Technical data

714 Keysight InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
33 Obsolete and Discontinued Commands
:DISPlay:CONNect
(see page 792)
Command Syntax
:DISPlay:CONNect <connect>
<connect> ::= {{ 1 | ON} | {0 | OFF}}
The :DISPlay:CONNect command turns vectors on and off. When vectors are
turned on, the oscilloscope displays lines connecting sampled data points. When
vectors are turned off, only the sampled data is displayed.
Query Syntax
:DISPlay:CONNect?
The :DISPlay:CONNect? query returns the current state of the vectors setting.
Return Format
<connect><NL>
<connect> ::= {1 | 0}
See Also • ":DISPlay:VECTors" on page 262
NOTE
The :DISPlay:CONNEct command is an obsolete command provided for compatibility to
previous oscilloscopes. Use the :DISPlay:VECTors command (see page 262) instead.