User's Manual

7 Configuring the CCU
APCD-LM043-4.0 87
To set the CCU radio IP address
1. Type ip radio <aaa.bbb.ccc.ddd> <net mask> and press Enter.
• <aaa.bbb.ccc.ddd> is the CCU radio IP address.
• <net mask> is the net mask.
2. Type save or commit and press Enter.
3. Before the new CCU radio IP address will take effect, you must reboot the CCU by
typing reset and pressing Enter
NOTE: The CCU Ethernet and gateway IP addresses must be on the
same subnet, as explained in LMS4000 IP Addressing on page
53.
To set the CCU gateway IP address
1. Type ip gateway <aaa.bbb.ccc.ddd> and press Enter.
• <aaa.bbb.ccc.ddd> is the CCU gateway IP address.
2. Type save or commit and press Enter.
Example:
The following example
• Sets the CCU Ethernet IP address to 10.0.4.48 / 16,
• Sets the CCU radio IP address to 10.5.0.1 / 16,
• Sets the CCU gateway IP address to 10.0.0.1,
• Saves the new settings,
• Reboots the CCU so that the new parameters take effect, and
• Displays the CCU IP parameters.
Console>
Console> ip ethernet 10.0.4.48 16
Console> ip radio 10.5.0.1 16
Console> ip gateway 10.0.0.1
Console>
Console> save
Basic Config saved
Port Filter Config saved
sntp cfg file saved
Route Config saved
Authorization Database saved
DHCP Server Config saved
Console>
Console> reset
rebooting CCU ...
(... Power On Self Test ...)
WaveRider Communications, Inc. LMS3000
Password:
Console>
Console> ip
Ethernet IP Address: 10.0.4.48