User's Manual

174 APCD-LM043-4.0
EUM Command-line Syntax
Table 47 EUM Command-Line Syntax
Command Syntax (EUM) Command Description
arp Displays the ARP Table.
arp add <aaa.bbb.ccc.ddd>
<XX:XX:XX:XX:XX:XX> [flags]
Adds an entry to the ARP table, where.
• <aaa.bbb.ccc.ddd> is the IP
address.
• <XX:XX:XX:XX:XX:XX> is the
Ethernet address, in hexadecimal
format.
• [flags] is always set to 4, meaning
the entry is permanent and doesn’t time
out, as long as the CCU or EUM is ON.
arp del <aaa.bbb.ccc.ddd> Deletes an entry from the ARP table, where.
• <aaa.bbb.ccc.ddd> is the IP
address of the entry.
arp flush Clears the ARP table.
arp map Displays the ARP Map Table.
arp map <aaa.bbb.ccc.ddd> Maps MAC address to IP address
<aaa.bbb.ccc.ddd>. The MAC address
is obtained from the ARP Table, or by
sending out an ARP request.
bcf Displays the basic configuration file (BCF).
cust Displays the Customer Table.
cust flush Removes all entries from the Customer
Table.
cust max Displays the maximum number of
customers.
cust max <value> Sets the maximum number of customers,
where:
• <value> is the maximum number of
customers, from 1-50.
exit|quit Exits the current console session and
returns to the password prompt.
file ? Lists the file system utilities.