Technical data

:SBUS<n> Commands 25

Keysight InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide 495

:SBUS<n>:SPI:BITorder

(see page 792)

Command Syntax

:SBUS<n>:SPI:BITorder <order>

<order> ::= {LSBFirst | MSBFirst}

The :SBUS<n>:SPI:BITorder command selects the bit order, most significant bit

first (MSB) or least significant bit first (LSB), used when displaying data in the

serial decode waveform and in the Lister.

Query Syntax

:SBUS<n>:SPI:BITorder?

The :SBUS<n>:SPI:BITorder? query returns the current SPI decode bit order.

Return Format

<order> ::= {LSBF | MSBF}

Errors • "-241, Hardware missing" on page 753

See Also • "Introduction to :SBUS<n> Commands" on page 447

• ":SBUS<n>:MODE" on page 451

• ":SBUS<n>:SPI Commands" on page 493