Handbook
On-line handbook Select one of the following means of access to view your handbook on-line... This personal space offers advice and other useful information for the care and maintenance of your vehicle. Scan this code for direct access to your handbook. Find your handbook on the Peugeot website, under "MyPeugeot". If the "MyPeugeot" function is not available on the Peugeot public website for your country, you can find your handbook at the following address: http://public.servicebox.peugeot.
Welcome Thank you for choosing a 508, a symbol of confidence, passion and inspiration This handbook has been designed to help to make the most of your 508 in all circumstances and in complete safety. Take the time to read through it so as to familiarise yourself with your vehicle. This handbook covers all of the variations in equipment available across the whole 508 range.
Contents Overview Eco-driving . .
Contents Child safety Child seats Deactivating the passenger's front airbag ISOFIX child seats Child lock Practical information 155 158 164 170 Safety Direction indicators Emergency or assistance call Horn Warning triangle Tyre under-inflation detection ESC system Seat belts Airbags Temporary puncture repair kit Changing a wheel Snow chains Changing a bulb Changing a fuse 12 V battery Removing - refitting the battery Energy economy mode Changing a wiper blade Towing the vehicle Towing a trailer Fitting
Overview Exterior Panoramic sunroof (SW) Electronic key: Keyless Entry and Starting The glass roof makes the passenger compartment brighter and is fitted with an electric blind. This system allows you to unlock, lock and start your vehicle while keeping the key on your person and in the recognition zone around the vehicle. 62 44, 101 Stop & Start AdBlue® additive (BlueHDi Diesel engines) This system puts the engine temporarily into standby during stops in the traffic (red lights, traffic jams, etc.
Overview . Exterior Front and rear parking sensors Motorised tailgate (SW) This system provides a warning when manoeuvring forwards and backwards by detecting obstacles located in front of or behind the vehicle. This system provides motorised opening and closing of the tailgate, by pressing a button. 57 134 Temporary puncture repair kit This kit is a complete system consisting of a compressor and a sealant cartridge, to allow the temporary repair of a tyre.
Overview Interior Audio and communication systems Head-up display These systems benefit from the latest technology: MP3 compatible audio systems, USB player, Bluetooth hands-free system, satellite navigation system with colour screen, auxiliary inputs, Hi-Fi audio system, ... Touch screen This system projects speed and cruise control/ speed limiter information onto a smoked strip in the driver's field of vision, so that they do not need to take their eyes off the road.
Overview . Switch panels* Deactivation of the DSC/ASR system. 178 Electric child lock. 170 Programmable heating warning lamp. Lighting of the indicator lamp indicates the state of the corresponding function. Massage. 70 Adaptive lighting. 144 Alarm. 52 Blind spot monitoring. 126 98 Electric parking brake. 103 Starting/stopping using the electronic key. 101 Opening the boot. 44, 56, 57 Deactivation of parking sensors. 135 Deactivation of Stop & Start. 122 Head-up display (on/off, settings).
Overview Instruments and controls 1. 2. 3. 4. 5. Cruise control / speed limiter controls. Headlamp height adjustment. Lighting and direction indicator stalk Instrument panel. Driver's airbag. Horn. 6. Gear lever. 7. 12 V accessory socket USB port / auxiliary socket. 8. Bonnet release lever. 8 9. Fusebox. 10. Front door window demisting/defrosting vent. 11. Windscreen demisting/defrosting vent. 12. Steering lock and starting with the key. 13. Starting using the electronic key. 14.
Overview .
Eco-driving Eco-driving Eco-driving is a range of everyday practices that allow the motorist to optimise their fuel consumption and CO2 emissions. Optimise the use of your gearbox Control the use of your electrical equipment With a manual gearbox, move off gently and change up without waiting. During acceleration change up early. Before moving off, if the passenger compartment is too warm, ventilate it by opening the windows and air vents before using the air conditioning.
Eco-driving Limit the causes of excess consumption Observe the recommendations on maintenance Spread loads throughout the vehicle; place the heaviest items in the bottom of the boot, as close as possible to the rear seats. Limit the loads carried in the vehicle and reduce wind resistance (roof bars, roof rack, bicycle carrier, trailer...). Use a roof box in preference. Remove roof bars and roof racks after use.
Monitoring Instrument panel Dials and screens 1. Rev counter (x 1 000 tr/min or rpm), graduation according to engine (petrol or Diesel). 2. Engine oil temperature gauge. 3. Fuel gauge. 4. Engine coolant temperature gauge. 5. Speedometer (mph or km/h). 6. Cruise control or speed limiter settings. 7. Gear shift indicator for a manual gearbox or gear lever position and gear for an electronic or automatic gearbox. 12 Control buttons 8. Display zone: alert messages or state of functions, trip computer. 9.
Monitoring Instrument panel screen Main menu* Vehicle parameters 1 Screen settings 1 Driving position setting 2 3 3 3 3 Choice of language 2 Unlocking boot only Choice of units 2 Driving assistance 2 Choice of color schemes 2 Access to the vehicle 2 With the vehicle stationary, use the left hand thumb wheel to move through the menus, so as to configure the vehicle settings (driving and comfort systems, ...).
Monitoring Indicator and warning lamps Associated warnings Visual indicators informing the driver that a system is in operation, switched off or has a fault. The switching on of certain warning lamps may be accompanied by an audible signal and a message in the instrument panel screen. The warning lamps may come on continuously (fixed) or flash.
Monitoring Operation indicator lamps If one of the following indicator lamps comes on in the instrument panel and/or instrument panel screen, this confirms that the corresponding system has come into operation. Warning / indicator lamp State Cause Left-hand direction indicator flashing with buzzer. The lighting stalk is pushed down. Right-hand direction indicator flashing with buzzer. The lighting stalk is pushed up. Sidelamps fixed. The lighting stalk is in the "Sidelamps" position.
Monitoring Warning / indicator lamp 16 State Cause Action / Observations Diesel engine pre-heating fixed. The START/STOP switch has been pressed (ignition on). Wait until the warning lamp goes off before starting. Once it goes off, starting is immediate, on condition that the brake pedal remains pressed with an automatic or electronic gearbox, or the clutch pedal is pressed fully down with a manual gearbox.
Monitoring Warning / indicator lamp State Cause Action / Observations Automatic wiping fixed. The wiper control is pushed downwards. Automatic front wiping is activated. To deactivate automatic wiping, operate the control stalk downwards or put the stalk into another position. Passenger's airbag system fixed in the seat belt and passenger's front airbag warning lamps display. The control switch, located in the glove box, has been placed in the "ON" position.
Monitoring Deactivation indicator lamps If one of the following indicator lamps comes on, this confirms that the corresponding system has been switched off intentionally. This is may be accompanied by an audible signal and a message in the instrument panel screen. Warning / indicator lamp Passenger's airbag system 18 State Cause Action / Observations fixed in the instrument panel and/or seat belt and front passenger's airbag warning lamps display.
Monitoring Warning lamps When the engine is running or the vehicle is being driven, illumination of one of the following warning lamps indicates a fault which requires action on the part of the driver. Any fault resulting in the illumination of a warning lamp must be investigated further by reading the associated message in the instrument panel screen. If you encounter any problems, contact a PEUGEOT dealer or a qualified workshop.
Monitoring Warning / indicator lamp + 20 State Cause Action / Observations Electric parking brake flashing. The electric parking brake is not applied automatically. The application/release is faulty. You must stop as soon as it is safe to do so. Park on flat level ground, engage a gear (or place the lever in position P for an automatic gearbox), switch off the ignition and contact a PEUGEOT dealer or a qualified workshop. Electric parking brake fault fixed.
Monitoring Warning / indicator lamp State Cause Action / Observations Anti-lock Braking System (ABS) fixed. The anti-lock braking system has a fault. The vehicle retains conventional braking. Drive carefully at reduced speed and contact a PEUGEOT dealer or a qualified workshop without delay. Dynamic stability control (DSC/ASR) flashing. The DSC/ASR regulation is operating.
Monitoring Warning or indicator lamp in the instrument panel AdBlue ® additive (BlueHDi Diesel) + 22 State Cause Action / Observations fixed, on switching on the ignition, accompanied by an audible signal and a message indicating the remaining driving range. The remaining driving range is between 350 miles (600 km) and 1500 miles (2400 km).
Monitoring Warning or indicator lamp in the instrument panel + + SCR emissions control system (BlueHDi Diesel) State Cause Action / Observations fixed, on switching on the ignition, associated with the SERVICE and engine diagnostic warning lamps, accompanied by an audible signal and a message indicating an emissions control fault. A fault with the SCR emissions control system has been detected. This alert disappears once the exhaust emissions return to normal levels.
Monitoring Warning or indicator lamp in the instrument panel State Cause Action / Observations Engine oil pressure fixed. There is a fault with the engine lubrication system. You must stop as soon it is safe to do so. Park, switch off the ignition and contact a PEUGEOT dealer or a qualified workshop. Battery charge fixed. The battery charging circuit has a fault (dirty or loose terminals, slack or cut alternator belt, ...). The warning lamp should go off when the engine is started.
Monitoring Warning / indicator lamp + State Cause Action / Observations Seat belt(s) not fastened / unfastened fixed then flashing accompanied by an increasing audible signal. A seat belt has not been fastened or has been unfastened. Pull the strap then insert the tongue in the buckle. Airbags on temporarily. This lamp comes on for a few seconds when you turn on the ignition, then goes off. This lamp should go off when the engine is started.
Monitoring Coolant temperature gauge Engine oil temperature gauge After driving for a few minutes, the temperature and pressure in the cooling system increase. To top up the level: F wait for the engine to cool, F unscrew the cap by two turns to allow the pressure to drop, F when the pressure has dropped, remove the cap, F top up the level to the "MAX" mark.
Monitoring CHECK (vehicle autotest) Automatic CHECK Lighting dimmer control 1 Manual CHECK With the key in the ignition on position, all of the warning lamps for the functions tested are displayed. They are switched off after a few seconds. At the same time, an automatic CHECK (vehicle autotest) is carried out. If no "major" fault is found, you can start your vehicle. In the presence of a fault A "minor" fault has been detected: the warning lamp(s) are displayed then go off.
Monitoring Service indicator This is a check against the planned servicing intervals in the manufacturer's servicing schedule. It is calculated from the last service indicator reset according to the number of miles travelled and the time elapsed since the last service. For BlueHDi Diesel versions only (depending on country of sale), the level of deterioration of the engine oil is also taken into account.
Monitoring Service overdue For 5 seconds after the ignition is switched on, the spanner flashes to indicate that the service must be carried out as soon as possible. Example: the service is overdue by 186 miles (300 km). For 5 seconds after the ignition is switched on, the screen indicates: 5 seconds after the ignition is switched on, the distance recorder resumes its normal operation. The spanner remains on.
Monitoring Engine oil level indicator* Mileage recorder On versions fitted with an electric oil level indicator, the state of the engine oil level is displayed in the instrument panel for a few seconds, after the servicing information. The level read will only be correct if the vehicle is on level ground and the engine has been off for more than 30 minutes. Oil level indicator fault This is signalled by the display of the message "Oil level measurement invalid" in the instrument panel.
Monitoring Trip computer System which provides current information concerning the trip (range, fuel consumption…). 1 Information display - The current information tab with: ● the range, ● the current fuel consumption, ● the Stop & Start time counter. Instrument panel screen F Press the steering mounted control to display the various trip computer tabs in succession. - The trip "1" tab with: ● the average speed, for the first trip, ● the average fuel consumption, ● the distance travelled.
Monitoring Trip reset F When the trip required is displayed, press the control for more than two seconds or make a long press on the left hand thumb wheel of the steering mounted controls. Trips "1" and "2" are independent but their use is identical. For example, trip "1" can be used for daily figures, and trip "2" for monthly figures.
Monitoring 1 Information display The information is accessible in the "Driving" menu. Trip reset The current instantaneous fuel consumption tab with: the range, the current fuel consumption, the Stop & Start time counter. - Permanent display: F Select the "Driving" menu. The trip computer information is displayed in the primary page of the menu. F Press one of the buttons to display the desired tab.
Monitoring Trip computer, a few definitions… Range Current fuel consumption (miles or km) This indicates the distance which can still be travelled with the fuel remaining in the tank in relation to the average fuel consumption over the last few miles (kilometres) travelled. (mpg or l/100 km or km/l) This is the average fuel consumption during the last few seconds.
Monitoring Touch screen It gives access to: menus for adjusting settings for vehicle functions and systems, audio and display configuration menus, audio system and telephone controls and the display of associated information. And, depending on equipment, it allows: the display of alert messages and the visual parking sensors information, access to the controls for the navigation system and Internet services, and the display of associated information.
Monitoring Principles Press the virtual buttons in the touch screen. Each menu is displayed over one or two pages (primary page and secondary page). Use this button to go to the secondary page. Use this button to return to the primary page. After a few moments with no action on the secondary page, the primary page is displayed automatically. Use this button for access to additional information and to the settings for certain functions. Use this button to confirm. Use this button to quit. Navigation.
Monitoring "Settings" menu 1 The functions available through this menu are detailed in the table below. Button Corresponding function Comments Audio settings Adjustment of volume, balance... Color schemes Choice of color scheme. Turn off screen Turn off the display in the the touch screen (black screen). Pressing the black screen restores the display. System Settings Choice of units: temperature (°Celsius or °Fahrenheit) distance and fuel consumption (l/100 km, mpg or km/l).
Monitoring "Driving" menu The systems with settings that can be adjusted (depending on version) are detailed in the table below. Button 38 Corresponding function Comments Parking sensors Deactivation of the function. Blind spot sensors Activation of the function.
Monitoring Setting the date and time 1 Audio system without touch screen Using the arrows, select "Personalisationconfiguration" and confirm. Select the setting to be modified. Confirm by pressing OK, then make the change and confirm again to save the modification. Adjust the settings one by one, confirming by pressing the OK button. Next select the "OK" tab on the screen then confirm to exit from the "Date and time adjustment" menu. Press MENU.
Monitoring Audio system with touch screen F Select the "Settings" menu. F In the secondary page, press on "Time/Date". 40 F Select "Adjust time" or "Adjust date" and modify the settings using the numeric keypad, then confirm. F Press "Confirm" to quit.
Access Remote control key System which permits central unlocking or locking of the vehicle using the lock barrel or from a distance. It is also used to locate and start the vehicle, as well as providing protection against theft. Unfolding the key Folding the key F First press this button to unfold the key. F First press this button to fold the key. If you do not press the button when folding the key, there is a risk of damage to the mechanism.
Access "Keyless Entry and Starting" system Unlocking the vehicle Complete unlocking System that allows the opening, closing and starting of the vehicle while keeping the electronic key on your person. It can also be used as a remote control. Using the electronic key Using the key F Turn the key to the front of the vehicle to unlock the vehicle. Using the remote control F Press the open padlock to unlock the vehicle.
Access Accumulations (water, dust, grime, salt...) on the inner surface if the door handle may affect detection. If cleaning the inner surface of the door handle using a cloth does not restore detection, contact a PEUGEOT dealer or a qualified workshop. A sudden splash of water (stream of water, high pressure jet washer, …) may be identified by the system as the desire to open the vehicle. Selective unlocking This is set via the instrument panel screen configuration menu.
Access Unlocking the boot Using the remote control F Press this button to unlock the vehicle and open the boot. Boot only function activated This is set in the instrument panel configuration menu. This function is deactivated by default. F use of the remote control or the electronic key then unlocks and/or opens only the boot. Don't forget to lock your boot afterwards.
Access 2 Locking the vehicle Normal locking Maintaining the locking action (remote control or manual key) automatically closes the windows and sunroof. Contact a PEUGEOT for deactivation of this function. Using the key F Turn the key towards the rear of the vehicle to lock the vehicle completely. Using the remote control F Press the closed padlock to lock the vehicle completely.
