Technical information

116
Driving
Electronic gearbox
Six-speed electronic gearbox which offers a
choice between the comfort of fully automatic
operation or the pleasure of manual gear
changing.
There are two driving modes:
- automated mode for automatic control of
the gears by the gearbox,
- manual mode for sequential gear changing
by the driver.
In automated mode, it remains possible to
change gear manually by using the steering
mounted control paddles when required, when
overtaking, for example.
This gearbox provides you with the benefit of
additional functions:
- hill start assist,
- the creep function (movement of the
vehicle on releasing the brake pedal) in
automated mode or reverse.
R. Reverse.
F With your foot on the brake, lift the lever
and push forwards.
N. Neutral.
F With your foot on the brake, select this
position to start.
A. Automated mode.
F Move the lever backwards to select this
mode.
M. Manual mode with sequential gear
changing.
F Move the lever to the left to select this
mode, then use the steering mounted
control paddles to change gear:
Gear lever
+. Change up paddle to the right of the
steering wheel.
F Press the back of the "+" steering mounted
paddle to change up a gear.
-. Change down paddle to the left of the
steering wheel.
F Press the back of the "-" steering mounted
paddle to change down a gear.
Steering mounted control
paddles
The steering mounted paddles cannot
be used to select neutral or to engage
or disengage reverse gear.