User's Manual Part 1

118 APCD-LM043-8.0 (DRAFT C)
7: Configuring the CCU
3. Type ip gateway <aaa.bbb.ccc.ddd> <net mask> and press Enter to set the
CCU IP address.
•
<aaa.bbb.ccc.ddd> is the CCU gateway IP address, which is also the IP
address of the gateway router
•
<net mask> is the CCU radio IP address subnet mask
60:06:4e> ip gateway 192.168.60.1. 24
Gateway IP Address: 172.16.6.10
4. Type save and press Enter to save the new settings.
60:06:4e> save
Basic Config saved
Port Filter Config saved
sntp cfg file saved
Route Config saved
Authorization Database saved
DHCP Server Config saved
5. Type reset and press Enter to reboot the CCU.
60:06:4e> reset
rebooting CCU ...
6. On reset, type protocol and press Enter to display the protocol mode.
60:06:4e> protocol
CCU in Through Only Mode
7. Type ip and press Enter to display the ip addresses.
60:06:4e> ip
IP Address: 192.168.60.99 / 24
IP Subnet : 192.168.60.0 < 255.255.255.0 >
Gateway IP Address: 192.168.60.1
7.5 Configuring DHCP Relay
To configure DHCP relay
• Determine the DHCP server IP address.
• Enable DHCP Relay.
• Add the DHCP server to the CCU.
To Enable DHCP Relay
1. Type dhcp enable and press Enter.
2. Type
save or commit and press Enter.
To Add a DHCP Server
1. Type dhcp relay add <aaa.bbb.ccc.ddd> <net mask> and press Enter.
• <aaa.bbb.ccc.ddd> is the IP address of the DHCP server you want to add.
• <net mask> is the net mask of the DHCP server.