Access If one of the doors or the boot is still open or if the key for Keyless Entry and Starting system has been left inside the vehicle or if the ignition is on, the central locking does not take place. When the vehicle is locked, if it is unlocked inadvertently, it will lock itself again automatically after about thirty seconds unless a door is opened. If the alarm was previously activated, it will not be reactivated automatically.
Access Deadlocking Using the remote control Deadlocking renders the exterior and interior door controls inoperative. It also deactivates the manual central control button. Therefore, never leave anyone inside the vehicle when it is deadlocked. F Press the closed padlock to lock the vehicle completely or press the closed padlock for more than two seconds to close the windows automatically in addition to locking.
Access Locking/ unlocking from the inside Locating your vehicle Automatic central locking of the doors The doors can lock automatically while driving (speed above 6 mph (10 km/h)). To activate or deactivate this function, press and hold the button until a message appears in the screen. F Press the button. This allows the doors and the boot to be locked or unlocked. If the vehicle is deadlocked or locked with the remote control or the door handles, the button is not active.
Access Emergency procedure Emergency unlocking/ locking using the electronic key The integral key is used to lock and unlock the vehicle when the electronic key cannot operate: cell battery flat, vehicle battery discharged or disconnected, ... vehicle located in an area with strong electromagnetic emissions. F Pull on button 1, to extract the integral key 2. F Unlock or lock the vehicle using the key.
Access Reinitialisation with the electronic key Changing the battery of the key Changing the battery of the electronic key Battery ref.: CR2032 / 3 volts. This replacement battery is available from a PEUGEOT dealer or a qualified workshop. A message appears in the instrument panel screen when replacement of the battery is needed. F Unclip the cover using a small screwdriver at the cutout. F Lift off the cover. F Remove the flat battery from its location.
Access Lost keys, remote control, electronic key Visit a PEUGEOT dealer with the vehicle's V5 registration document and your personal identification documents. The PEUGEOT dealer will be able to retrieve the key code and the transponder code required to order a replacement. Remote control 2 The high frequency remote control is a sensitive system; do not operate it while it is in your pocket as there is a possibility that it may unlock the vehicle, without you being aware of it.
Access Alarm - Tilt The system checks for any change in the attitude of the vehicle. The alarm is triggered if the vehicle is lifted, moved or knocked. Self-protection function System which protects and provides a deterrent against theft and break-ins. It provides the following types of monitoring: - Exterior perimeter The system checks for opening of the vehicle. The alarm is triggered if anyone tries to open a door, the boot or the bonnet...
Access Locking the vehicle with exterior perimeter monitoring only Deactivate the interior volumetric and anti-lift monitoring to avoid unwanted triggering of the alarm in certain cases such as: leaving a window partially open, washing your vehicle, changing a wheel, having your vehicle towed, transportation by sea. - Deactivation of the interior volumetric and anti-tilt monitoring F Switch of the ignition and within ten seconds, press this button until the indicator lamp is on continuously.
Access Electric windows Safety anti-pinch Manual operation To open or close the window, press or pull the switch gently. The window stops as soon as the switch is released. 1. 2. 3. 4. 5. 54 Left hand front electric window switch. Right hand front electric window switch. Right hand rear electric window switch. Left hand rear electric window switch. Deactivating the rear electric window switches, locking the rear doors (child lock).
Access 2 Reinitialisation of the electric windows Following reconnection of the battery, the safety anti-pinch function must be reinitialised. The safety anti-pinch function is not active during these operations: lower the window completely, then raise it, it will rise in steps of a few centimetres each time the switch is pressed. Repeat the operation until the window closes completely, continue to press the switch for at least one second after reaching this position, window closed.
Access Boot Opening From the inside Hold this button down until unlocking of the boot is heard. Saloon SW F After unlocking the vehicle completely using the remote control or the key, press this button. F After unlocking the vehicle completely using the remote control or the key, press at the top (on lever A), and raise the tailgate. Closing F Lower the tailgate using the interior grab handle.
Access Motorised tailgate (SW) 2 Opening From the inside Vehicle locked/deadlocked F Press this button A on the remote control. Vehicle unlocked F Press button A on the remote control, or press the push button B on the tailgate. F Press this button to unlock and open the tailgate. Check that here is no obstacle in the way when opening the tailgate by remote control.
Access Closing F Press this button C to close the tailgate electrically. Do not hinder closing of the tailgate: any obstacle to closing causes the tailgate to stop and rise a few centimetres automatically. To close the tailgate manually: move the tailgate slightly up then down to disengage it from its drive then lower it until closed. To avoid the risk of injury, ensure that no one is close to the rear of the vehicle when opening or closing the tailgate.
Access Emergency release (Saloon and SW) System for mechanical unlocking of the boot in the event of a battery or central locking fault. 2 Unlocking F Fold back the rear seats to gain access to the lock from inside the boot. F Insert a small screwdriver into hole A of the lock, then move the lever to the left to unlock the boot.
Access Sunroof Your vehicle is fitted with an opening sunroof which increases the light and visibility in the passenger compartment. Opening Closing Blind Turn the dial to the left to slide the sunroof (several possible opening settings). Return the dial to the initial position. If the position of the glass panel does not agree with the position indicated by the dial, press the ring of the dial to open the sunroof to this position. The blind improves thermal and acoustic comfort.
Access Safety anti-pinch Reinitialising the system Am anti-pinch system stops the closing of the roof, whether sliding or from the raised at the rear position. If the sunroof encounters an obstacle it partially opens again. If the sunroof fails to close at a second attempt, it may be necessary to force the closing of the sunroof using the reinitialisation procedure.
Access Panoramic sunroof (SW) Opening Turn the dial to the left (several possible opening settings). Closing Return the dial to the initial position. If the position of the blind does not agree with the position indicated by the dial, press the dial to open the blind to this position. Your vehicle is fitted with a tinted glass panoramic sunroof which increases the light and visibility in the passenger compartment.
Access Fuel tank Capacity of the tank: approximately 72 litres (or 55 litres according to version). Opening Refuelling F Introduce the nozzle and push it in fully (pushing on the the metal non-return valve A). F Fill the tank. Do not continue past the third cut-off of the nozzle, as this may cause malfunctions. F Refit the filler cap turning it a 1/4 turn to the right. F Push the filler flap to close it. Press the switch. This control remains active for a few minutes after switching off the ignition.
Access Diesel misfuel prevention Low fuel level hen the low fuel level in the W tank is reached, this warning lamp comes on in the instrument panel, accompanied by an audible warning and a message in the instrument panel screen. When it first comes on, around 7 litres of fuel remain in the tank. You must refuel as soon as possible to avoid running out. Mechanical device which prevents filling the tank of a Diesel vehicle with petrol.
Access Fuel used for petrol engines Fuel used for Diesel engines The petrol engines are compatible with E10 type petrol biofuels (containing 10 % ethanol), conforming to European standards EN 228 and EN 15376. E85 type fuels (containing up to 85 % ethanol) are reserved exclusively for vehicles marketed for the use of this type of fuel (BioFlex vehicles). The quality of the ethanol must comply with European standard EN 15293.
Comfort Front seats Manual adjustments 1. Adjustments to the height and angle of the head restraint To raise it, pull upwards. To lower it, hold the button in and press on the head restraint (pushing to go past the stiff point of the button). 2. Adjustment of the backrest angle Operate the control lever and adjust the position of the backrest to the front or to the rear. 3. Adjustment of the seat height Raise or lower the control lever the number of times required to obtain the desired position. 4.
Comfort Electric adjustments 1. Adjustment of the seat cushion angle and height, and forwards-backwards adjustment F Raise or lower the front of the control to adjust the seat cushion angle. F Raise or lower the rear of the control to raise or lower the seat. F Simultaneously raise or lower the front and rear of the control in order to raise or lower the entire seat. 2. Adjustment of the backrest angle Move the control forwards or backwards to adjust the backrest angle. 3.
Comfort Storing driving positions Welcome function Storing a position using buttons M / 1 / 2 System which stores the electrical settings of the driver's seat and door mirrors as well as the head-up display settings. It enables you to store up to two positions using the buttons on the side of the driver's seat. F Switch on the ignition. F Adjust your seat, the door mirrors and the head-up display. F Press button M, then press button 1 or 2 within four seconds.
Comfort Heated seats control 3 With the engine running, the front seats can be heated separately. Head restraint height and angle adjustment F To lower the head restraint, press the lug A and, going beyond the stiff point, guide the head restraint downwards, then release the button at the desired position. F To raise the head restraint, guide it upwards to the desired position. F To remove the head restraint, press the two lugs B and pull the head restraint upwards.
Comfort Massage function Activation F Press this button. This function provides the driver with a back massage. It only operates when the engine is running as well as in STOP mode of the Stop & Start system. The warning lamp comes on and the massage function is activated for a period of 1 hour. During this time, massage is performed in cycles of 6 minutes (4 minutes of massage followed by 2 minutes break). In total, the system will perform 10 cycles.
Comfort Rear seats Bench seat the left-hand (1/3) or right-hand (2/3) section of which can be folded to adapt the boot load space. Outer rear seat head restraints These have a high position (comfort and safety), a low position (rear visibility) and can also be removed. Folding the seat from the boot (SW) 3 Each section of the bench seat (1/3 or 2/3) has its own control to release the seat back and its seat cushion from the boot.
Comfort Folding the seat from the rear Returning the seat back to its original position When returning the rear seat back to its original position, take care not to trap the seat belts and ensure that their buckles are positioned correctly. Check that no object, either on or underneath the seat, could hinder its movement.
Comfort Mirrors Door mirrors Folding - Automatic: lock the vehicle using the remote control or the key. Manual: with the ignition on, pull control A rearwards. 3 If the mirrors are folded using control A, they will not unfold when the vehicle is unlocked. Pull again on control A. Adjustment Each fitted with an adjustable mirror glass providing the lateral rearward vision necessary for overtaking or parking. They can also be folded for parking in confined spaces.
Comfort Automatic tilting in reverse gear Switching on System which provides a view of the ground during parking manoeuvres in reverse gear. F With the engine running, engage reverse gear. F Move control A to the right or to the left to select the corresponding mirror. The glass of the mirror selected tilts downwards, in accordance with its programming. Switching off Programming F With the engine running, engage reverse gear. F Select and adjust the left-hand and righthand mirrors in succession.
Comfort Steering wheel adjustment Rear view mirror Adjustable mirror providing a central rearward view. Equipped with an anti-dazzle system, which darkens the mirror glass and reduces the nuisance to the driver caused by the sun, headlamps from other vehicles... 3 Automatic day/night model Manual day/night model By means of a sensor, which measures the light from the rear of the vehicle, this system automatically and progressively changes between the day and night uses.
Comfort Interior fittings 1. Cooled glove box It has a ventilation nozzle (delivering cool air) which can be closed* using a thumb wheel, as well as a USB port* for the 3G key. 2. Storage 3. Retractable cup holder Press the cover to open the cup holder 4. Removable ashtray Press the lid to open the ashtray. To empty it, pull it out by pulling it upwards. 5. Controls* Massage, Adaptive lighting, Blind spot monitoring, Alarm, PEUGEOT Connect SOS, PEUGEOT Connect Assistance. 6. Storage with sliding cover 7.
Comfort Mats Rear armrest Removable carpet protection. Fitting Refitting 3 To refit the mat on the driver's side: F position the mat correctly, F refit the fixings by pressing, F check that the mat is secured correctly. When fitting the mat for the first time, on the driver's side use only the fixings provided in the wallet attached. The other mats are simply placed on the carpet.
Comfort Ski flap PEUGEOT Connect USB Facility for storing and transporting long objects. Opening F F F F Lower the armrest. Press the flap opening control. Lower the flap. Load the objects from inside the boot. Do not leave the flap open when not transporting long objects. 78 This connection box comprises a JACK auxiliary socket and a USB port. It permits the connection of portable device, such as a digital audio player of the iPod ® type or a USB memory stick.
Comfort Boot fittings (Saloon) 1. 2. 3. 4. 5. 6. 7. Retractable hooks Storage pockets With towing eye, a wheel chock and a temporary puncture repair kit (according to destination country and equipment).
Comfort Boot fittings (SW) 1. 2. 3. 4. 5. 6. 7. 8. 80 Boot lamps Rear seats folding controls Retractable hooks 12 V accessory socket (120 W max) Storage pockets With towing eye, a wheel chock and a temporary puncture repair kit (according to destination country and equipment). Stowing rings Load space cover (see following page) Boot floor For access to the storage compartments or the spare wheel (according to destination country), position the floor vertically in its guide.
Comfort Luggage cover (SW) To reel in To remove To install F Gently push on the (PRESS) handle, the luggage cover reels in automatically. The moving part A can be folded against the rear bench seat backrest. F Compress the control 1 and lift the luggage cover on the right then on the left to remove it. F Position the left-hand end of the luggage cover roller in its location B behind the rear bench seat. F Compress the roller control 1 and put the roller in place in its location C on the right.
Comfort High load retaining net (SW) Hooked onto the special upper and lower fixings, this allows the use of the entire loading volume up to the roof: behind the front seats (row 1) when the rear seats are folded. behind the rear seats (row 2). Never reposition the rear seats if the net's roller is attached to the backs of the folded seats. Row 1 F position the net's roller above the two rails (located on the back of the folded rear seats), F the two grooves A must be placed above the two rails B.
Comfort 3 Row 2 F reel in then remove the load space cover, F position the left hand end of roller 2 in the load space cover support, F position the right hand end of roller 2 in the load space cover support, then lock the position (red indicator), F from the rear bench seat, unroll the high load retaining net by pushing to disengage the retaining hooks, F position one of the ends of the net's metal bar in the corresponding upper fixing 3, F pull on the net's metal bar to position the other end in the ot
Comfort Heating and Ventilation System which creates and maintains good conditions of comfort and visibility in the vehicle's passenger compartment. Air intake The air circulating in the passenger compartment is filtered and originates either from the outside via the grille located at the base of the windscreen or from the inside in air recirculation mode.
Comfort Recommended interior settings Heating or Manual air conditioning I require... Air distribution Air flow Air recirculation/Intake of exterior air Temperature Manual AC 3 HOT COLD DEMISTING DEFROSTING Digital air conditioning: use fully automatic operation in preference, by pressing the "AUTO" button.
Comfort Recommendations for ventilation and air conditioning In order for these systems to be fully effective, follow the operation and maintenance guidelines below: F If the interior temperature remains very high after the vehicle has been parked in the sun for a considerable time, first ventilate the passenger compartment for a few minutes. Place the air flow control at a sufficient level to provide an adequate renewal of air in the passenger compartment.
Comfort Manual air conditioning The air conditioning can only operate with the engine running. 3. Air distribution adjustment F Press the corresponding button for: Windscreen and side windows. 3 Central and side vents. 1. Temperature adjustment F Turn the dial from left (cold) to right (hot) to adjust the temperature to your requirements. 2. Air flow adjustment F Press the "full fan" button to increase the air flow. According to the value selected, the associated line of LEDs fills progressively.
Comfort 4. Air intake / Air recirculation The intake of exterior air prevents the formation of mist on the windscreen and side windows. The recirculation of interior air isolates the passenger compartment from exterior odours and smoke. Return to exterior air intake as soon as possible to prevent deterioration of the the air quality and the formation of mist. 5. Air conditioning On / Off The air conditioning is designed to operate effectively in all seasons, with the windows closed.
Comfort Dual-zone digital air conditioning The air conditioning can only operate with the engine running. Automatic operation 2 - 3. D river-passenger side adjustment The driver and front passenger can each adjust the temperature to their requirements. The value indicated on the display corresponds to a level of comfort and not to a temperature in degrees Celsius or Fahrenheit. F Turn control 2 or 3 to the left (blue) or to the right (red) respectively to decrease or increase this value. 1.
Comfort 5. Mono-zone / Dual-zone On entering the vehicle, if the interior temperature is much colder or warmer than the comfort value, there is no need to change the value displayed in order to obtain the comfort required. The system corrects the difference in temperature automatically and as quickly as possible. 4. A utomatic visibility programme See "Front demisting-defrosting". With Stop & Start, when demisting has been activated, the STOP mode is not available.
