Technical information

4
129
Driving
Memorising speeds
You can memorise up to 5 speeds in the
system.
By default, some speeds are already
memorised.
F Go to the "Main menu" in the instrument
panel screen by pressing the "CONFIG"
button.
F Select the "Vehicle parameters" menu
and confirm.
F Select the "Driving assistance" line and
conform.
F Select the "Speeds memorised" line and
confirm.
To select a memorised speed:
F press and hold the "+"
or "-" button; the system
stops at the nearest
memorised speed,
For safety reasons, the driver must
carry out these operations when
stationary, using the instrument panel
screen.
These operations are only possible
when stationary.
Operation
F Select "Activation" to use the memorised
speeds.
F Select the speed M1 to M5 that you want to
use.
F Move the cursor to the desired value then
press "CONFIG" to modify it.
F Select "OK" and confirm to save the
modifications.
Selection
F press and hold again the "+" or "-" button to
select another memorised speed.
A reminder of the speed and the state of the
system (on / off) is displayed in the instrument
panel.
This memorising of speeds applies to both the speed limiter and the cruise control.