Size:120X170mm User Manual Of Digital Set Top Box VEA T100 Please read this User Manual carefully to ensure proper use of this product and keep this manual for future reference.
Safety Instructions Always read the safety instructions carefully Keep this User's Manual for future reference Keep this equipment away from humidity Lay this equipment on a reliable flat surface before setting it up. Do not stand it on soft furnishings. If any of the following situation arises, get the equipment checked by a service technician: The equipment has been exposed to moisture. The equipment has been dropped and damaged. The equipment has obvious sign of breakage.
Table of Contents Introduction .......................................................................... 1 Front and Rear Panel............................................................. 2 Remote Controller ................................................................. 3 Connections...........................................................................5 First Time Installation............................................................. 7 Basic Operations ..........................................
Introduction This DVB-T TV Receiver is a Free-To-Air digital terrestrial receiver, allowing you to access free-to-air digital terrestrial TV channels and radio broadcasts on your TV set. Its digital reception covers VHF & UHF band. Compared with the analog TV programs, digital TV programs eliminate the noise and interference but offer high quality video and audio. An on-screen initial installation guide is provided so that you can easily start to enjoy watching the programs.
Front Panel and Rear Panel 1. Front panel CHANNEL VEA T100 1 2 3 4 POWER: Used to turn on/off the main power supply. STANDBY INDICATOR: Used to visually show power state of the set top box, the green LED will be light if turned on the set top box and the red LED will be light if the set top box entered standby mode. REMOTE CONTROL SENSOR: Used to receive the signal from the remote control. CHANNEL UP/DOWN: Used to change channels without using the remote control.
Remote Controller Remote Key Function: DTV/VCR STANDBY MUTE PAUSE INFO EPG MENU CH+ EXIT OK VOL - VOL + CH- FAVORITE 1 2 3 4 5 6 GAME RECALL 7 8 9 0 TV/RADIO AUDIO SUBTITLE TEXT 1. DTV/VCR Used to switch between the VCR SCART input and the DTV output mode. 2. INFO Used to display information about the channel being viewed or further information about the program when in small EPG screen. 3. PAUSE Used to pause or playback the program being viewed . 4.
Installing the Batteries Remove the battery cover from the remote control and put 2XAAA size batteries inside the compartment. The diagram inside the battery compartment shows the correct way to install the batteries. 1.Open the cover O PE 3.Close the cover 2.Install batteries N O PE N Using the Remote Control To use the remote control, point it towards the front of the digital set top box The remote control has a range of up to 7 metres from the set top box at an angle of up to 60 degrees.
Connections Caution: Make sure to check the voltage specification of the wall outlet is the same rating with the receiver. To prevent the risk of electric shock, do not open the cover or the back of the receiver.
Connecting to TV and VCR TV VCR Note: When connecting the receiver to other equipment, e.g., TV, VCR and amplifier, make sure to refer to relevant user manual for instruction. Also, make sure you disconnect all the equipments from the mains supply before the connection.
First Time Installation After all the connections have been made properly, switch on your TV. Make sure the receiver is connected to the mains and press Power to switch the receiver on. If you are using the receiver for the first time, a First Time Installation menu will be displayed to guide you through the initial setup. Use the remote controller to finish the setup. 1. At the First time installation menu, select YES and press OK on the remote controller to proceed.
3. Select Yes to start the automatic channel search. First Time Installation (2) Do you want to start Auto Search? Previous channel list will be replaced. YES BACK NO 4. Wait to complete the scanning. In case you want to stop the scanning, press the EXIT key. The channels already found will still be stored. Automatic Search Progress 30% Channel No 33 Frequency 587.0 MHz TV List : TTV-1 TTV-2 HAKKA 013 Music List : G-Guide RAIL WAY 002 5.
Basic Operations Once program search is completed, you can start to watch digital terrestrial TV channels and radio broadcasts. Some typical operations are given in this chapter. Switching On and Off Whenever you are not using the receiver, press the Standby key on remote control or button on the receiver to put it into standby mode. Changing Channels To switch between different channels, you can: Press OK to display the channel list and UP/DOWN to select a desired channel. TV Program List No.
Watching Favorite List You can press FAVORITE to watch your preset favorite channels. To create your favorite list, go to Main Menu > Program List. Refer to Creating Favorite Channel Groups on page 13 for detailed information. Displaying information To display the detailed information of the current channel, press the INFO key.
Displaying EPG To view the EPG (electronic program guide) provided by the content provider: 1. Press the EPG key and then use the Up / Down key highlight a desired channel to preview the EPG. To view today's complete EPG, press the Right key. TV Program List No. 18 19 20 21 22 Program Name The HITS , UKTV Br tIdea f tn TMF Ideal World 2006/06/23 15:36 Fashion on Friday at 4 and 5 16:00-18:00 The Quattro Gem Collection 18:00-19:00 2.