Comfort 8. Air distribution adjustment F Press the corresponding button for: 9. Air flow adjustment F Press this "full fan" button to increase the air flow. Windscreen and side windows. The air flow symbol, the fan, fills progressively according to the value requested. Centre and side vents. F Press "empty fan" button to reduce the air flow. Footwells. 10. Air intake / Air recirculation F Press this button for recirculation of the interior air. The indicator lamp on the button comes on.
Comfort Quad-zone digital air conditioning The air conditioning can only operate with the engine running. Automatic operation 3 - 4. Driver-passenger side adjustment The driver and front passenger can each adjust the temperature to their requirements. The value indicated on the display corresponds to a level of comfort and not to a temperature in degrees Celsius or Fahrenheit. 1.
Comfort On entering the vehicle, if the interior temperature is much colder or warmer than the comfort value, there is no need to change the value displayed in order to obtain the comfort required. The system corrects the difference in temperature automatically and as quickly as possible. 6. Mono-zone / Quad-zone Press this button to apply the driver's comfort setting value to the front and rear passengers (mono-zone). The indicator lamp on the button comes on. 7. Air conditioning On / Off 5.
Comfort 8. Air distribution adjustment F Press the corresponding button for: 9. Air flow adjustment F Press this "full fan" button to increase the air flow. Windscreen and side windows. The symbol for air flow, the fan, fills progressively according to the value requested. Centre and side vents. Footwells. To suit your requirements, you can combine two distribution buttons or select the three distribution modes simultaneously. 94 F Press "empty fan" button to reduce the air flow.
Comfort Adjusting the rear passenger comfort level The rear air conditioning controls only operate if, from the front: the REAR button is activated, the automatic visibility programme is not activated. 1. Automatic comfort programme F Press the "AUTO" button. The lamp in the button comes on. 2. Air distribution adjustment 3. Temperature adjustment, left and right Press the corresponding button successively for: The left and rear passengers can each adjust their temperature setting independently.
Comfort 4. Air flow adjustment F Press this "full fan" button to increase the air flow. The air flow symbol, the fan, fills progressively as the fan speed increases. F Press this "empty fan" button to reduce the air flow. 96 Deactivating the system F Press the "empty fan" air flow button until the fan disappears and "- -" appears. This action stops all of the functions of the air conditioning system. Thermal comfort is no longer controlled.
Comfort Front demist defrost With manual air conditioning F Select this programme to demist or defrost the windscreen and side windows as quickly as possible. The system automatically manages the air conditioning, air flow and air intake, and provides optimum distribution towards the windscreen and side windows. Adjust the temperature control to quickly demist /defrost the windows.
Comfort Programmable Heating / Ventilation Programming F In the "Main menu", select "Pre-heating / Pre-ventilation". Programmable heating mode This is an additional and separate system which heats the engine hot water circuit to improve defrosting and to preheat the passenger compartment. This indicator lamp comes on only when if the system is programmed in programmable heating mode. With the ignition on, press the left hand steering mounted thumb wheel for access to the main menu.
Comfort F Select: - immediate to start the heating or ventilation (once confirmed "OK"), - the first clock to programme/store your departure time, - the second clock to programme/store a second departure time. Depending on the departure time chosen, the system calculates automatically the optimum time to start operating. The immediate or programmed activation of Ventilation mode depends on the temperatures inside and outside the vehicle.
Driving Starting-switching off the engine With a manual gearbox, put the gear lever in neutral. With an electronic gearbox, put the gear lever in N. With an automatic gearbox, put the gear lever in P or N. To ensure the correct operation and durability of the engine and gearbox, when the ambient temperature is below -23°C, it is necessary to leave the engine running at idle for four minutes. Starting using the key Switching off using the key F Immobilise the vehicle.
Driving Starting using the electronic key Switching off using the electronic key If one of the starting conditions is not met, a reminder message appears in the instrument panel screen. In some circumstances, it is necessary to turn the steering wheel slightly while pressing the "START/STOP" button to assist unlocking of the steering; a message warns you when this is needed.
Driving Anti-theft protection Electronic engine immobiliser The keys contain an electronic chip which has a secret code. When the ignition is switched on, this code must be recognised in order for starting to be possible. This electronic engine immobiliser locks the engine management system a few minutes after the ignition is switched off and prevents starting of the engine by anyone who does not have the key.
Driving Electric parking brake Manual application Programming the mode Depending on the country of sale of the vehicle, the automatic application when the engine is switched off and the automatic release when you press the accelerator can be deactivated. Activation / deactivation is done via the menu in the instrument panel screen.
Driving Manual release Automatic application, engine off Maximum application With the ignition on or the engine running, to release the parking brake, press the brake pedal, pull then release control lever A. The full release of the parking brake is confirmed by: - - the braking warning lamp and the P warning lamp in the control lever A going off, display of the message "Parking brake off".
Driving Automatic release The electric parking brake releases automatically and progressively when you press the accelerator: F Manual gearbox: press down fully on the clutch pedal, engage first gear or reverse, press on the accelerator pedal and move off. F Electronic gearbox: select position A, M or R then press on the accelerator pedal. F Automatic gearbox: select position D, M or R then press on the accelerator pedal.
Driving Emergency braking In the event of a failure of the main service brake, a continuous pull on the control lever A will stop the vehicle. The dynamic stability control provides stability during emergency braking. If the emergency braking malfunctions, the message "Parking brake control faulty" will be displayed. If a failure of the DSC system is signalled by the lighting of this warning lamp, then braking stability is not guaranteed.
Driving Operating faults If the electric parking brake fault warning lamp comes on together with one or more of the warning lamps presented in these tables, place the vehicle in a safe condition (on level ground, gear engaged) and contact a PEUGEOT dealer or a qualified workshop without delay. Situations Consequences Display of the message "Parking brake fault" and of the following warning lamps: - The automatic functions are deactivated. Hill start assist is not available.
Driving Situations and possibly flashing. Display of the message "Parking brake fault" and of the following warning lamps: Consequences To apply the electric parking brake: F immobilise the vehicle and switch off the ignition. F pull the control for at least 5 seconds or until application is complete. F switch on the ignition and check that the electric parking brake warning lamps come on. The application is slower than during normal operation.
Driving Manual parking brake 4 Application Release F With your foot on the brake pedal, pull the parking brake lever up to immobilise your vehicle. F With your foot on the brake pedal, pull the parking brake lever up gently, press the release button then lower the lever fully. When the vehicle is being driven, if this warning lamp and the STOP warning lamp come on, accompanied by an audible signal and a message, indicating that the parking brake is still on or has not been fully released.
Driving 6-speed manual gearbox Engaging 5th or 6th gear Engaging reverse gear F Move the lever fully to the right to engage 5th or 6th gear. Only engage reverse gear when the vehicle is stationary with the engine at idle. Failure to observe this procedure may cause permanent damage to the gearbox (engaging 3rd or 4th gear by mistake). As a safety precaution and to facilitate starting of the engine: always select neutral, press the clutch pedal.
Driving Gear shift indicator* System which reduces fuel consumption by advising the driver to change up. Operation The system intervenes only when driving economically. Depending on the driving situation and your vehicle's equipment, the system may advise you to skip one or more gears. You can follow this instruction without engaging the intermediate gears. The gear engagement recommendations must not be considered compulsory.
Driving "Porsche Tiptronic System" automatic gearbox Six speed automatic gearbox which offers a choice between the comfort of fully automatic operation, enhanced by sport and snow programmes, or manual gear changing. Four driving modes are offered: automatic operation for electronic management of the gears by the gearbox, sport programme for a more dynamic style of driving, snow programme to improve driving when traction is poor, manual operation for sequential changing of the gears by the driver.
Driving Displays in the instrument panel When you move the lever in the gate to select a position, the corresponding indicator comes on in the instrument panel. P. Park R. Reverse N. Neutral D. Drive (Automatic driving) S. Sport programme T. Snow programme 1 to 6. Gear engaged during manual operation -. Invalid value during manual operation Moving off F With your foot on the brake, select position P or N. F Start the engine.
Driving Automatic operation F Select position D for automatic changing of the six gears. The gearbox then operates in auto-adaptive mode, without any intervention on the part of the driver. It continuously selects the most suitable gear according to the style of driving, the profile of the road and the load in the vehicle. For maximum acceleration without touching the lever, press the accelerator pedal down fully (kick down).
Driving Operating fault Manual operation F Select position M for sequential changing of the six gears. F Pull the lever towards the + sign to change up a gear. F Push the lever towards the - sign to change down a gear. It is only possible to change from one gear to another if the vehicle speed and engine speed permit; otherwise, the gearbox will operate temporarily in automatic mode. D disappears and the gears engaged appear in succession in the instrument panel.
Driving Electronic gearbox Six-speed electronic gearbox which offers a choice between the comfort of fully automatic operation or the pleasure of manual gear changing. There are two driving modes: automated mode for automatic control of the gears by the gearbox, manual mode for sequential gear changing by the driver. In automated mode, it remains possible to change gear manually by using the steering mounted control paddles when required, when overtaking, for example.
Driving Displays in the instrument panel Moving off Automated mode F Select position N. F Press the brake pedal down fully. F Start the engine. F After starting the vehicle, select position A for enter automated mode. N appears in the instrument panel screen. Gear lever positions N. Neutral R. Reverse 1, 2, 3, 4, 5, 6. Gears in manual mode A. This comes on when the automatic mode is selected. It switches off on changing to manual mode.
Driving Manual gear changing Manual mode F When the vehicle has moved off, select position M to change to manual mode. F Pull the lever towards the + sign to change up a gear. F Push the lever towards the - sign to change down a gear. A disappears and M appears with the gears engaged successively, in the instrument panel screen. This selective gear change mode enables you to overtake, for example, while still remaining in automatic mode. F Operate the + or - steering mounted control paddle.
Driving Creep function (moving without pressing the accelerator) This function greatly facilitates manoeuvring of the vehicle at low speed (when parking, in a traffic jam…). With the engine at idle, parking brake released and position A, M or R selected, the vehicle moves as soon as you take your foot off the brake pedal (even without pressing the accelerator pedal). For your safety, this function is only activated if you press the brake pedal when changing to forward drive or reverse.
Driving Stop & Start The Stop & Start system puts the engine temporarily into standby - STOP mode - during stops in the traffic (red lights, traffic jams, or other...). The engine restarts automatically - START mode - as soon as you want to move off. The restart takes place instantly, quickly and silently. Perfect for urban use, the Stop & Start system reduces fuel consumption and exhaust emissions as well as the noise level when stationary.
Driving Deactivation Going into engine START mode The "ECO" indicator lamp goes off and the engine starts automatically: - - with a manual gearbox, when you fully depress the clutch pedal, with an electronic gearbox: ● gear selector in position A or M, when you release the brake pedal, ● or gear selector in position N and brake pedal released, when you put the gear selector in position A or M, ● or when you engage reverse gear.
Driving Reactivation Operating fault Press the "ECO OFF" switch again. The system is active again; this is confirmed by the indicator lamp in the switch going off and a message in the screen. Before doing anything under the bonnet, deactivate the Stop & Start system to avoid any risk of injury resulting from automatic operation of START mode. The system is reactivated automatically at every new start using the key.
Driving Hill start assist System which keeps your vehicle immobilised temporarily (approximately 2 seconds) when starting on a gradient, the time it takes to move your foot from the brake pedal to the accelerator pedal. This system only operates when: the vehicle is completely stationary, with your foot on the brake pedal, in particular conditions on a slope, with the driver’s door closed. The hill start assist system cannot be deactivated.
Driving Head-up display System which projects various information onto a smoked strip in the field of vision of the driver so that they do not have to take their eyes off the road. Buttons Displays during operation This system operates when the engine is running and the settings are stored when the ignition is switched off. 1. 2. 3. 4. Head-up display on. Head-up display off (long press). Brightness adjustment. Display height adjustment.
Driving Activation / Deactivation Brightness adjustment We recommend that adjustments are made using these buttons only when the vehicle is stationary. When stationary or while driving, no objects should be placed around the strip (or in its recess) so as to not impede deployment of the strip and its correct operation. F With the engine running, press button 1 to activate the system and deploy the strip. F Press and hold button 2 to deactivate the system and retract the strip.
Driving Blind spot sensors This driving assistance system warns the driver of the presence of another vehicle in the blind spot angle of their vehicle (areas masked from the driver's field of vision), as soon as this presents a potential danger. 126 A warning lamp appears in the door mirror on the side in question: immediately, when being overtaken, after a delay of about one second, when overtaking a vehicle slowly.
Driving Operation F On switching on the ignition, or engine running, press this button to activate the function; the warning lamp comes on. With audio system or for HYbrid4 version With touch screen Sensors fitted in the front and rear bumpers monitor the blind spots.
Driving Operating fault F To deactivate the system, press this button again; the warning lamp goes off. The state of the system remains in memory on switching off the ignition. The system is automatically deactivated when towing with a towbar approved by PEUGEOT. - - - 128 when overtaking (or being overtaken by) a very long vehicle (lorry, coach...
Driving Memorising speeds This memorising of speeds applies to both the speed limiter and the cruise control. Operation Selection F Select "Activation" to use the memorised speeds. F Select the speed M1 to M5 that you want to use. F Move the cursor to the desired value then press "CONFIG" to modify it. F Select "OK" and confirm to save the modifications. You can memorise up to 5 speeds in the system. By default, some speeds are already memorised.
Driving Speed limiter System which prevents the vehicle from exceeding the speed programmed by the driver. When the programmed speed limit is reached, pressing the accelerator pedal no longer has any effect unless it is pressed firmly, which allows you to temporarily exceed the programmed speed. To return to the programmed speed, simply slow down to a speed below the programmed speed by releasing the accelerator.
Driving Programming F Press 1, the speed limiter mode is activated but remains paused. You do not have to switch the speed limiter on in order to set the speed. F Set the speed value by pressing button 2 or 3 (e.g.: 55 mph (90 km/h)). You can then change the programmed speed using buttons 2 and 3: by + or - 1 mph (km/h) = short press, by + or - 5 mph (km/h) = long press, in steps of + or - 5 mph (km/h) = maintained press. F Switch the speed limiter on by pressing button 4.
Driving Cruise control System which automatically maintains the speed of the vehicle at the value programmed by the driver, without any action on the accelerator pedal. The cruise control is switched on manually: it requires a minimum vehicle speed of 25 mph (40 km/h) and the engaging: 4th gear or higher with a manual gearbox, 2nd gear or higher with an electronic or automatic gearbox, position A with an electronic gearbox or D with an automatic gearbox.
Driving Programming Operating fault F Press 1, the cruise control is activated but remains paused. F Set the programmed speed by accelerating to the required speed, then press button 2 or 3 (e.g.: 70 mph (110 km/h)). You can then change the programmed speed using buttons 2 and 3: by + or - 1 mph (km/h) = short press, by + or - 5 mph (km/h) = long press, in steps of + or - 5 mph (km/h) = maintained press.
Driving Parking sensors Rear parking sensors The system is switched on by engaging reverse gear. This is accompanied by an audible signal. The system is switched off when you come out of reverse gear. This system indicates the proximity of an obstacle (person, vehicle, tree, gate, etc.) which comes within the field of detection of sensors located in the bumper. Certain types of obstacle (stake, roadworks cone, etc.
Driving Front parking sensors Deactivation / Activation of the front and rear parking sensors In addition to the rear parking sensors, the front parking sensors are triggered when an obstacle is detected in front and the speed of the vehicle is still below 6 mph (10 km/h). The front parking sensors are interrupted if the vehicle stops for more than three seconds in forward gear, if no further obstacles are detected or when the speed of the vehicle exceeds 6 mph (10 km/h).
Driving Operating fault In the event of a malfunction of the system, when reverse gear is engaged this warning lamp is displayed in the instrument panel and/or a message appears in the screen, accompanied by an audible signal (short beep). Contact a PEUGEOT dealer or a qualified workshop. In bad weather or in winter, ensure that the sensors are not covered with mud, ice or snow. When reverse gear is engaged, an audible signal (long beep) indicates that the sensors may be dirty.
