User`s manual

LVS5066 User’s Manual
---------------------------------------------------------------------------------------------------
LED VIDEO PROCESSOR
15
3. Output image setup
LVS5066 outputs images from DVI OUT1 and DVI OUT2. There are 3
output formats as listed in the table below. User can enter the No.6 setup
item “Out Format” to select one of them.
Format
1 1024×768_60
2 1280×1024_60
4 1920×1080_60
Item 6: “Out Format”
Press “←” or “→” key to select 1 output format listed under this
option, then press “Enter” to save it.
If you select “1024×768_60”, the output resolution of LVS5066 will
be 1024×768; the vertical refresh rate is 60Hz.
However, the resolution of LED screen is not exactly 1024×768
pixels. When the resolution of LED screen is less than 1024×768
pixels, we can set LVS5066 to output the images exactly fitting the
resolution of LED screen, so that the LED could display a full frame of
image. See the schematic diagram below:
Figure 4
(0，0)
Hor_Str Hor_Width
Vert_St r
Vert_Height
LED Dispaly Screen
LVS5066 Out Format =
1024×768
LVS5066 Out Image Area
1024
768