User's Manual

Table Of Contents
APCD-LM043-4.0 165
CCU Command-line Syntax
Table 46 CCU Command-Line Syntax
Command Syntax (CCU) Command Description
add Displays the Address Table.
add flush Removes all entries from the Address
Table.
add rem <eum id> Removes an EUM ID from the Address
Table, where:
<eum id> is the EUM ID, formatted in
hexadecimal as XX:XX:XX.
air Displays the Registration Table.
air associations Displays the maximum association count.
air delete <eum id> Deletes an EUM from the Registration
Table, where:
<eum id> is the EUM ID, formatted in
hexadecimal XX:XX:XX.
air dereg Displays the deregistration count.
air dereg <value> Changes the deregistration count, where:
<value> is the deregistration count,
from 1 to 254.
air fdereg <eum id> Forces deregistration of an EUM, where:
<eum id> is the EUM ID, formatted in
hexadecimal as XX:XX:XX.
air flush Flushes the Registration Table.
arp Displays the ARP Table.
arp add <aaa.bbb.ccc.ddd>
<XX.XX.XX.XX.XX.XX> [flags]
Adds an entry to the ARP Table, where.
<aaa.bbb.ccc.ddd> is the IP
address of the new entry.
<XX:XX:XX:XX:XX:XX> is the
Ethernet address, in hexadecimal
format.
[flags] is always set to 4, meaning
the entry is permanent and doesn’t time
out, as long as the CCU or EUM is ON.
arp del <aaa.bbb.ccc.ddd> Deletes an entry from the ARP Table:
<aaa.bbb.ccc.ddd> is the IP
address of the entry being deleted.
arp flush Clears the ARP Table.