Driving Reversing camera 4 The reversing camera is activated automatically when reverse gear is engaged. Depending on version, the image is displayed in the touch screen or the instrument panel. The reversing camera function completes the parking assistance. The reversing camera cannot in any circumstances be a substitute for the vigilance and responsibility of the driver. The superimposed representation of guide lines helps with the manoeuvre.
Visibility Lighting controls Controls for selection and operation of the various front and rear lamps providing the vehicle's lighting and signalling. 138 Main lighting Additional lighting There are various lamps on the vehicle: sidelamps, to be seen, dipped beam headlamps to see without dazzling other drivers, main beam headlamps to see clearly when the road is clear, directional headlamps for improved visibility when cornering.
Visibility Selection ring for main lighting mode Turn the ring to position the symbol required facing the mark. 5 Lighting off. Automatic illumination of headlamps. Sidelamps only. Dipped or main beam headlamps. Model without AUTO lighting Dipping the headlamps Pull the stalk to switch the lighting between dipped / main beam headlamps. In the lighting off and sidelamps modes, the driver can switch on the main beam headlamps temporarily ("headlamp flash") by maintaining a pull on the stalk.
Visibility Foglamp selection ring The foglamps operate with dipped and main beam headlamps. In good or rainy weather, both day and night, the front foglamps and the rear foglamps are prohibited. In these situations, the power of their beams may dazzle other drivers. They should only be used in fog or snow. In these weather conditions, it is your responsibility to switch on the foglamps and dipped headlamps manually as the sunshine sensor may detect sufficient light.
Visibility Daytime running lamps Lighting left on audible signal An audible signal when a front door is opened warns the driver that the vehicle's exterior lighting is on, with the ignition off and in manual lighting mode. In this case, switching off the lighting stops the audible signal. With the ignition off, if the dipped headlamps remain on, the vehicle goes into "ECO" mode to avoid discharging the battery. In some weather conditions (e.g.
Visibility Manual guide-me-home lighting Temporarily keeping the dipped beam headlamps on after the ignition has been switched off makes the driver's exit easier when the light is poor. Switching on F Within 30 seconds or a minute after switching of the ignition (according to the lighting duration programmed in the main menu of the instrument panel), "flash" the headlamps using the lighting stalk. F A further "headlamp flash" switches the function off.
Visibility Automatic illumination of headlamps The sidelamps and dipped beam headlamps are switched on automatically, without any action on the part of the driver, when a low level of external light is detected or in certain cases of activation of the windscreen wipers. As soon as the brightness returns to a sufficient level or after the windscreen wipers are switched off, the lamps are switched off automatically. Activation F Turn the ring to the "AUTO" position.
Visibility Adaptive lighting System which automatically changes between dipped and main beam according to the driving conditions, using a sensor in the rear view mirror. The system is active from 15 mph (25 km/h) and is deactivated below 9 mph (15 km/h). Switching on F Put the lighting control stalk on the "AUTO" or "Dipped/main beam headlamps" position. F Press this button, the indicator lamp comes on.
Visibility Exterior welcome lighting Door mirror spotlamps Remote switching on of the lighting makes your approach to the vehicle easier in poor light. It is activated according to the level of light detected by the sunshine sensor. Switching on 5 F Press the open padlock on the remote control. The dipped beam headlamps and the sidelamps come on; your vehicle is also unlocked.
Visibility Manual adjustment of halogen headlamps Automatic adjustment of "full LED" technology headlamps To avoid causing a nuisance to other road users, the beams of the halogen headlamps should be adjusted according to the load in the vehicle. 0 Driver or driver + front passenger. Driver + front passenger + rear passengers. 1 5 people. 5 people + a load in the boot. 2 Driver + a load in the boot.
Visibility Additional headlamps Operation This system operates from a certain angle of rotation of the steering wheel. With dipped or main beam on, this system uses LEDs (light-emitting diodes) to illuminate the inside of a bend. The speed of the vehicle must be below 75 mph (120 km/h). This function is a available only with "full-LED" headlamps. System inactive 5 The system does not operate: below a certain angle of rotation of the steering wheel, above 75 mph (120 km/h), when reverse gear is engaged.
Visibility Secondary additional headlamps With dipped or main beams, this function makes use of the beam from a front foglamp to illuminate the inside of a bend, when the vehicle speed is below 25 mph (approximately 40 km/h). This additional lighting is particularly useful in town, at intersections, on very winding roads, when parking, ...
Visibility Wiper controls The vehicle's front and rear wipers are designed to improve the driver's visibility progressively according to the climatic conditions. Manual controls The wipers are controlled directly by the driver. Windscreen wipers Programming Wiping speed: Various automatic wiper control modes are also available according to the following options: automatic rain sensitive windscreen wipers, rear wiping on engaging reverse gear.
Visibility Windscreen and headlamp wash park, intermittent wipe, wash-wipe (set duration). Rear wiper Reverse gear Rear wiper selection ring: When reverse gear is engaged, the rear wiper will come into operation if the windscreen wipers are operating. If a significant accumulation of snow or ice is present, or when using a bicycle carrier on the boot, deactivate the automatic rear wiper via the instrument panel screen configuration menu.
Visibility Automatic rain sensitive windscreen wipers Screenwash/headlamp wash level low The windscreen wipers operate automatically, without any action on the part of the driver, if rain is detected (sensor behind the rear view mirror), adapting their speed to the intensity of the rainfall.
Visibility Special position of the windscreen wipers Operating fault If a fault occurs with the automatic rain sensitive wipers, the wipers will operate in intermittent mode. Have it checked by PEUGEOT dealer or a qualified workshop. Do not cover the rain sensor, linked with the sunshine sensor and located in the centre of the windscreen behind the rear view mirror. Switch off the automatic rain sensitive wipers when using an automatic car wash.
Visibility Courtesy lamps Front courtesy lamps In this position, the courtesy lamp comes on gradually: - when the vehicle is unlocked, when the key is removed from the ignition, when opening a door, when the remote control locking button is activated, in order to locate your vehicle. It switches off gradually: when the vehicle is locked, when the ignition is switched on, 30 seconds after the last door is closed. 1. 2. 3. 4.
Visibility Interior mood lighting The dimmed passenger compartment lighting improves visibility in the vehicle when the light is poor. 154 Switching on Switching off At night, interior mood light emitting diodes LEDs come on automatically when the sidelamps are switched on. The interior mood lighting switches off automatically when the sidelamps are switched off. It can be switched off manually by adjusting the instrument panel lighting dimmer button to the lowest setting.
Child safety General points relating to child seats Although one of PEUGEOT main criteria when designing your vehicle, the safety of your children also depends on you.
Child safety Child seat at the rear "Rearward facing" "Forward facing" Centre rear seat When a "rearward facing" child seat is installed on a rear passenger seat, move the vehicle's front seat forwards and straighten the backrest so that the "rearward facing" child seat does not touch the vehicle's front seat.
Child safety Child seat in the front* "Rearward facing" "Forward facing" When a "rearward facing" child seat is installed on the front passenger seat, adjust the seat to the fully back and highest position, with the backrest straightened. The passenger airbag must be deactivated. Otherwise, the child would risk being seriously injured or killed if the airbag were to inflate.
Child safety Deactivating the passenger's front airbag Never install a rearward facing child restraint system on a seat protected by an active front airbag. This could cause the death of the child or serious injury. The warning label present on both sides of the passenger's sun visor repeats this advice. In line with current legislation, the following tables contain this warning in all of the languages required.
Child safety AR BG НИКОГА НЕ инсталирайте детско столче на седалка с АКТИВИРАНА предна ВЪЗДУШНА ВЪЗГЛАВНИЦА. Това може да причини СМЪРТ или СЕРИОЗНО НАРАНЯВАНЕ на детето. CS NIKDY neumisťujte dětské zádržné zařízení orientované směrem dozadu na sedadlo chráněné AKTIVOVANÝM čelním AIRBAGEM. Hrozí nebezpečí SMRTI DÍTĚTE nebo VÁŽNÉHO ZRANĚNÍ. DA Brug ALDRIG en bagudvendt barnestol på et sæde, der er beskyttet af en AKTIV AIRBAG. BARNET risikerer at blive ALVORLIGT KVÆSTET eller DRÆBT.
Child safety 160 LT NIEKADA neįrenkite vaiko prilaikymo priemonės su atgal atgręžtu vaiku ant sėdynės, kuri saugoma VEIKIANČIOS priekinės ORO PAGALVĖS. Išsiskleidus oro pagalvei vaikas gali būti MIRTINAI arba SUNKIAI TRAUMUOTAS. LV NEKAD NEuzstādiet uz aizmuguri vērstu bērnu sēdeklīti priekšējā pasažiera sēdvietā, kurā ir AKTIVIZĒTS priekšējais DROŠĪBAS GAISA SPILVENS. Tas var izraisīt BĒRNA NĀVI vai radīt NOPIETNUS IEVAINOJUMUS.
Child safety Child seats recommended by PEUGEOT PEUGEOT offers a range of recommended child seats which are secured using a three point seat belt. Group 0+: from birth to 13 kg Group 1: from 9 to 18 kg L1 "RÖMER/BRITAX Baby-Safe Plus". Installed in the rearward-facing position. L2 "RÖMER Duo Plus ISOFIX". 6 Groups 2 and 3: from 15 to 36 kg L5 "KLIPPAN Optima". From the age of approximately 6 years (22 kg), the booster is used on its own.
Child safety Installing child seats attached using the seat belt In accordance with European regulations, this table indicates the options for installing child seats secured using a seat belt and universally approved (a) in accordance with the weight of the child and the seat in the vehicle.
Child safety a: universal child seat, child seat that can be installed in all vehicles using a seat belt. b: group 0, from birth to 10 kg. Shells seats and baby carriers cannot be installed in the front passenger seat. When installed in the 2nd row, they may prevent the use of the other seats. c: consult the legislation in force in your country before installing your child on this seat.
Child safety "ISOFIX" mountings Your vehicle has been approved in accordance with the latest ISOFIX regulation s. The seats, represented below, are fitted with regulation ISOFIX mountings. There are three rings for each seat. - Two rings A, located between the vehicle seat back and cushion, indicated by a label. - A ring B, behind the seat, referred to as the TOP TETHER for fixing the upper strap. The TOP TETHER is used to secure the upper strap of child seats that have one.
Child safety ISOFIX child seats recommended by PEUGEOT and approved for your vehicle "RÖMER Duo Plus ISOFIX" (size category B1) Group 1: from 9 to 18 kg Is installed only in the forward facing position. Is attached to the anchorage rings A and the upper anchorage ring B, referred to as the Top Tether, using an upper strap. Three seat body angles: sitting, reclining, lying down. We recommend the lying down position. 6 This seat can be used on seats not equipped with ISOFIX mountings.
Child safety Baby P2C Mini and its ISOFIX base (size category: E) Group 0+: from birth to 13 kg Installed "rearward facing" using an ISOFIX base which is attached to the anchorage rings A. The base has a support leg, adjustable for height, which sits on the vehicle's floor. This seat can also be secured with a seat belt. In this case only the seat shell is used.
Child safety Locations for installing ISOFIX child seats In accordance with European Regulations, this table indicates the options for installing ISOFIX child seats on seats in the vehicle fitted with ISOFIX mountings. In the case of universal and semi-universal ISOFIX child seats, the ISOFIX size category, determined by a letter from A to G, is indicated on the child seat next to the ISOFIX logo. Weight of the child / indicative age Less than 10 kg (group 0) Up to approx.
Child safety IUF: seat suitable for the installation of an Isofix Universal seat, "Forward facing" secured using the top belt. IL-SU: seat suitable for the installation of an Isofix Semi-Universal seat either: "rearward facing" fitted with a top belt or a support leg, "forward facing" fitted with a support leg, a shell seat fitted with an upper strap or a support leg. For advice on securing of the top belt, refer to the "Isofix mountings" section.
Child safety Recommendations Child seats The incorrect installation of a child seat in a vehicle compromises the child's protection in the event of an accident. Check that there is no seat belt or seat belt buckle under the child seat as this could destabilise it. Remember to fasten the seat belts or the child seat harnesses keeping the slack in relation to the child's body to a minimum, even for short journeys.
Child safety Electric child lock Remote control system to prevent opening of the rear doors using their interior controls and use of the rear electric windows. Any other status of the indicator lamp indicates a fault with the electric child lock. Have it checked by a PEUGEOT dealer or a qualified workshop. 170 Switching on Switching off F With the ignition on, press this button. The indicator lamp in the button comes on, accompanied by a message to confirm that the child lock is on.
Safety Direction indicators Hazard warning lamps Three flashes F Lower the lighting control stalk fully when moving to the left. F Raise the lighting control stalk fully when moving to the right. If you forget to cancel the direction indicators for more than twenty seconds, the volume of the audible signal will increase if the speed is above 40 mph (60 km/h).
Safety Emergency or assistance call Horn Audible warning system to alert other road users to an imminent danger. This system allows you to make an emergency or assistance call to the emergency services or to the dedicated PEUGEOT service. F Press the central part of the multifunction steering wheel. For more information on the use of this function, refer to the "Audio equipment and telematics" section.
Safety Warning triangle This safety device should be used in addition to the hazard warning lamps. Its presence in the vehicle is mandatory. Placing the triangle in the road F Place the triangle behind the vehicle, as required by the legislation in force in your country. The location for stowing a folded triangle is in the inner trim panel of the boot lid. Before leaving your vehicle to set up and install the triangle, switch on the hazard warning lamps and put on your high visibility vest.
Safety Tyre under-inflation detection System which automatically checks the pressures of the tyres while driving. The system continuously monitors the pressures of the four tyres, as soon as the vehicle is moving. A pressure sensor is located in the valve of each tyre (except the spare wheel). The system triggers an alert if a drop in pressure is detected in one or more tyres.
Safety Under-inflation alert The alert is given by the fixed illumination of this warning lamp, accompanied by an audible signal, and depending on equipment, the display of a message. In the event of a problem on one of the tyres, the symbol or the message appears, according to equipment, to identify it. F Reduce speed, avoid sudden steering movements or harsh brake applications. F Stop as soon as it is safe to do so.
Safety Electronic stability control (ESC) Electronic Stability Control (ESC) incorporating the following systems: the anti-lock braking system (ABS) and the electronic brake force distribution (EBFD), the emergency braking assistance, the anti-slip regulation (ASR) or traction control, the dynamic stability control (DSC).
Safety Snow driving assistance (Intelligent Traction Control) Your vehicle has a system to help driving on snow: Intelligent Traction Control. This automatic system continuously checks for situations of difficult surface adhesion that could make it difficult to move off or make progress on deep fresh snow or compacted snow. In these situations, Intelligent Traction Control limits the amount of wheel slip to provide the best traction and trajectory control.
Safety Anti-slip regulation (ASR) Deactivation Reactivation In exceptional conditions (starting a vehicle which is bogged down, stuck in snow, on soft ground...), it may be advisable to deactivate the ASR system, so that the wheels can turn freely and regain grip. The system is reactivated automatically each time the ignition is switched back on or from 12 mph (20 km/h). F Press the "ASR OFF" button again to reactivate it manually.
Safety Seat belts Front seat belts Rear seat belts The rear seats are each fitted with a seat belt, three-point anchorages with inertia reel and force limiter (except for the centre rear seat). The front seat belts are fitted with a pretensioning and force limiting system. This system improves safety in the front seats in the event of a front or side impact. Depending on the severity of the impact, the pretensioning system instantly tightens the seat belts against the body of the occupants.
Safety Front and rear seat belt warning lamps On switching on the ignition, warning lamp 1 comes on in the instrument panel and the corresponding warning lamp (2 to 6) comes on in red in the passenger's seat belt and front airbag warning lamp display if the corresponding seat belt is not fastened or is unfastened. Front seat belt height adjustment F To adjust the anchorage point, squeeze the control and slide it until you find a notch. Seat belt not fastened / unfastened warning lamps 1. 2. 3. 4. 5. 6.
