User's Manual

APCD-LM043-4.0 175
file copy|cp <source>
<destination>
Copies a file. Use this command only when
upgrading the firmware.
• <source> is the name of the source
file.
• <destination> isthenameofthe
destination file.
file delete <filename> Deletes a file, where:
• <filename> is the name of the file you
want to delete.
file dir|ls Lists the file directory.
file get <aaa.bbb.ccc.ddd>
<username> <password> <source>
<destination>
Retrieves a file from a remote location,
where.
• <aaa.bbb.ccc.ddd> is the IP
address or hostname of the computer
from which you are retrieving the file.
• <username> is the user name required
to log on to the remote computer. (If
there is no username, as with an EUM,
then use the password in place of the
username.)
• <password> is the password required
to log on to the remote computer
• <source> isthepathandfilenameof
thefilethatisbeingretrievedfromthe
remote computer.
• <destination> isthepathand
filename to which the file will be copied.
file mkboot|makeboot <filename> Makes a new boot file, where:
• <filename> is the name of the new
boot file.
file rename|rn <old file name>
<new file name>
Renames a file, where:
• <old file name> is the old file
name.
• <new file name> is the new file
name.
help Displays the console command structure.
ip Displays the EUM IP address assignments.
ip ethernet Displays the EUM IP address and netmask,
the same for both the radio and Ethernet
port.
Command Syntax (EUM) Command Description