LedControlCard.com Focus On led card and led video processor LVS5066 LED HD Seamless Switcher USER’S MANUAL www.ledcontrolcard.com led control website.
LVS5066 User’s Manual TABLE OF CONTENTS I. Safety precautions 3 II. Connections of hardware 1. Rear view 2. Port description 3. Connection diagram 4 5 6 III. Frontal panel operations 1. Diagram of frontal panel 2. Button instructions (operation mode) 7 7 IV. Setup 1. Enter setup 2. Select language 3. Output image setup 4. Brightness / color 5. PIP and Text_Overlay setup 6. Exit setup 7. Factory district setup 13 13 14 15 15 17 18 V. Specifications 19 VI．Notes to model……………………………………………………………….
LVS5066 User’s Manual I. Safety Precautions Danger! There is high voltage in the processor, to prevent any unexpected hazard, unless you are maintenance, please do not open the cover of the device. Warning! 1. This device shall not encounter water sprinkle or splash, please do not place anything containing water on this device. 2. To prevent fire, keep this device far from any fire source. 3.
LVS5066 User’s Manual II. Connections of hardware 1.
LVS5066 User’s Manual 2. Port description 1） Video Input LVS5066’s signal input employs plug & play design, the type and number of input image signals are configurable based on user’s demand. Each image capture card is arranged with one channel (as shown in figure below). Now HD Seamless Switcher is configured with 4 or 6 pieces of image capture cards.
LVS5066 User’s Manual 3.
LVS5066 User’s Manual III. Frontal panel operations 1. Diagram of control panel Figure 2 2. Button instructions (operation mode): There are 65 buttons on the control panel of LVS5066, of which 45 buttons on the left are used to switch input signals. The 20 buttons on the right are function and setting buttons, used for mode switching or settings. 1) Select input video source LVS5066 has 6 channels, their buttons are Ch1, Ch2, ……Ch6 respectively. Each channel is furnished with 6 operation buttons.
LVS5066 User’s Manual Notes: LVS5066 adopts 2-level switching architecture. Level 1 switching is input pre-selection switching, namely the switching among 4 signals in a single channel; Users can proceed to level 2 switching namely switching between channels until all inputs pre-selection of each are completed. which is used to realize a series special switching effects such as seamless switching, fading-in/out, WIPE or used to select PIPs. Seamless switching can be realized among signals in channels.
LVS5066 User’s Manual button again before the information disappears in LCD, the next entry of information will appear in LCD. 5) CUT mode LVS5066 will automatically enter seamless switching mode after startup. Now the indicator is ON. If the moment LVS5066 is in other switching modes, you can press CUT button to enter seamless switching mode. The system will realize seamless switching between the six channels, i.e.: Ch1, Ch2…Ch6.
LVS5066 User’s Manual LVS5066 supports 4 WIPE modes. Press WIPE1, WIPE2, WIPE3 while in operation mode, LVS5066 will enter corresponding wipe mode, the moment corresponding mode will appear in LCD (e.g.: “Switch Mode= Wipe: L → R”).
LVS5066 User’s Manual “Background=CH2，PIP_4=CH1” will appear in LCD). Change the background: you must first switch LVS5066 into CUT mode, then select a channel you desire as background, and press PIP to enter PIP mode, and next, reselect PIP. 10) Text overlay mode (Text) LVS5066 provides text overlay function: first switch into CUT mode, then select a channel you desire as background, then press Text to enter text overlay mode, and next, select the channel of the text.
LVS5066 User’s Manual 11） Preview multi pictures display model( Preview ?, OK) LVS5066 not only can show the current chosen input signal of the six channels, also its preview output can support 7 kinds multi pictures display. These displays are from CH1-CH4 which can be realized by connecting DVI to CH5 or CH6, then to LED screen by pressing cut button. The operation method is as follow: Press “Preview?” button in succession to cut display modes.
LVS5066 User’s Manual Category 1 Select language 2 Output Image Setup 3 4 5 Brightness / Color PIP/POP setup Factory district Setup Items 1 Language 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 Hori_Start Hori_Width Vert_Start Vert_Height Out_Format Brightness Color Out_PIP1_H_Start Out_PIP1_H_ Width Out_PIP1_V_Start Out_PIP1_V_ Heigh Out_PIP2_H_Start Out_PIP2_H_ Width Out_PIP2_V_Start Out_PIP2_V_ Heigh Out_PIP3_H_Start Out_PIP3_H_ Width Out_PIP3_V_Start Out_
LVS5066 User’s Manual “Password: 8 Enter Setup …” will appear in LCD, LVS5066 will enter the No.1 setup item.
LVS5066 User’s Manual 3. Output image setup LVS5066 outputs images from DVI OUT1 and DVI OUT2. There are 3 output formats as listed in the table below. User can enter the No.6 setup item “Out Format” to select one of them. Format 1024×768_60 1280×1024_60 1920×1080_60 1 2 4 Item 6: “Out Format” Press “←” or “→” key to select 1 output format listed under this option, then press “Enter” to save it.
LVS5066 User’s Manual As above figure shows: the size and location of LVS5066 output images are defined by 4 groups of parameters, which correspond to four setting items respectively, for details of their relationship see Table 5 below: No. of setup item 2 3 4 5 Setting Item Name Hori_Start Hori_Width Vert_Start Vert_Height Names of parameters Hor_Str Hor_Width Vert_Str Vert_Height The start coordinates (0, 0) of LVS5066 output image is defined in the left top of 1024×768 pixels output area.
LVS5066 User’s Manual 5. PIP/POP setup Items 9~24: “PIP image output setup” As in PIP mode the PIP image is to be zoomed-in/out after being added to background, so the following 4 values listed in the table below don’t represent PIP’s number of pixels in LED screen, but represent the width and height values of “Out_Format”, option 6 of the menu. See figure below (provided output resolution “Out_Format” is 1920×1080 mode). No.
LVS5066 User’s Manual Items 25~28: “Set PIP image in current channel” The signals in each channel of LVS5066 can realize PIP function. And users can set the PIP size and position in each channel. The size and position of current PIP pictures are decided by 4 group parameters. The related settings are as belows: No.
LVS5066 User’s Manual Press “↑” to move to the last item: “ Exit setup”, then press “ ←” or “ →” to select “ YES ”, then press “ Enter” to exit setting mode. If you press “ Setup” key while in any setup mode, the system will skip to the item 80. 10. Factory district setup The following settings must be made by relevant qualified technicians or the guidance of the plant technician, otherwise the incorrect and improper operation will result to abnormal situation.
LVS5066 User’s Manual LVS5066 can improve problems as follow mentioned by adjusting the “ Bias”, whose limit ranging from 0 to 32. When losing the signal of dark scene, you can restore the drop-out information to the LED display by increasing the value.
LVS5066 User’s Manual V. Specifications Inputs Nums/Type Video system Composite Video Scope/Impedance VGA Format VGA Scope/Impedance DVI /HDMI Format ( HDCP ) SDI format HDSDI format Input Connectors 6×composite video 6×VGA（RGBHV） 6×DVI/HDMI 6×SDI（HDSDI） PAL/NTSC 1V (p_p) / 75Ω PC (VESA) ≤1600x1200 @60HZ R, G, B = 0.
LVS5066 User’s Manual Operating Temp Humidity dimensions Weight 5-40 ℃ 15-85% 178 mm (high) ×344mm (wide) × 490mm (length) 12 Kg (N.W.) VI. Notes to model LVS50*6：* represents number of capture card. For example, if there are 6 channels of capture card, the model will be LVS5066.