Safety The driver must ensure that passengers use the seat belts correctly and that they are all restrained securely before setting off. Wherever you are seated in the vehicle, always fasten your seat belt, even for short journeys. Do not interchange the seat belt buckles as they will not fulfil their role fully. The seat belts are fitted with an inertia reel permitting automatic adjustment of the length of the strap to your size. The seat belt is stowed automatically when not in use.
Safety Airbags System designed to maximise the safety of the occupants (with the exception of the rear centre passenger) in the event of violent collisions. The airbags supplement the action of the forcelimiting seat belts (with the exception of the centre rear passenger).
Safety To assure the safety of your child, the passenger's front airbag must be deactivated when you install a "rear facing" child seat on the front passenger seat. Otherwise, the child would risk being seriously injured or killed if the airbag were deployed. Reactivation Deactivation Only the passenger's front airbag can be deactivated: F insert the key in the passenger airbag deactivation switch, F turn it to the "OFF" position, F then, remove the key keeping the switch in the new position.
Safety Lateral airbags Deployment The curtain airbag is deployed at the same time as the corresponding lateral airbag in the event of a serious side impact applied to all or part of the side impact zone B, perpendicular to the longitudinal centreline of the vehicle on a horizontal plane and directed from the outside towards the inside of the vehicle. The curtain airbag inflates between the front or rear occupant of the vehicle and the windows.
Safety For the airbags to be fully effective, observe the following safety rules: Sit in a normal upright position. Wear a correctly adjusted seat belt. Do not leave anything between the occupants and the airbags (a child, pet, object...). This could hamper the operation of the airbags or injure the occupants. After an accident or if the vehicle has been stolen or broken into, have the airbag systems checked. All work on the airbag system must be carried out by a PEUGEOT dealer or a qualified workshop.
Practical information Temporary puncture repair kit Complete system consisting of a compressor and a sealant cartridge which permits temporary repair of a tyre so that you can drive to the nearest garage. It is designed to repair most punctures which could affect the tyre, located on the tyre tread or shoulder. Access to the kit List of tools This kit is installed in the storage box, under the boot floor. All of these tools are specific to your vehicle and can vary according to equipment.
Practical information Description of the kit A. B. C. D. E. "Sealant" or "Air" position selector. On "I" / off "O" switch. Deflation button. Pressure gauge (in bar and p.s.i.). Compartment housing: - a cable with adaptor for 12 V socket, - various inflation adaptors for accessories, such as balls, bicycle tyres... F. G. H. I. Sealant cartridge. White pipe with cap for repair. Black pipe for inflation. Speed limit sticker.
Practical information Repair procedure 1. Sealing F Switch off the ignition. F Turn the selector A to the "sealant" position. F Check that the switch B is in position "O". Avoid removing any foreign bodies which have penetrated into the tyre. 188 F Uncoil the white pipe G fully. F Unscrew the cap from the white pipe. F Connect the white pipe to the valve of the tyre to be repaired. Take care, this product is harmful (e.g. ethylene-glycol, colophony...) if swallowed and causes irritation to the eyes.
Practical information F Switch on the compressor by moving the switch B to position "I" until the tyre pressure reaches 2.0 bars. The sealant is injected into the tyre under pressure; do not disconnect the pipe from the valve during this operation (risk of splashing). If after around 5 to 7 minutes the pressure is not attained, this indicates that the tyre is not repairable; contact a PEUGEOT dealer or a qualified workshop for assistance. F Remove the kit and screw the cap back on the white pipe.
Practical information 2. Inflation F Turn the selector A to the "air" position. F Uncoil the black pipe H fully. F Connect the black pipe to the valve of the wheel. F Connect the compressor's electric plug to the vehicle's 12 V socket. F Start the vehicle again and leave the engine running. As soon as possible, go to a PEUGEOT dealer or a qualified workshop. You must inform the technician that you have used this kit.
Practical information Removing the cartridge F Stow the black pipe. F Detach the angled base from the white pipe. F Support the compressor vertically. F Unscrew the cartridge from the bottom. Beware of discharges of fluid. The expiry date of the fluid is indicated on the cartridge. The sealant cartridge is designed for single use; even if only partly used, it must be replaced. After use, do not discard the cartridge into the environment, take it to an authorised waste disposal site or a PEUGEOT dealer.
Practical information Changing a wheel Procedure for changing a faulty wheel for the spare wheel using the tools provided with the vehicle. Access to the tools 3. "Bolt cover" tool. For removing the bolt protectors (covers) on alloy wheels. 4. Socket for the security bolts (located in the glove box). For adapting the wheelbrace to the special "security" bolts. 5. A wheel chock for immobilising the vehicle*. 6. Towing eye. See "Towing the vehicle". The tools are installed in the boot under the floor.
Practical information Access to the spare wheel Wheel with trim When refitting the wheel, refit the trim starting by placing its notch facing the valve and press around its edge with the palm of your hand. The spare wheel is located in the boot under the floor. According to country, the spare wheel may be steel, alloy or of the "space-saver" type. To gain access to it, refer to the "Access to the tools" section. Taking out the wheel F Unscrew the (coloured) central bolt.
Practical information Putting the wheel back in place F Put the wheel back in its housing. F Unscrew the (coloured) central bolt by a few turns then put it in place in the centre of the wheel. F Tighten fully until the central bolt clicks to retain the wheel correctly. 194 F Put the box back in place in the centre of the wheel and clip it. F Put the polystyrene storage box back in place. Tyre under-inflation detection The spare wheel (space-saver or steel rim) does not have a sensor.
Practical information Removing a wheel Parking the vehicle Immobilise the vehicle where it does not block traffic: the ground must be level, stable and not slippery. Apply the parking brake unless it has been programmed to automatic mode, switch off the ignition and block the wheels: engage first gear with a manual gearbox, place the lever in position R with an electronic gearbox, place the lever in position P with an automatic gearbox.
Practical information Ensure that the jack is stable. If the ground is slippery or loose, the jack might slip or drop - Risk of injury! Take care to position the jack only at one of the vehicle's jacking points A or B under the vehicle, ensuring that the contact surface of the vehicle's jacking point is centred on the head of the jack.
Practical information Fitting a wheel Fitting the "space-saver" spare wheel If your vehicle is fitted with alloy wheels, when tightening the bolts on fitting, it is normal to notice that the washers do not come into contact with the "space-saver" spare wheel. The wheel is secured by the conical surface of each bolt. After changing a wheel List of operations To store the punctured wheel in the boot correctly, first remove the central cover.
Practical information F Lower the vehicle fully. F Fold the jack 2 and detach it. 198 F Tighten the security bolt using the wheelbrace 1 fitted with the security socket 4. F Tighten the other bolts using the wheelbrace 1 only. F Refit the bolt covers on each of the bolts (according to equipment). F Store the tools in the box.
Practical information Snow chains In wintry conditions, snow chains improve traction as well as the behaviour of the vehicle when braking. The snow chains must be fitted only to the front wheels. They must never be fitted to "space-saver" type spare wheels. Take account of the legislation in force in your country on the use of snow chains and the maximum running speed authorised.
Practical information Changing a bulb Front lamps Model with "full LED" technology headlamps 1. 2. 3. 4. 5. 6. Additional lighting. Dipped beam headlamps. Main beam headlamps. Daytime running lamps. Direction indicators / Sidelamps. Front foglamps. All of these lamps use light-emitting diodes - LEDs. 200 For the replacement of these lightemitting diode (LED) lamps, contact a PEUGEOT dealer or a qualified workshop. In some weather conditions (e.g.
Practical information The headlamps are fitted with polycarbonate glass with a protective coating: F do not clean them using a dry or abrasive cloth, nor with a detergent or solvent product, F use a sponge and soapy water or a pH neutral product, F when using a high pressure washer on persistent marks, do not keep the lance directed towards the lamps or their edges for too long, so as not to damage their protective coating and seals. RHX internal combustion model (lower part) 1. 2.
Practical information Halogen model Main beam headlamps F Remove the protective plastic cover by pulling on the tab. F Unclip the bulb connector. F Extract the bulb by pulling and change it. F Remove the protective plastic cover by pulling on the tab. F Unclip the bulb connector. F Remove the bulb by pulling it out and change it. For reassembly, carry out these operations in reverse order. For the left hand headlamp, it is necessary to remove the battery. Refer to the corresponding section.
Practical information Rear lamps (Saloon) 1. 2. 3. 4. Brake lamps (light emitting diodes - LEDs). Sidelamps (light emitting diodes - LEDs). Direction indicators (PY21W amber). Foglamps (light-emitting diodes) / Reversing lamps (W16W). Light emitting diodes-LEDs For replacement, contact a PEUGEOT dealer or qualified workshop. Direction indicators and reversing lamp Direction indicators Reversing lamp F Open the boot, then the plastic cover. F Remove the two lamp unit fixing nuts.
Practical information Rear lamps (SW) 1. 2. 3. 4. 5. Brake lamps (light emitting diodes - LEDs). Reversing lamps (W19W). Direction indicators (PY21W amber). Sidelamps (light emitting diodes - LEDs). Foglamps (light emitting diodes - LEDs). Light emitting diodes-LEDs For replacement, contact a PEUGEOT dealer or qualified workshop. 204 Direction indicators (on the wings) F Open the boot then remove the access cover. F Remove the sealing foam. F Disconnect the lamp connector.
Practical information Reversing lamp (tailgate) F Open the tailgate and then remove the access cover. F Disconnect the lamp connector. F Remove the lamp fixing nut. F Carefully remove the lamp from the outside. F Remove the sealing foam. F Turn the bulb holder a quarter of a turn and pull it out. For reassembly, carry out these operations in reverse order.
Practical information Third brake lamp (light emitting diodes - LEDs) Contact a PEUGEOT dealer or qualified workshop. 206 Number plate lamps F Insert a thin screwdriver into one of the outer holes of the lens. F Push it outwards to unclip. F Disconnect the lamp connector. F Remove the lens. F Pull the bulb out and change it.
Practical information Changing a fuse Procedure for replacing a failed fuse with a new fuse to rectify a failure of the corresponding function. Access to the tools Changing a fuse Installing electrical accessories Good The extraction tweezer and spare fuses are located in the glove box. Failed Before changing a fuse, the cause of the failure must be identified and rectified. F Identify the failed fuse by checking the condition of its filament.
Practical information Dashboard fuses The fusebox is placed in the lower dashboard (left-hand side). Access to the fuses F Open the hinged panel, then apply light force to bypass the stops. 208 Fuse N° Rating (A) F6 A or B 15 Audio system. F8 3 Alarm. F13 10 Front cigar lighter. F14 10 Front 12 V socket. F16 3 Rear courtesy lamp, rear map reading lamps. F17 3 Front courtesy lamp, courtesy mirror. F28 A or B 15 Audio system. F30 20 Rear wiper. F32 10 Audio amplifier.
Practical information Fuses behind the glove box Fuse N° Rating (A) F3 15 Driver's electric window panel, 12 V socket for rear seats. F4 15 12 V socket in boot. F5 30 One-touch rear window. F6 30 One-touch front window. F11 20 Trailer unit. F12 20 Audio amplifier. F15 20 Panoramic sunroof blind (SW). F16 5 Driver's electric window switch panel.
Practical information Engine compartment fuses The fusebox is placed in the engine compartment near the battery. Access to the fuses F Unclip the cover. F Change the fuse (see corresponding paragraph). F When you have finished, close the cover carefully to ensure correct sealing of the fusebox. 210 Fuse N° Rating (A) F20 15 Front / rear screenwash pump. F21 20 Headlamp wash pump. F22 15 Horn. F23 15 Right-hand main beam headlamp. F24 15 Left-hand main beam headlamp.
Practical information 12 V battery Procedure for starting the engine using another battery or charging a discharged battery. Access to the battery Before doing any work The presence of this label, in particular with the Stop & Start system, indicates the use of a 12 V lead-acid battery with special technology and specification; the involvement of a PEUGEOT dealer or a qualified workshop is essential when replacing or disconnecting the battery.
Practical information Disconnecting the (+) cable Starting using another battery When your vehicle's battery is discharged, the engine can be started using a slave battery (external or on another vehicle) and jump lead cables. F Raise the locking tab D fully to release the cable terminal clamp E. Reconnecting the (+) cable F Position the open clamp E of the cable on the positive post (+) of the battery. F Press vertically on the clamp E to position it correctly on the battery.
Practical information F Operate the starter on the broken down vehicle and let the engine run If the engine does not start straight away, switch off the ignition and wait a few moments before trying again. F Wait until the engine returns to idle then disconnect the jump lead cables in the reverse order. F Refit the plastic cover to the (+) terminal, if your vehicle has one.
Practical information Charging the battery using a battery charger With Stop & Start, the battery does not have to be disconnected for charging. F Disconnect the battery from the vehicle. F Follow the instructions for use provided by the manufacturer of the charger. F Connect the battery starting with the negative terminal (-). F Check that the terminals and connectors are clean. If they are covered with sulphate (whitish or greenish deposit), remove them and clean them.
Practical information Removing - refitting the battery* This procedure allows you to safely remove the battery when needed to change a failed bulb. Before removal - You can also call on a PEUGEOT dealer or a qualified workshop to carry out this procedure. - Place the vehicle in a ventilated location, with free access and preferably on a level surface. Apply the parking brake. Put the gear lever into neutral (position N for an automatic or electronic gearbox).
Practical information Removal - 216 Disconnect the positive (+) terminal from the battery. - Remove the battery cover 1. - Release 2 then disconnect the negative (-) terminal from the battery. - Unclip the wiring harnesses 3. - Unclip and move aside the wiring harness 4. Remove the nut 5 from the positive (+) cable. Move aside wiring harness 6.
Practical information - Using a screwdriver, unclip the clips 7 and 8. Raise the power shut-off unit 9. Move this unit forward out of the way. - - Unclip the clips. Remove the battery cover 10. - - Using a scewdriver, lever the fixing 11 aside and remove the battery.
Practical information Refitting After refitting - If the vehicle has an electric parking brake, check that it is working correctly by releasing and applying it. Switch the ignition off. - Get out of the vehicle then check that the remote control works correctly. Set: the time, the preset radio stations and the audio settings. To reassemble, carry out the removal operations in reverse order, connecting the positive (+) terminal last. - - - 218 Check that the battery terminals are secure.
Practical information Load reduction mode Energy economy mode System which manages the use of certain functions according to the level of charge remaining in the battery. When the vehicle is being driven, the load reduction function temporarily deactivates certain functions, such as the air conditioning, the heated rear screen... The deactivated functions are reactivated automatically as soon as conditions permit.
Practical information Changing a wiper blade Before removing a front wiper blade F Within one minute after switching off the ignition, operate the wiper stalk to position the wiper blades vertically on the windscreen. Removing F Raise the corresponding wiper arm. F Unclip the wiper blade and remove it. 220 Fitting F Put the corresponding new wiper blade in place and clip it. F Fold down the wiper arm carefully. After fitting a front wiper blade F Switch on the ignition.
Practical information Towing the vehicle Procedure for having your vehicle towed or for towing another vehicle using a removable towing eye. Access to the tools Towing your vehicle The towing eye is installed in the boot under the floor. To gain access to it: F open the boot, F position the floor vertically, F remove the towing eye. F On the front bumper, unclip the cover by pressing at the bottom. F Screw the towing eye in fully. F Install the towing bar.
Practical information Towing another vehicle F On the rear bumper, unclip the cover by pressing at the bottom. F Screw the towing eye in fully. F Install the towing bar. F Switch on the hazard warning lamps on the towed vehicle. 222 General recommendations Observe the legislation in force in your country. Ensure that the weight of the towing vehicle is higher than that of the towed vehicle. The driver must remain at the wheel of the towed vehicle and must have a valid driving licence.
Practical information Towing a trailer Blanking cover Towbar suitable for the attachment of a trailer or installation of a bicycle carrier, with additional lighting and signalling. Your vehicle is primarily designed for transporting people and luggage, but it may also be used for towing a trailer. When towing, you must remove the blanking cover if your vehicle has one. Contact a PEUGEOT dealer or a qualified workshop for this.
