User's Manual

7 Configuring the CCU
92 APCD-LM043-4.0
• Adds a local NTP server, IP address 10.0.0.1,
• Sets the resynchronization time to 3600 seconds,
• Sets the retry time to 30 seconds,
• Enables the SNTP client,
• Enables the SNTP relay,
• Saves the new entries,
• Displays the SNTP configuration and NTP server list, and
• Displays the system time.
Example:
Console> time flush
Console> time add 127.0.0.1
Console> time add 10.0.0.1
Console> time client resync 3600
Console> time client retry 30
Console> time client enable
Console> time relay enable
Console>
Console> save
Basic Config saved
Port Filter Config saved
sntp cfg file saved
Route Config saved
Authorization Database saved
DHCP Server Config saved
Console>
Console> time print
SNTP Client and Relay Configuration
-----------------------------------
Relay
Enabled : Yes
Destination : Default Net Broadcast. (radio IF)
Send time on...
Boot : Yes
EUM Registration : Yes
Server (send/listen)
Port : 123
Unsynchronized Stratum : 15
Synchronized Stratum : Received NTP Stratum +5
Client (fetch only)
Enabled : Yes
Port : 123
Resync period : 3600 seconds.
Retry period : 30 seconds.
NTP SERVERS
-----------------------------------
10.0.0.1
127.0.0.1
-----------------------------------
Console>
Console> time
28-FEB-2002 17:03:30
Console>