4. To exit the detailed EPG screen, press the Left key. Displaying Text Press the TEXT key to open a teletext page (if teletext is transmitted). Press TEXT key again to close it. Selecting Sound Mode To switch the sound mode between LL (left), RR (right) and LR (stereo), press the Audio key.
Using the On-Screen Setup Menu The receiver features an on-screen menu providing access to a variety of setup and management controls. Use the remote controller to navigate through the menu and activate required settings. Managing Program List Main Menu > Program List > TV / Radio Program List All active channels are listed in the Program List, allowing you to make your own favorite channel group, move, delete or sort channels.
Moving a Channel 1. Select the channel which you like to move and go to the Move column. 2. Press OK and symbol will be displayed. 3. Use the Up / Down key to move the channel to a desired position. Program edit table No. 1 2 3 4 5 6 7 8 9 10 Program Name DIMO FTV FMTV FTVN TTV-1 TTV-2 HAKKA CTS CTS-IQ CTS-EQ Favor Move Del Deleting a Channel 1. Select the channel which you like to delete and go to the Del column. 2. Press OK and an X symbol will be displayed.
Sorting Channels 1. Go to Main Menu > Program List > Sort. 2. You can sort the channels by the channel name, service ID or channel number. Select one method as required. Sort 3. Press MENU or EXIT to return the program list. The list is now sorted by the specified order. Program Search Automatic Search 1. Enter the Automatic Search menu via Main Menu > Program Search > Automatic Search. 2. Select OK to start auto search. Warning Do you want to start Auto Search? OK Cancel 3.
4. Wait to complete the scanning. In case you want to stop the scanning, press the EXIT key. The channels already found will still be stored. Automatic Search Progress 30% Channel No 33 Frequency 587.0 MHz TV List : TTV-1 TTV-2 HAKKA 013 Music List : G-Guide RAIL WAY 002 5. When finished, the last found channel will be played. Manual Search If any channel is missing after auto search, or you want to add newly launched channels, you can use Manual Search to scan the desired channels.
Parental Control This feature allows you to prevent children or unauthorized people from watching channels. 1. Go to Main Menu > Parental Control. First, you will need to enter PIN as prompted to use the parental control menu. (The default PIN is 6666.) Enter Parental PIN Enter PIN OK 2. After correct PIN input, the following options are provided: Parental Control Channel Lock Parental Setting Change PIN Channel Lock: Allows you to activate or de-activate the overall parental control.
Change PIN: Allows you to change the PIN. A PIN can be composed of 1 to 4 digits. To change the PIN, enter the old, new PIN in the provided fields. After pressing OK, a message indicating PIN Code Changed will appear. Change Parental PIN Old PIN New PIN Confirm New PIN OK Note: To activate the parental control feature, Channel Lock must be set to YES. If you want to lock particular channels while keeping other channels unlocked, use Parental Setting table to make the settings.
System Settings TV Standard This option allows you to select your TV system among PAL, NTSC and Auto. TV Standard PAL NTSC AUTO Display Type This option allows you to select the aspect ratio of the video output. If you are using normal 4:3 TV, it is OK to view the regular 4:3 content being broadcasted. But occasionally broadcasters transmit widescreen content; in this situation, you can choose how to display it in a conventional TV set. 4:3 LB (Letterbox) For conventional 4:3 TV.
Display Type 4:3 PS 4:3 LB 16:9 Video Output Set the video mode as CVBS or RGB. Video Output CVBS RGB Antenna Power The default setting is OFF. Set this option to ON if this receiver box is connected to an external active antenna that amplifies the received signal. This receiver box can supply 5V DC at 50mA maximum. Caution: If you are using a normal passive antenna, make sure to set this setting to OFF . Antenna Power OFF ON Regional Setting Region: Select the region or country you are located.
Regional Setting England Region English OSD Language CMT+00:00 Time Zone Language OSD Language: Select the on-screen-display language as required. 1 st /2nd Audio Language: This option allows you to select your first and second choice for the audio language. If neither of your selected language is available on the program transmitted, the main language of the program will be used. You can alternatively press the AUDIO key to use another available language.
System Schedule This feature allows the receiver to automatically switch on and tune to a pre-specified channel for a pre-set length of time. You can use this feature to schedule recording if your receiver is connected to a VCR or recorder or as reminders of certain programs. Up to 10 tasks can be scheduled. 1. In the Schedule pane, use the Up / Down key to select a task and use Right / Left key to switch between Inactive and Active. 2. Press OK to enter the Detail pane. 3.
