User's Manual

166 APCD-LM043-4.0
arp map Displays the ARP Map Table.
arp map <aaa.bbb.ccc.ddd> Maps MAC address to IP address
<aaa.bbb.ccc.ddd>. The MAC address
is obtained from the ARP Table, or by
sending out an ARP request.
auth Displays the Authorization Table.
auth add <eum id> <gos> Adds an EUM to the Authorization Table,
where:
• <eum id> is the EUM ID, formatted in
hexadecimal as XX:XX:XX.
• <gos> is the EUM grade of service, for
example, gold.
auth default <gos> Sets the default GOS, which is the GOS
assigned to an EUM on registration, where.
• <gos> is the default grade of service,
for example, bronze.
auth del <eum id> Removes an EUM from the Authorization
Table, where:
• <eum id> is the EUM ID, formatted in
hexadecimal as XX:XX:XX.
auth gos <gos> Displays the GOS definitions, where:
• <gos> is the grade of service, for
example, bronze.
bcf Displays the basic configuration file (BCF).
dhcp Displays status of CCU DHCP Relay, either
enabled or disable.
dhcp disable Disables DHCP relay.
dhcp enable Enables DHCP relay.
dhcp relay Displays the CCU DHCP relay status and
contents of the DHCP Server Table.
dhcp relay add <aaa.bbb.ccc.ddd>
<net mask>
Adds the DHCP server IP address, where:
• <aaa.bbb.ccc.ddd> is the IP
address of the DHCP server.
• <net mask> is the net mask of the
DHCP server.
dhcp relay del <aaa.bbb.ccc.ddd> Deletes the DHCP server IP address,
where:
• <aaa.bbb.ccc.ddd> is the IP
address of the DHCP server.
dhcp relay flush Flushes the DHCP server IP addresses.
Command Syntax (CCU) Command Description