User`s manual

LVS5066 User’s Manual
---------------------------------------------------------------------------------------------------
LED VIDEO PROCESSOR
10
LVS5066 supports 4 WIPE modes. Press WIPE1, WIPE2,
WIPE3 while in operation mode, LVS5066 will enter corresponding
wipe mode, the moment corresponding mode will appear in LCD
(e.g.: “Switch Mode= Wipe: L → R”). Table below lists the
descriptions of each switching mode and their respective operation
buttons:
Switching
direction
Description of mode Buttons
L→R Wipe from the left toward the right
L←R Wipe from the right toward the left
WIPE1
(as
described
in note)
L←M→R Wipe from the centre toward both
sides
WIPE2
RECT
If it is a square, wipe from the
centre perimeter
WIPE3
Note: Both L→R and L←R modes (as described in above
table) are operated using WIPE1 button. User can press this button
to switch the modes.
9) PIP / POP
LVS5066 has PIP function, that is to say, it can add a zipped
picture (PIP) to current picture (background). The PIP can be
switched between the 6 channels including the background. User
can preset the size of 4 PIPs switch between them. The switching
between PIPs is made in Fade-in/Fade-out(MIX) mode.
Operating procedures:
Enter PIP display mode: press PIP button while in any mode,
LVS5066 will enter PIP mode, in the meantime, the information on
the background channel and the position and channel of PIP to be
added will appear in LCD, e.g.: “Background=CH2，PIP_3=CH5”.
Select PIP: while in PIP mode, select 1 channel from the 6
channels, the picture in this channel will be set as PIP.
Change position of PIP window: press PIP button while in
PIP mode, the position of the PIP in LCD will become vacant, e.g.:
“Background=CH2，PIP_3=CH”. Press PIP again, PIP will move to
another position. When PIP arrives at the position you selected
(e.g.: PIP_4), reselect PIP channel (e.g.: CH1), the PIP will appear
in the new position after a Fade-in/Fade-out action (the moment