Safety Information

2. Place the test light above the contact point.
3. Open the application, press the adjuster on the remote control, and after staying for
0.5s, the function level at the stay will be activated.
4. The test light will flash.
5. Turn off the bark cola. Store the test lamp for future testing.
Note: If the test light does not flash, please charge the battery and test again.
（展示图：1、测试塑料头的过程-等待拍摄）
STEP3: Fit the Smart Bark Collar
Important: The proper fit and placement of your Bark Collar is important for effective
operation
To ensure a proper fit , please folow these steps :
1. Make sure that the Receiver Collar is turned off .
2. Start with your dog standing comfortably .
3.Place the Bark Collar on your dog ’ s neck close to the ears . Center the Contact
Points underneath your dog＇s neck .
4.Check the tightness of the Bark Collar by inserting one finger between the collar and
your dog＇s neck . The fit should be snug but not constricting .
(展示图:戴在狗脖子上的场景)
Note : It is sometimes necessary to trim the hair around the Contact Points to make sure
that the contact electrodes delivers effective static .
Automatic recognition of pets' bark and bark control function
STEP1:Pair the Yuuki Bark Collar with your phone .
1) Open Bluetooth and the APP on your phone , and follow the instructions .
2) Please turn on the colar first , by pressing the power button for more than 1second .
3) The system will automatically pair, and after the pairing is successful, other functions
such as settings will be displayed normally in the APP
STEP2:After connecting Bluetooth, click to open the second page: stop barking
1. On the second page of stop barking, after adjusting to a functional level suitable for
your pet, turn on Automatic barking stop on to activate the stop barking function.
2. After recognizing your pet's call, DR.yuuki will start work, and will use the function level
you set to work to quiet your pet.