Technical data

Obsolete and Discontinued Commands 33

Keysight InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide 725

:MEASure:LOWer

(see page 792)

Command Syntax

:MEASure:LOWer <voltage>

The :MEASure:LOWer command sets the lower measurement threshold value. This

value and the UPPer value represent absolute values when the thresholds are

ABSolute and percentage when the thresholds are PERCent as defined by the

:MEASure:DEFine THResholds command.

Query Syntax

:MEASure:LOWer?

The :MEASure:LOWer? query returns the current lower threshold level.

Return Format

<voltage> ::= the user-defined lower threshold in volts in NR3 format

See Also • "Introduction to :MEASure Commands" on page 340

• ":MEASure:THResholds" on page 728

• ":MEASure:UPPer" on page 732

NOTE

The :MEASure:LOWer command is obsolete and is provided for backward compatibility to

previous oscilloscopes. Use the :MEASure:DEFine THResholds command (see page 344)

instead.