System Information Version: v1.08 212u_IO_LG_9013_0.1.7.1 Date:MM/DD/YYYY Factory Default This option allows you to resume factory defaults. 1. To reset defaults, select OK. Factory Default NO YES Warning Do you want to set factory default? Cancel OK 2. All programs you have searched will be erased and all parameters, e.g., the regional settings, languages and favorite lists, will return to the factory default. 3.
Personal Style This option allows you to customize the menu settings. You can set the Menu Color, Transparency level, Border Pattern and Entry Animation as preferred.
Troubleshooting If you experience problems with this receiver or its installation, in the first instance please read carefully the relevant sections of this User Manual and this Troubleshooting section.
Specifications 26
VEA T100
1
CHANNEL VEA T100 Digital Audio R F IN R F LOOP THROUGH Serial No.
DTV/VCR STANDBY MUTE PAUSE INFO EPG MENU CH+ EXIT OK VOL - VOL + CH- FAVORITE 1 2 3 4 5 6 GAME RECALL 7 8 9 0 TV/RADIO AUDIO SUBTITLE TEXT 3
1.Open the cover O PE 3.Close the cover 2.
TV 100-240V~ 50/60Hz 5
TV 100-240V~ 50/60Hz VCR 6
First Time Installation Do you want to start first time Installation Wizard? YES NO First Time Installation (1) Region England English Language GMT + 00:00 Time Zone Antenna Power BACK OFF NEXT 7
First Time Installation (2) Do you want to start Auto Search? Previous channel list will be replaced. YES BACK NO Automatic Search Progress 30% Channel No 33 Frequency TV List : TTV-1 TTV-2 HAKKA 587.
TV Program List TV No. 1 2 3 4 5 6 7 8 Program Name DIMO FTV FMTV FTVN TTV-1 TTV-2 HAKKA CTS 13 HAKKA LR TV/Radio Channel Name Channel No.
Program Info Program Name HAKKA Program No Channel No 11 32 Frequency 581 Modulation QAM16 Hierarchy Mode Guard Interval Transmit Mode Strength 17% Quality 67% 8k Video PID Audio PID HP Code Rate LP Code Rate Subtitle Language ENG OFF 10 4021 4022 0 2/3
TV Program List No. 18 19 20 21 22 Program Name The HITS , UKTV Br tIdea f tn TMF Ideal World 2006/06/23 15:36 Fashion on Friday at 4 and 5 16:00-18:00 The Quattro Gem Collection 18:00-19:00 TV Program List 2006/06/23 Ideal World No.
Audio channel Channel Audio 1 Audio PID 4012 Sound Mode LR 12
Program edit table No.
Program edit table No. 1 2 3 4 5 6 7 8 9 10 Program Name DIMO FTV FMTV FTVN TTV-1 TTV-2 HAKKA CTS CTS-IQ CTS-EQ No.
Sort Warning Do you want to start Auto Search? OK Cancel Warning Do you want to erase your previous channel list? YES NO 15
Automatic Search Progress 30% Channel No 33 587.0 MHz Frequency TV List : TTV-1 TTV-2 HAKKA 013 Music List : G-Guide RAIL WAY 002 Manual Search Channel No. 28 Frequency 557.
Enter Parental PIN Enter PIN OK Parental Control Channel Lock Parental Setting Change PIN YES NO Parental Setting No.
Change Parental PIN Old PIN New PIN Confirm New PIN OK Enter Parental PIN Enter PIN 18
TV Standard PAL NTSC AUTO 19
Display Type 4:3 PS 4:3 LB 16:9 Video Output CVBS RGB Antenna Power OFF ON 20
Regional Setting England Region English OSD Language CMT+00:00 Time Zone Language OSD Language English 1st Audio Language English 2nd Audio Language English OFF Subtitle Language Time Setting GMT usage ON Time Zone CMT+00:00 21
Schedule Task1 Task2 Task3 Task4 Task5 Task6 Task7 Task8 Task9 Task10 Active Inactive Inactive Inactive Inactive Inactive Inactive Inactive Inactive Inactive Detail Mode Start Date Daily 2005/06/06 Start Time 00:00 Eng Time 00:00 Channel Type Channel No 22 TV 0001
System Information Version: v1.08 212u_IO_LG_9013_0.1.7.1 Date:MM/DD/YYYY Factory Default NO YES Warning Do you want to set factory default? Cancel OK System Update Status Initializing Tansmission 000% Burn 000% Press Any Key to Exit.
Personal Style Menu Color Blue Transparency Level 8 Border Pattern Round Entry Animation Right 24
25
26
