3a> dhcp relay
DHCP Relay Enabled:
DHCP Server Table:
DHCP Server Table:
IP Address: 192.168.50.1
Mask : ffffff00
IP Address: 192.168.50.15
Mask : ffffff00
60:03:3a>
7.6 Configuring Port Filtering
To add a port filter
• Determine the port number you want to filter.
• Determine whether you want to filter UDP, TCP, or both types of packets.
• Add the port filter to the CCU.