User's Manual

Table Of Contents
8 Configuring the EUM
100 APCD-LM043-4.0
CAUTION: The EUM only accepts subnet masks using the
shorthand notation; for example, it accepts 16’, but not
ffff0000’or‘255.255.0.0’.
2. Type save or commit and press Enter.
3. Before the new EUM Ethernet IP address will take effect, you must reboot the EUM by
typing reset and pressing Enter.
To set the EUM gateway IP address
1. The EUM gateway is the CCU radio, so the EUM gateway IP address is the CCU
radio IP address.
2. Type ip gateway <aaa.bbb.ccc.ddd> and press Enter.
<aaa.bbb.ccc.ddd> is the CCU radio IP address.
3. Type save or commit and press Enter.
4. Before the new EUM gateway IP address will take effect, you must reboot the EUM by
typing reset and pressing Enter.
Example:
The following example
Sets the EUM Ethernet IP address to 10.0.4.48 / 16,
Sets the EUM gateway IP address to 10.5.0.1,
Saves the new settings,
Reboots the EUM so that the new parameters take effect, and
Displays the EUM IP parameters.
Console>
Console> ip ethernet 10.0.4.48 16
Console> ip gateway 10.0.0.1
Console>
Console> save
Basic Config saved
Port Filter Config saved
sntp cfg file saved
Console>
Console> reset
rebooting EUM ...
(... Power On Self Test ...)
WaveRider Communications, Inc. LMS3000
Password:
Console> ip
Ethernet IP Address: 10.0.4.48
Ethernet Net Mask : ffff0000
Gateway IP Address: 10.0.0.1
Radio IP Address: 10.5.0.1
Radio Net Mask : ffff0000
Console>