Practical information Driving advice Distribution of loads Cooling Braking F Distribute the load in the trailer so that the heaviest items are as close as possible to the axle and the nose weight approaches the maximum permitted without exceeding it. Air density decreases with altitude, thus reducing engine performance. Above 1 000 metres, the maximum towed load must be reduced by 10 % for every 1 000 metres of altitude. Towing a trailer on a slope increases the temperature of the coolant.
Practical information Fitting roof bars When fitting transverse roof bars, take care to position them correctly: - Saloon: there are retaining pins in the door apertures. Maximum authorised weight on the roof bars, for a loading height not exceeding 40 cm (with the exception of bicycle carriers): Saloon: 70 kg SW: 100 kg If the height exceeds 40 cm, adapt the speed of the vehicle to the profile of the road to avoid damaging the roof bars and the fixings on the roof.
Practical information Very cold climate screen Removable protective screen which prevents the accumulation of snow at the radiator cooling fan. Before fitting or removing the screen, ensure that the engine is off and the cooling fan has stopped. It is recommended that the screen be fitted and removed by a PEUGEOT dealer or a qualified workshop. Fitting Removal F Offer up the screen to the front of the top section of the front bumper upper grille. F Press on the screen to engage its fixing clips.
Practical information Accessories A wide range of accessories and genuine parts is available from the PEUGEOT dealer network. These accessories and parts have been tested and approved for reliability and safety. They are all suitable for your vehicle and benefit from PEUGEOT's recommendation and warranty. "Comfort": "Style": "Protection": cool box, smoker's kit, 230 V socket, torch...
Practical information "Multimedia": audio systems, portable navigation system, Takara/Sony portable video screen, Bluetooth system, speakers, DVD player, Wi-Fi, driving aids, video support, microwave unit...
Checks PEUGEOT & TOTAL, A partnership to deliver better performance! Innovation, the key to success The TOTAL Research and Development and PEUGEOT teams work together to develop high quality lubricants that meet the requirements of PEUGEOT vehicles. For you, this is the assurance that the performance of your engine is optimised while also ensuring its durability.
Checks Opening the bonnet Before doing anything under the bonnet, switch off the Stop & Start system to avoid any risk of injury resulting from an automatic change to START mode. Opening F From inside: pull the release lever, located on the left below the dashboard, towards you. F From the outside: lift the safety catch and raise the bonnet. A bonnet strut opens the bonnet and holds it open. Closing F Lower the bonnet and release it at the end of its travel. F Check that it is latched correctly.
Checks Running out of fuel (Diesel) On vehicles fitted with HDi engines, the fuel system must be primed if you run out of fuel; refer to the corresponding engine compartment view. If the tank on your vehicle is fitted with a misfuel prevention device, refer to the "Misfuel prevention (Diesel)" section. If the engine does not start first time, don't keep trying but start the procedure again from the beginning. 2 litre BlueHDi engine F Fill the fuel tank with at least five litres of Diesel.
Checks Petrol engines The various caps and covers allow access for checking the levels of the various fluids and for replacing certain components. 1. Power steering reservoir. 2. Screenwash and headlamp wash reservoir. 3. Coolant reservoir. 4. Brake fluid reservoir. 5. Battery / Fuses. 6. Fusebox. 7. Air filter. 8. Engine oil dipstick. 9. Engine oil filler cap. 1.6 litre 16V VTi 120 hp 1.
Checks Petrol engines The various caps and covers allow access for checking the levels of the various fluids and for replacing certain components. 1. Power steering reservoir. 2. Screenwash and headlamp wash reservoir. 3. Coolant reservoir. 4. Brake fluid reservoir. 5. Battery / Fuses. 6. Fusebox. 7. Air filter. 8. Engine oil dipstick. 9. Engine oil filler cap. 1.
Checks Diesel engines The various caps and covers allow access for checking the levels of the various fluids, for replacing certain components and for priming the fuel system. 1. Power steering reservoir. 2. Screenwash and headlamp wash reservoir. 3. Coolant reservoir. 4. Brake fluid reservoir. 5. Battery / Fuses. 6. Fusebox. 7. Air filter. 8. Engine oil dipstick. 9. Engine oil filler cap. 10. Priming pump*. 11. Bleed screw*. * According to engine. 234 1.6 litre HDi 115 hp 2.
Checks Diesel engines The various caps and covers allow access for checking the levels of the various fluids, for replacing certain components and for priming the fuel system. 1. Power steering reservoir. 2. Screenwash and headlamp wash reservoir. 3. Coolant reservoir. 4. Brake fluid reservoir. 5. Battery / Fuses. 6. Fusebox. 7. Air filter. 8. Engine oil dipstick. 9. Engine oil filler cap. 10. Priming pump*. 11. Bleed screw*. 2.0 litre HDi 160 hp 9 * According to engine. 2.
Checks BlueHDi Diesel engines The various caps and covers allow access for checking the levels of the various fluids, for replacing certain components and for priming the fuel system. 1. Power steering reservoir. 2. Screenwash and headlamp wash reservoir. 3. Coolant header tank. 4. Brake fluid reservoir. 5. Battery / Fuses. 6. Fusebox. 7. Air filter . 8. Engine oil dipstick. 9. Engine oil filler cap. 2.0 litre Blue HDi 150 hp 2.
Checks Checking levels Check all of these levels regularly, in line with the warranty and maintenance record. Top them up if necessary, unless otherwise indicated. If a level drops significantly, have the corresponding system checked by a PEUGEOT dealer or a qualified workshop. Take care when working under the bonnet, as certain areas of the engine may be extremely hot (risk of burns) and the cooling fan could start at any time (even with the ignition off).
Checks Brake fluid level Topping up the engine oil level Engine oil change Refer to the "Petrol engine" or "Diesel engine" section for the location of the oil filler cap in the engine compartment of your vehicle. F Unscrew the oil filler cap to reveal the filler aperture. F Add oil in small quantities, avoiding any spills on engine components (risk of fire). F Wait a few minutes before checking the level again using the dipstick. F Add more oil if necessary.
Checks Coolant level The coolant level should be close to the "MAX" mark but should never exceed it. When the engine is warm, the temperature of the coolant is regulated by the fan. The cooling fan may start after switching off the engine: take care with articles and clothing that might be caught by the fan blades. In addition, as the cooling system is pressurised, wait at least one hour after switching off the engine before carrying out any work.
Checks Checks Unless otherwise indicated, check these components in accordance with the warranty and maintenance record and according to your engine. Otherwise, have them checked by a PEUGEOT dealer or a qualified workshop. 12 V battery The battery does not require any maintenance. However, check that the terminals are clean and correctly tightened, particularly in summer and winter.
Checks Manual gearbox The gearbox does not require any maintenance (no oil change). Refer to the warranty and maintenance record for the details of the level checking interval for this component. Electronic gearbox The gearbox does not require any maintenance (no oil change). Refer to the warranty and maintenance record for details of the checking interval for this component. Automatic gearbox The gearbox does not require any maintenance (no oil change).
Checks AdBlue® additive and SCR system for BlueHDi Diesel engines To assure respect for the environment and conformity with the new Euro 6 emissions standard, without adversely affecting the performance or fuel consumption of Diesel engines, PEUGEOT has taken the decision to equip its vehicles with an effective system that associates SCR (Selective Catalytic Reduction) with a particle filter (FAP) for the treatment of exhaust gases.
Checks Range indicators When switching on the ignition, an indicator gives an estimate of the distance that can be travelled with your vehicle before engine starting is automatically prevented, once the vehicle starts using the reserve of AdBlue ® or after a fault is detected with the SCR system. In the event of simultaneous system fault and low AdBlue ® level, the shortest range is the one displayed.
Checks Remaining range between 350 and 1500 miles (600 and 2 400 km) When switching on the ignition, the UREA warning lamp comes on, accompanied by an audible signal and the display of a message (e.g.: "Top up emissions additive: Starting prevented in 900 miles") indicating the remaining range expressed in miles or kilometres. When driving, the message is displayed every 150 miles (300 km) until the additive tank has been topped-up.
Checks In the event of a fault with the the SCR emissions control system In the event of the detection of a fault A system that prevents engine starting is activated automatically from 650 miles (1 100 km) after confirmation of a fault with the SCR emissions control system. Have the system checked by a PEUGEOT dealer or a qualified workshop as soon as possible.
Checks Starting prevented Every time the ignition is switched on, the SERVICE and engine diagnostic warning lamps come on and the UREA warning lamp flashes, accompanied by an audible signal and the display of the message "Emissions fault: Starting prevented". You have exceeded the authorised driving limit: the starting prevention system inhibits engine starting. To be able to start the engine, you must call on a PEUGEOT dealer or a qualified workshop.
Checks Topping-up the AdBlue® additive Filling the AdBlue ® tank is an operation included in every routine service on your vehicle by a PEUGEOT dealer or a qualified workshop. Nevertheless, given the capacity of the tank, it may be necessary to top-up the additive between services, more particularly if an alert (warning lamps and a message) signals the requirement. You can got to a PEUGEOT dealer or a qualified workshop. If you envisage topping-up yourself, please read the following warnings carefully.
Checks Recommendations on storage Procedure AdBlue ® freezes at about -11°C and deteriorates above 25°C. It is recommended that bottles be stored in a cool area and protected from direct sunlight. Under these conditions, the additive can be kept for at least a year. If the additive has frozen, can be used once it has completely thawed out. Before topping-up, ensure that the vehicle is parked on a flat and level surface. In wintry conditions, ensure that the temperature of the vehicle is above -11°C.
Checks F After emptying the bottle, wipe away any spillage around the tank filler using a damp cloth. F Obtain a bottle of AdBlue ®. After first checking the use-by date, read carefully the instructions on use on the label before pouring the contents of the bottle into your vehicle's AdBlue ® tank. Important: if your vehicle's AdBlue ® tank is completely empty which is confirmed by the alert messages and the impossibility of starting the engine, you must add at least 3.8 litres (so two 1.
Technical data Petrol engines and gearboxes Petrol engine Gearbox Model code 1.6 litre VTi 120 hp 1.6 litre THP 155 hp Electronic (6-speed) Manual (6-speed) Automatic (6-speed) 8D5FH8/P - 8E5FH8/P 8D5FS8/P - 8E5FS8/P 8D5FV8 - 8E5FV8 8D5FNA - 8E5FNA 8D5FVA - 8E5FVA Emissions standard Euro 5 Euro 5 Cubic capacity (cc) 1 598 1 598 Bore x stroke (mm) 77 x 85.8 77 x 85.
Technical data 1.6 litre e-THP 165 hp Petrol engine Gearbox Model code Emissions standard Manual (6-speed) Automatic (6-speed) 8D5GZ-M / S - 8E5GZ-M / S 8D5GZ-T / S - 8E5GZ-T / S - - Cubic capacity (cc) 1 598 Bore x stroke (mm) 77 x 85.8 Max power: EU standard (kW)* 121 Max power engine speed (rpm) 6 000 Max torque: EU standard (Nm) 240 Max torque engine speed (rpm) 1 400 Fuel Catalytic converter Unleaded yes Oil capacities (in litres) Engine (with filter replacement) 4.
Technical data Petrol weights and towed loads (in kg) 1.6 litre VTi 120 hp Petrol engines 1.
Technical data Petrol weights and towed loads (in kg) 1.
Technical data Diesel engines and gearboxes 1.6 litre HDi 115 hp Diesel engine Manual (6-speed) Electronic (6-speed) 8D9HL0 - 8E9HL0 8D9HR8/PS - 8E9HR8/PS Gearbox Model code Body Saloon SW Saloon SW Emissions standard Euro 5 Euro 5 Cubic capacity (cc) 1 560 1 560 Bore x stroke (mm) 75 x 88.
Technical data Diesel engines and gearboxes Diesel engine Gearbox Model code Body 2.0 litre HDi 140 hp 2.
Technical data Diesel engines and gearboxes 2.2 litre HDi 204 hp Diesel engine Automatic (6-speed) Gearbox Model code Body 8D4HLA - 8E4HLA Saloon SW Emissions standard Euro 5 Cubic capacity (cc) 2 179 Bore x stroke (mm) 85 x 96 Max power: EU standard (kW)* 150 Max power engine speed (rpm) 3 500 Max torque: EU standard (Nm) 450 Max torque engine speed (rpm) 2 000 Fuel Diesel Catalytic converter yes Particle filter yes Oil capacity (in litres) Engine (with filter replacement) 5.
Technical data BlueHDi Diesel engines and gearboxes Diesel engine 2.0 litre BlueHDi 150 2.
Technical data Diesel weights and towed loads (in kg) 1.
Technical data Diesel weights and towed loads (in kg) Diesel engine 2.0 litre HDi 140 hp Manual (6-speed) Automatic (6-speed) Manual (6-speed) 8DRHR8 - 8ERHR8 8DRHF8 - 8ERHF8 8DRHHA - 8ERHHA 8DRHDA - 8ERHDA 8DRHH8 - 8ERHH8 Gearbox Model code Body 2.
Technical data Diesel weights and towed loads (in kg) 2.
Technical data BlueHDi Diesel weights and towed loads (in kg) Diesel engine 2.0 litre BlueHDi 150 2.
Technical data Dimensions (in mm) Saloon 262 SW
Technical data RXH internal combustion version (available during the 2nd half of 2014) Be aware of the ground clearance of your vehicle: around 184 mm (with the vehicle in working order: driver only and the fuel tank full) in ideal conditions. This value will vary with vehicle load, the nature of the ground surface and the surroundings. If the driver considers that the vehicle can traverse an obstacle, they assume entire responsibility for this.
Technical data Identification markings Various visible markings for the identification and tracing of your vehicle. It bears the following information: the tyre inflation pressures with and without load, the tyre sizes, the inflation pressure of the spare wheel, the paint colour code. - 264 A. Vehicle Identification Number (VIN) under the bonnet. This number is engraved on the bodywork near the damper support. C. Manufacturer's label.
Emergency or assistance call 265
Emergency or assistance call PEUGEOT Connect SOS In an emergency, press this button for more than 2 seconds. Flashing of the green LED and a voice message confirm that the call has been made to the "PEUGEOT Connect SOS" centre*. The green LED remains on (without flashing) when communication is established. It goes off at the end of communication. Pressing this button again immediately cancels the request. The green LED goes off.
JBL EQUIPMENT The Hi-Fi system is a 5.1 system developed by PEUGEOT in conjunction with JBL. 4 two-way speaker kits, separated by an active filter, are fitted at front and rear. These are based on a fabric dome tweeter delivering stable and balanced treble reproduction and a 50W RMS neodymium magnet inverted motor medium-woofer possessing a very high output of bass frequencies.
268
7-inch touch screen GPS satellite navigation system Multimedia audio system Bluetooth® telephone CONTENTS The system is protected in such a way that it will only operate in your vehicle. For safety reasons, the driver must carry out operations which require prolonged attention while the vehicle is stationary. When the engine is switched off and to prevent discharging of the battery, the system switches off following the activation of the energy economy mode. 01 General operation p.
01 General operation "Navigation"* allows settings for navigation and the choice of a destination. "Driving assistance" allows access to the trip computer and certain vehicle functions to be activated, deactivated and adjusted. 270 "Telephone" allows the connection of a mobile telephone via Bluetooth. "Media" allows selection of a radio station, the various music sources and the display of photographs.
01 General operation Use the buttons below the touch screen for access to the menus, then press the virtual buttons in the touch screen. Each menu is displayed in one or two pages (primary page and secondary page). Primary page Secondary page In very hot conditions, the system may go into stand-by (screen and sound completely off) for a minimum period of 5 minutes.
02 First steps With the engine running, press to mute the sound. With the ignition off, press to switch the system on. Short-cuts: using the touch buttons in the upper band of the touch screen, it is possible to go directly to the selection of audio source, the list of stations (or titles, depending on the source). Volume adjustment (each source is independent, including Traffic announcements (TA) and navigation instructions).
