Technical information

192
Practical information
508_en_Chap08_info-pratiques_ed02-2014
Changing a wheel
The tools are installed in the boot under the
floor.
To gain access to them:
F open the boot,
F position the floor vertically (SW: in its
guide) for access to the tools.
Procedure for changing a faulty wheel for the spare wheel using the tools provided with the vehicle.
List of tools
All of these tools are specific to your
vehicle and can vary according to the level
of equipment. Do not use them for other
purposes.
1. Wheelbrace.
For removing the wheel trim and removing
the wheel bolts.
2. Jack with integral handle.
For raising the vehicle.
3. "Bolt cover" tool.
For removing the bolt protectors (covers)
on alloy wheels.
4. Socket for the security bolts (located in the
glove box).
For adapting the wheelbrace to the special
"security" bolts.
5. A wheel chock for immobilising the vehicle*.
6. Towing eye.
See "Towing the vehicle".
Access to the tools
* Depending on country of sale or equipment.