Technical information

194
Practical information
508_en_Chap08_info-pratiques_ed02-2014
Putting the wheel back in place
F Put the box back in place in the centre of
the wheel and clip it.
F Put the polystyrene storage box back in
place.
F Put the wheel back in its housing.
F Unscrew the (coloured) central bolt by a
few turns then put it in place in the centre
of the wheel.
F Tighten fully until the central bolt clicks to
retain the wheel correctly.
Tyre under-ination
detection
The spare wheel (space-saver or steel
rim) does not have a sensor.
The punctured wheel must be repaired
by a PEUGEOT dealer or a qualified
workshop.