03 Steering mounted controls - Press: access to the instrument panel screen menu. Rotate: navigation in the instrument panel screen menu. - Increase volume. - Mute / restore sound. - Decrease volume. - Rotate Radio: automatic selection of next / previous frequency. Media: previous / next track. Short press then rotate: access to the preset stations. Short press: change the audio source. - TEL/SRC button (short press): Accept an incoming call.
04 Media Level 1 "Media" Level 2 List of FM stations Primary page Preset 274 Level 3
Level 1 Level 2 Level 3 Comments Media List of FM stations Press on a radio station to select it. List FM Radio DAB Radio AM Radio Jukebox Media CD Select change of source Source USB iPod Bluetooth AUX Media Pres an empty location to Preset it.
04 Media Level 1 "Media" Level 2 Level 3 List of FM stations Secondary page Media Photos Copy to Jukebox 276 Manage Jukebox
Level 1 Media Level 2 Level 3 Comments Preset Press a radio station to select it. Update list Update the list of stations received. Frequency Enter the desired radio frequency. Confirm Save the settings. Page selection Display the selected photo full screen. Rotate Rotate the photo 90°. Select all Select all the photos in the list. Press again to deselect. Secondary page Radio list Media Secondary page Photos Previous photo. Slideshow Pause / Play.
04 Media Level 1 Level 2 Level 3 "Media" Secondary page Media Settings Settings Settings 278
Level 1 Level 2 Level 3 Comments Media Secondary page Presentation of the last media used. Media list Random (all tracks): Media Random (current album): Choose the play settings. Settings Loop: Aux. amplification RDS options Media Radio Secondary page Settings DAB/FM options Display Radio Text Activate or deactivate the options. Settings DAB radio thumbnails Traffic announcements (TA) Announcements Weather Activate or deactivate the options.
04 Radio Selecting a station Press on Media to display the primary page. or Press on Media to display the primary page then go to the secondary page. Press Media to display the primary page then select "Preset". OR Select "List" in the primary page. or Select "Radio list" in the secondary page. Select a preset radio station in the list. Select a radio station from the list offered. If necessary, select change of source. Select "Update list" to refresh the list. Select "FM Radio" or "AM Radio".
04 Radio Changing a radio frequency Press on Media to display the primary page then press on the secondary page. Press on Media to display the primary page. OR By automatic frequency search Press 3 or 4 to move the cursor for an automatic search down or up for a radio frequency. Press on "Enter frequency" to display the primary page then press on the secondary page. THEN Enter the frequency in full (e.g.: 92.10 MHz) using the keypad then "Confirm". Select change source.
04 Radio Preset a station Select a radio station or frequency (refer to the corresponding section). Press on "Preset". Select a number in the list to preset the previously chosen radio station. A long press on a number presets (memorises) the station. Or A press on this button presets all of the stations one after the other. Recall pre-set stations Press on Media to display the primary page then select "Save".
04 Radio Activate/ Deactivate RDS Press on Media to display the primary page then go to the secondary page. Select "Settings". Select "Radio". Activate/deactivate "RDS options". RDS, if activated, allows you to continue listening to the same station by automatic retuning to alternative frequencies. However, in certain conditions, coverage of an RDS station may not be assured throughout the entire country as radio stations do not cover 100 % of the territory.
04 Radio Display of the name of the current station. Short-cut: access to the choice of audio source and the list of stations (or titles, depending on the source). Select the radio station. Any thumbnail broadcast by the station. Select the audio source. Display the "DAB" band. Manage the Jukebox. Display current action. Display of "Radiotext" for the current station. Secondary page. Next "Multiplex". Next radio station. Previous "Multiplex". Previous radio station.
04 Radio DAB (Digital Audio Broadcasting) Digital radio Digital radio - DAB / FM auto tracking Digital radio provides higher quality reception and also the graphical display of current information on the radio station being listened to. Select "List" in the primary page. The range of multiplexes available is displayed in alphabetical order. "DAB" does not cover 100% of the territory.
04 Music CD, MP3 CD, USB player, auxiliary input Insert the CD in the player, insert the USB memory stick in the USB player or connect the USB peripheral to the USB port using a suitable cable (not supplied). The system builds playlists (in temporary memory), an operation which can take from a few seconds to several minutes at the first connection. Reduce the number of non-music files and the number of folders to reduce the waiting time.
04 Music CD, MP3 CD / USB player Information and advice The audio equipment will only play audio files with ".wma, .aac, .flac, .ogg and. mp3" file extensions and with a bit rate of between 32 Kbps and 320 Kbps. It also supports VBR (Variable Bit Rate) mode. No other type of file (.mp4, ...) can be played. WMA files must be of the standard wma 9 type. The sampling rates supported are 11, 22, 44 and 48 KHz. It is advisable to restrict file names to 20 characters, without using of special characters (e.g.
04 Music Selecting a track to play Previous track. / List of USB or CD tracks and folders. Next track. / Up or down in the list. Previous folder. Confirm, next menu level. Next folder. Up one menu level.
04 Music Connecting APPLE® players Connect the Apple® player to one of the USB ports using a suitable cable (not supplied). Play starts automatically. Audio streaming Streaming allows audio files on your telephone to be played via the vehicle's speakers. Connect the telephone: see the "Telephone" section, then "Bluetooth". Choose the "Audio" or "All" profile. Control is via the audio system.
04 Music Using the auxiliary input (AUX) (cable not supplied) Connect the portable device (MP3 player…) to the auxiliary JACK socket using an audio cable. Select Media to display the primary page. Select change the source. Select the AUXILIARY source. First adjust the volume of your portable device (to a high level). Then adjust the volume of your audio system. Display and management of the controls are via the portable device.
04 Music Managing the Jukebox Connect the device (MP3 player...) to the USB port or auxiliary socket using a suitable audio cable. Select the magnifying glass to enter the folder or album and select audio file by audio file. When no audio file is copied to the system with a capacity of 8GB, all of the Jukebox function symbols are greyed and are not available. Select "Confirm" then "Copy". Select "Media list".
05 Navigation Level 1 Level 2 Navigation "Navigation" Primary page 292 Level 3 Route settings
Level 1 Level 2 Level 3 Enter destination Comments Display recent destinations Fastest Shortest Time/distance Ecological Calculatory criteria Tolls Choose the navigation criteria. The map displays the route chosen according to these criteria. Ferries Navigation Strict - Close Settings Navigation Show route on map Display the map and start navigation. Confirm Save the options. Save Save the current address. Stop navigation Delete the navigation information.
05 Navigation Level 1 "Navigation" Level 2 Enter destination Level 3 Address For managing contacts and their addresses, refer to the "Communications" section. Secondary page Contacts Navigation To use the telephone functions, refer to the "Communications" section.
Level 1 Level 2 Level 3 Comments Curr. location Points of Interest Address Navigation Address settings Town centre Save Save the current address. Add waypoint Add a waypoint to the route. Navigate to Press to calculate the route. Addresses Add contact Secondary page Contacts Enter destination Add waypoint Select a contact then calculate the route. Search for contact Navigate to From map Display the map and zoom to view the roads.
05 Navigation Level 1 Level 2 Level 3 Diversion "Navigation" Traffic messages Secondary page Map settings Map settings Navigation Settings Settings Settings Moving between the two menus.
Level 1 Level 2 Level 3 Comments On the route Navigation Secondary page Traffic messages Around vehicle Settings for the choice of messages and the filter radius. Near destination Detour over a distance Detour Recalculate route Finish Save the options. Flat view north heading Orientation Flat view vehicle heading Perspective view Navigation Maps Secondary page Map settings Choose the display and orientation of the map.
05 Navigation - Guidance Choosing a new destination Towards a new destination Press on Navigation to display the primary page then go to the secondary page. Select "Enter destination". Select "Navigate to". Choose the navigation criteria: "Fastest" or "Shortest" or "Time/distance" or "Ecological". Choose the restriction criteria: "Include tollroads", "Include ferries", "Traffic", "Strict", "Close". Select "Address". Select "Confirm" or press "Show route on map" to start navigation guidance.
05 Navigation - Guidance Towards a recent destination Press on Navigation to display the primary page then go to the secondary page. Towards a contact Navigation towards a contact imported from a telephone is only possible if the address entered is compatible with the system. Press on Navigation to display the primary page then go to the secondary page. Select "Enter destination". Select "Enter destination". Select "Contacts". Select an address from the list offered.
05 Navigation - Guidance 300 Towards GPS coordinates Towards a point on the map Press on Navigation to display the primary page then go to the secondary page. Press on Navigation to display the primary page then go to the secondary page. Select "Enter destination". Select "Enter destination". Select "Address". Select "From map". Enter the "Longitude:" then the "Latitude:". Zoom in on the map then select the point. Select "Navigate to".
05 Navigation - Guidance Towards points of interest (POI) Press on Navigation to display the primary page then go to the secondary page. Select "Search for POI". Select "All POIs" or "Garage" or "Dining/ hotels" or "Personal" or "By name". Points of Interest (POI) show all of the locations of services nearby (hotels, retail outlet, airports, ...). Select a point of interest from the list offered. Select "Navigate to". An annual mapping update allows new points of interest to be presented to you.
05 Navigation - Guidance Towards points of interest (POI) Press on Navigation to display the primary page then go to the secondary page. Select "Show POIs". Select a category from the list offered then "Confirm".
05 Navigation - Guidance Risk area / Danger zone alert settings Press on Navigation to display the primary page then go to the secondary page. Select "Confirm". Select "Settings". These functions are only available if Risk Areas have been downloaded and installed on the system. Select "Alert config.".
05 Navigation - Guidance Adding a waypoint Organising waypoints Press on Navigation to display the primary page then go to the secondary page. To organise waypoints, carry out the previous operations 1 to 3 again (Adding a waypoint). Select "Enter destination". Select the waypoint that you want to move in the order. Select "Itinerary". Select "Up". Select "Add waypoint" then "Address". Select "Down".
05 Navigation - Guidance Route options Calculation criteria Press Navigation to display the primary page then go to the secondary page. It is then possible to choose: the navigation criteria: "Fastest", "Shortest", "Time/distance", "Ecological". the exclusion criteria: "Include tollroads", "Include ferries", "Traffic", "Strict", "Close". Select "Settings". Select "Confirm". Select "Criteria". The ecological calculation is based on mapping data but this may not always be correct.
05 Traffic Traffic information Display of messages Setting filters Press on Navigation to display the primary page then go to the secondary page. Press on Navigation to display the primary page then go to the secondary page. Select "Traffic messages". Select "Settings". Set the "On the route", "Around", "Near destination" filters to fine-tune the list. Press again to remove the filter. Select "Info option". Select the message from the list offered.
05 Traffic Main traffic symbols Receiving TA messages Red and yellow triangle: traffic information, for example: Press on Navigation to display the primary page then go to the secondary page. Modified signs Narrow carriageway Slippery surface Accident Delay Roadworks Risk of explosion Road closed Demonstration Danger No entry Traffic jam Select "Settings". Select "Voice".
05 Traffic Diverting from a route Press on Navigation to display the primary page then go to the secondary page. Select "Recalculate route". The route will be modified in time and distance. Select "Traffic messages". Select "Confirm". Select "Diversion". The route may be diverted following the reception of a traffic information message. Select the diversion distance by pressing + or -.
05 Map Map settings Map orientation Press on Navigation to display the primary page then go to the secondary page. Select "Map settings". Select "Orientation". Select: "Flat view north heading" to keep the map always North up, "Flat view vehicle heading" to have the map follow the direction of travel, "Perspective view" to display a perspective view. Select "Confirm" to save the modifications.
05 Map Configure Press on Navigation to display the primary page then go to the secondary page. Select "Map settings". Select: ""Day" map colour" to have the map always in day mode. ""Night" map colour" to have the map always in night mode. "Automatic day/night" to have the brightness of the map adjusted automatically according to the ambient light level. This mode makes use of the vehicle's sunshine sensor or by manual operation of the vehicle's lighting. Then "Confirm" to save the modifications.
05 Settings Navigation speech synthesis Volume / Street names Press on Navigation to display the primary page then go to the secondary page. Select "Voice synthesis" and/or "Male voice" and/or "Female voice" and/or "Speak road names". Select "Settings". Select "Voice". Select "Confirm" to save the modifications.
06 Configuration Level 1 "Configuration" Level 2 Level 3 Audio settings Primary page Audio settings Audio settings Choice of color scheme 312
Level 1 Configuration Audio settings Level 2 Comments Ambience Choose the sound ambience. Balance Set the position of the sound in the vehicle using the Arkamys® system. Sound effects Set the volume or activate the link to vehicle speed. Ringtones Set the telephone ringtone and volume. Voice Set the volume and voice for speaking street names Confirm Save the settings. Configuration Turn off the display (black screen). A press on the black screen restores the display.
06 Configuration Level 1 "Configuration" Level 2 Units Secondary page Factory settings Configuration Adjust date and time Display screen 314
Level 1 Configuration Level 2 Comments Units Set the units used to display distance, fuel consumption and temperature. Delete data Select the desired data in the list then press Delete. Factory settings Return to factory settings. Confirm Save the settings. Confirm Set the date and time then confirm. Secondary page System Settings Configuration Secondary page Time/Date Automatic text scrolling Configuration Secondary page Deactivate animations Make the setting then confirm.
06 Configuration Level 1 "Configuration" Level 2 Choice of language Secondary page Configuration Calculator Calendar 316
Level 1 Level 2 Comments Configuration Secondary page Confirm Select the language then confirm. Languages Configuration Secondary page Select the calculator. Calculator Configuration Secondary page Select the calendar.
06 Configuration Audio settings Press on Configuration to display the primary page. Select "Audio settings". Select "Ambience" or "Balance" or "Sound effects" or "Ringtones" or "Voice". The distribution (or spatialisation using the Arkamys© system) of sound is an audio process that allows the audio quality to be adapted to the number of listeners in the vehicle. Available only with the 6-speaker configuration.
06 Configuration Color schemes Press on Configuration to display the primary page. Select "Color schemes". Select the colour scheme in the list then "Confirm". At each change of colour scheme the touch screen tablet's system restarts, showing a black screen for a few moments. For safety reasons, the procedure for changing the colour scheme is only possible with the vehicle stationary.
06 Configuration System Modify system settings Press on Configuration to display the primary page then go to the secondary page. Press on Configuration to display the primary page then go to the secondary page. Select "System Settings". Select "Screen settings". Select "Units" to change the units of distance, fuel consumption and temperature. Activate or deactivate "Activate automatic text scrolling" and "Activate animations".
06 Configuration Press on Configuration to display the primary page then go to the secondary page. Select: "Time/Date" to change the time zone, synchronisation with GPS, time and its format and then the date. "Languages" to change the language. "Calculator" to display a calculator "Calendar" to display a calculator.
07 Connected services Level 1 Level 2 "Connected services" Primary page: Driving assistance applications, see following page on "PEUGEOT CONNECT APPS"*. Identification Secondary page: Internet navigation via Bluetooth telephone Dial-Up Networking (DUN). DUN connection settings It may be that certain new generation smartphones are not compatible with this standard. Transfer rate * Depending on country.
07 PEUGEOT CONNECT APPS "PEUGEOT CONNECT APPS" is a service providing driving aid applications in real time, that gives access to useful information such as the state of the traffic, danger zones, fuel prices, the availability of parking places, tourist sites, weather conditions, correct addresses… It includes access to the mobile network associated with the use of these applications.
08 Telephone Level 1 Level 2 "Telephone" Primary page Call log Contacts 324 Level 3
Level 1 Level 2 Level 3 Comments All calls Incoming calls Outgoing calls Telephone Contacts After making choices, start the call. Call log View Magnifying glass Create Call Addresses New Import Delete View Telephone Delete all After making choices, start the call.
08 Telephone Level 1 "Telephone" Level 2 Bluetooth (equipment) Secondary page Telephone connection Devices detected Telephone Options 326 Level 3
Level 1 Level 2 Level 3 Comments Search Start the search for another peripheral device to connect. Disconnect Stop the Bluetooth connection to the selected peripheral device. Secondary page Update Import the contacts from the selected telephone to store them in the audio system. Bluetooth Connection Delete Delete the selected telephone. Confirm Save the settings.
08 Bluetooth Pairing a Bluetooth telephone First connection For reasons of safety and because they require prolonged attention on the part of the driver, the operations for pairing the Bluetooth mobile telephone to the hands-free system of the audio system must be carried out with the vehicle stationary. Procedure (short) from the telephone Select Search. The list of telephones detected is displayed. In the Bluetooth menu of your device, select the system name in the list of devices detected.
08 Bluetooth The services available depend on the network, the SIM card and the compatibility of the Bluetooth telephone used. Check the telephone manual and with your network provider for details of the services available to you. The ability of the system to connect with only one profile depends on the telephone. The two profiles may both connect by default. Visit www.peugeot.co.uk for more information (compatibility, additional help, ...). The telephone is added to the list.
08 Bluetooth Managing paired telephones This function allows the connection or disconnection of a peripheral device as well as the deletion of a pairing. Press on Telephone to display the primary page then go to the secondary page. Receiving a call An incoming call is announced by a ring and a superimposed display in the screen. Make a short press on the steering mounted TEL button to accept an incoming call. Select "Bluetooth" to display the list of paired peripheral devices.
08 Contacts Making a call Use of the telephone is not recommended while driving. We recommended that you park safely or make use of the steering mounted controls. Calling a new number Calling a contact Press on Telephone to display the primary page. Press on Telephone to display the primary page. Enter the phone number using the keypad then "Call" to start the call. Or make a long press on the steering mounted TEL button. Select "Contacts". Select the desired contact from the list offered.
08 Call log Ending a call Calling a recently used number Press on Telephone to display the primary page. Select "Call log". Select the desired contact from the list offered. It is always possible to make a call directly from the telephone; park the vehicle first as a safety measure. 332 Select "End call". or Make a long press on the steering mounted TEL button.
08 Settings Ringtones Press on Telephone to display the primary page then go to the secondary page. Managing contacts / Entries Press on Telephone to display the primary page. Select "Contacts". Select "Telephone Options". Select "Add contact". Select "Ringtones". You can select the ringtone used and adjust its volume. Select "Confirm". Select: "New" to add a new contact. "Modify" to edit the selected contact. "Delete" to delete the selected contact.
Frequently asked questions The following table groups together the answers to the most frequently asked questions concerning your audio system. QUESTION ANSWER SOLUTION Navigation, guidance The route calculation is not successful. The guidance criteria may conflict with the current location (exclusion of toll roads on a toll motorway). I am unable to enter my post code. The system only accepts post codes of up to 5 characters. The POIs do not appear. The POIs have not been selected.
Frequently asked questions QUESTION Certain traffic jams along the route are not indicated in real time. The altitude is not displayed. ANSWER SOLUTION On starting, it is several minutes before the system begins to receive the traffic information. Wait until the traffic information is being received correctly (display of the traffic information icons on the map). The filters are too restrictive. Modify the "Geographic filter" settings. In certain countries, only major routes (motorways...
Frequently asked questions QUESTION ANSWER SOLUTION Some contacts are duplicated in the list. The options for synchronizing contacts are synchronizing the contacts on the SIM card, the contacts on the telephone, or both. When both synchronizations are selected, some contacts may be duplicated. Select "Display SIM card contacts" or "Display telephone contacts". Contacts are not shown in alphabetical order. Some telephones offer display options.
Frequently asked questions QUESTION ANSWER SOLUTION Some characters in the media information are not displayed correctly while playing. The audio system does not display some types of characters. Use standard characters to name tracks and folders. Playing of streaming files does not start. The peripheral device connected does not support automatic play. Start the playback from the device. The names of tracks and the track length are not displayed on the screen when streaming audio.
Frequently asked questions QUESTION ANSWER SOLUTION Settings, configuration In changing the setting of treble and bass the equalizer setting is deselected. The selection of an equalizer setting imposes the balance settings. Modifying one without the other is not possible. Modify the balance or equalizer settings to obtain the desired musical ambience. The selection of a distribution setting imposes the balance settings. Modifying one without the other is not possible.
Frequently asked questions QUESTION ANSWER With the engine off, the system switches off after a few minutes of use. When the engine is switched off, the system's operating time depends on the battery charge. The switch-off is normal: the system switches to economy mode and switches off to prevent discharging of the vehicle's battery. SOLUTION Start the vehicle's engine to increase the battery charge.
340
Audio system CONTENTS The system is coded in such a way that it will only operate in your vehicle. For safety reasons, the driver must only carry out operations which require prolonged attention while the vehicle is stationary. When the engine is switched off and to prevent discharging of the battery, the audio system may switch off after a few minutes. 01 First steps p. 342 02 Steering mounted controls p. 343 03 Main menu p. 344 04 Audio p. 345 05 Audio settings p.
01 First steps Select screen display between modes: Full screen: Audio In a window: Audio - Time or Trip computer. Long press: black screen (DARK). Select source: Radio, CD, AUX, USB. TA (Traffic Announcement) function On / Off. Long press: access to type of information. Display the list of stations received, CD/MP3 tracks or folders. Long press: manage the classification of MP3/WMA files / update the list of stations received. Access to main menu. Abandon the current operation. Up one level.
02 Steering mounted controls - - - Press: access to the instrument panel screen menu. Rotation: navigation in the instrument panel screen menu. - Rotation: Radio: search for previous / next station. Media: previous / next track. Press: confirmation. Increase volume. - Change the audio source. - Select the type of permanent display on the screen between window and full screen modes. Long press: black screen (DARK). Mute / restore sound. - - Decrease volume.
03 Main menu "Multimedia": Media parameters, Radio parameters. > Screen C For a detailed global view of the menus available, refer to the "Screen menu map" section.
04 Audio Radio Selecting a station The exterior environment (hills, buildings, tunnel, car park, below ground...) may prevent reception, even in RDS station tracking mode. This phenomenon is normal in the propagation of radio waves and is in no way indicative of a fault with the audio system. Press LIST to display the list of stations received in alphabetical order. Select the desired radio station and confirm by pressing OK. Press SOURCE or SRC several times in succession and select radio.
04 Audio RDS Receiving TA messages RDS, if displayed, enables you to continue listening to the same station by automatic retuning to alternative frequencies. However, in certain conditions, coverage of an RDS station may not be assured throughout the country as radio stations do not cover 100 % of the territory. This explains the loss of reception of the station during a journey. The TA (Traffic Announcement) function gives priority to TA alert messages.
04 Audio Receiving INFO messages Display RADIO TEXT The INFO function gives priority to TA alert messages. To be active, this function needs good reception of a radio station that transmits this type of message. When a message is transmitted, the current audio source (Radio, CD, USB, ...) is interrupted automatically to receive the INFO message. Normal play resumes at the end of the message transmission. Radio text is information transmitted by the radio station related to the current programme or song.
04 Audio Audio CD Playing a CD Insert 12 cm diameter circular compact discs only. Some anti-pirating systems, on original discs or CDs copied using a personal recorder, may cause faults which are no reflection on the quality of the original player. Without pressing the EJECT button, insert a CD in the player, play begins automatically. Press LIST to display the list of tracks on the CD. Press and hold one of the buttons for fast forward or backward.
04 Audio CD, USB Information and advice The audio system will only play files with extension ".mp3" or ".wma" and a compression rate that is constant or variable between 32 Kbps and 320 Kbps. It is advisable to restrict file names to 20 characters without using special characters (e.g. " ? ; ù) to avoid any playing or displaying problems. The playlists accepted are types .m3u and .pls. The number of files is limited to 5 000 in 500 directories on a maximum of 8 levels.
04 Audio CD, USB Playing a compilation Press one of the buttons to select the next or previous track. Insert an MP3 compilation in the CD player or connect a memory stick to the USB port, directly or via an extension lead. The system creates playlists (temporary memory) the creation time for which can take from a few seconds to several minutes. The playlists are updated every time the ignition is switched off or a USB memory stick is connected.
04 Audio USB memory stick - File sorting Select a line in the list. Make a long press on LIST or press MENU, select "Multimedia", then "Media parameters" and finally "Choice of track listing" to display the different types of sorting. Select a track or a folder. Up a level in the menu. Skip a track. Having selected the desired sorting ("By folders", "By artists", "By genres", "By playlists") press OK. Then confirm OK to save the modifications.
04 Audio APPLE® players or portable player The audio files on a Mass Storage portable player* can be heard through the vehicle's speakers by connecting it to the USB port (cable not supplied). Management of the device is via the audio system controls. The playlists are those defined in the Apple® player. If the portable player is not recognised by the USB port, connect it to the auxiliary Jack socket. The Apple® player must be generation 5 or later. * Check your player's manual.
04 Audio Auxiliary socket (AUX) Auxiliary Jack socket The auxiliary Jack socket permits the connection of a portable non-mass storage device or an Apple® player if not recognised by the USB port. Do not connect a device to the USB port and to the auxiliary Jack socket at the same time. Connect the portable device to the auxiliary Jack socket using a suitable cable (not supplied). Press the SOURCE or SRC button several times in succession and select "AUX".
04 Audio Play mode The play modes available are: Normal: the tracks are played in order, depending on the classification of the selected files. Random: the tracks in an album or folder are played in a random order. Random all: all of the tracks saved in the media are played in random order. Repeat: the tracks played are only those from the current album or folder. Press OK for access to the contextual menu. or Press MENU. Select "Multimedia" and confirm. Select "Media parameters" and confirm.
05 Audio settings Screen C The distribution (or spatialisation using the Arkamys© system), is an audio process which allows the sound quality to be improved according to the setting chosen, corresponding to the position of the listeners in the vehicle. The Ambience, Treble and Bass audio settings are different and independent for each sound source. Press ¯ to display the audio settings menu.
06 Screen menu map(s) Screen C MAIN FUNCTION Option A 1 Option A1 2 3 1 MULTIMEDIA Option A11 Media parameters 1 2 Option B...
Frequently asked questions The following tables contain answers to the most frequently asked questions. QUESTION ANSWER SOLUTION There is a difference in sound quality between the different audio sources (radio, CD...). For optimum sound quality, the audio settings (Volume, Bass, Treble, Ambience, Loudness) can be adapted to the different sound sources, which may result in audible differences when changing source (radio, CD...).
Frequently asked questions QUESTION The quality of reception of the radio station listened to gradually deteriorates or the stored stations do not function (no sound, 87.5 MHz is displayed...). ANSWER SOLUTION The vehicle is too far from the transmitter used by the station listened to or there is no transmitter in the geographical area through which the vehicle is travelling. Activate the RDS function to enable the system to check whether there is a more powerful transmitter in the geographical area.
Frequently asked questions QUESTION ANSWER SOLUTION The CD is ejected automatically or is not played by the player. The CD is inserted upside down, is unplayable, does not contain any audio data or contains an audio format which the player cannot play. The CD is protected by an anti-pirating protection system which is not recognised by the audio equipment. - The CD player sound is poor. The CD used is scratched or of poor quality. Insert good quality CDs and store them in suitable conditions.
Frequently asked questions QUESTION ANSWER SOLUTION The hard disk or device is not recognised when connecting to the USB port. Some hard disks and devices need a power supply greater than is provided by the audio system. In "Random all" play, not all of the tracks are played. In "Random all" play, the system can only take into account up to 999 tracks. With the engine off, the audio system switches off after a few minutes of use.
Visual search Exterior Saloon Remote control key / electronic key - opening / closing - anti-theft protection - starting - battery Wipers Changing a wiper blade 41-51 Sunroof Roof bars Accessories 60-61 225 227-228 44, 56, 59 Boot - opening / closing - emergency release Temporary puncture repair kit 186-191 Changing bulbs - rear lamps - 3rd brake lamp - number plate lamps 203, 206 Parking sensors Towbar Towing 134-136 223-224 221-222 Welcome lighting 145 Door mirror spotlamps 145 Additional headla
Visual search Exterior SW Remote control key / electronic key - opening / closing - anti-theft protection - starting - battery Wipers Changing a wiper blade 41-51 Sunroof Panoramic sunroof Roof bars Accessories 60-61 62 225 227-228 44, 56, 59 Boot - opening / closing - emergency control 57-58 Motorised tailgate Temporary puncture repair kit 186-191 362 149-152 152, 220 145 Welcome lighting 145 Door mirror spotlamps 147 Additional headlamps 148 Additional secondary headlamps 146 Headlamp adjustment 2
Visual search Interior Boot fittings (Saloon) - rings, hooks, straps - storage box - boxes, storage - boot lamp - floor Boot fittings (SW) - rings hooks - boot lamp - floor - 12 V accessory socket - storage Luggage cover (SW) High load net (SW) Warning triangle AdBlue ® additive tank Rear seats ISOFIX child seats 79 80 Front seats - manual - electric - welcome function - head restraints - heated - massage 66-70 Mats Airbags 81 82-83 173 242-249 76 Interior fittings Deactivating the passenger's fron
Visual search Instruments and controls Electric parking brake 103-108 Dashboard fuses 207-208 Opening the bonnet Door mirrors Electric windows, deactivating 5/6-speed manual gearbox Gear shift indicator Automatic gearbox Electronic gearbox Stop & Start Hill start assist Manual parking brake Peugeot Connect USB Courtesy lamps 153 Seat belt / passenger's front airbag warning lamps display 180, 183 Rear view mirror 75 Sunroof 60-61 62 SW panoramic sunroof 269-340 40 Audio system Setting the date/ti
Visual search Instruments and controls (cont.
Visual search Maintenance - Technical data Checking levels 237-239 - oil - brake fluid - power steering fluid - coolant - screenwash/headlamp wash fluid - fuel additive (Diesel) 242-249 AdBlue ® additive Checking components 240-241 - 12 V battery - air filter - passenger compartment filter - oil filter - particle filter (Diesel) - gearbox - brake pads / discs - parking brake - electric parking brake Changing bulbs - front - rear Running out of fuel (Diesel) Petrol weights Diesel weights 252-253 258-261
Alphabetical index A Accessories...................................................227 Accessory socket, 12 volt................................76 Adaptive lighting.............................................144 AdBlue ®.............................................. 22, 27, 242 Adjusting headlamps.....................................146 Adjusting head restraints...........................66, 69 Adjusting seat belt height..............................180 Adjusting the steering wheel........................
Alphabetical index E Eco-driving ......................................................10 Economy mode..............................................219 Electronic engine immobiliser................. 51, 102 Electronic stability control (ESC)................... 176 Emergency boot release..................................59 Emergency call..............................172, 265, 266 Emergency starting........................................ 212 Emergency starting and switching off..............................
Alphabetical index K Keeping children safe.............155-170, 181, 183 Key..............................................................41-51 Key, electronic...................................... 41-46, 49 Keyless Entry and Starting..................................... 42-47, 101, 102 Key with remote control.................................102 L Labels, identification......................................264 Lamps, warning and indicator................... 14-25 LEDs - light-emitting diodes..............
Alphabetical index Replacing fuses......................................207-210 Replacing the air filter....................................240 Replacing the oil filter....................................240 Replacing the passenger compartment filter.......................................240 Replacing wiper blades.........................152, 220 Resetting the service indicator........................29 Reversing camera.......................................... 137 Reversing lamp...........................
Alphabetical index V Vehicle configuration.......................................13 Vehicle identification......................................264 Ventilation.................................................. 84-87 W Warning lamps........................................... 14-25 Warning lamp, SCR emissions control system.....................23 Warning triangle............................................. 173 Wash-wipe, rear.............................................150 Weights..........................
For any work on your vehicle, use a qualified workshop that has the technical information, competence and equipment required, which a PEUGEOT dealer is able to provide. Reproduction or translation of all or part of this document is prohibited without written authorisation from Automobiles PEUGEOT.
Anglais www.peugeot.com AN. 14508.
