Technical data

352 Keysight InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide

20 :MEASure Commands

:MEASure:NWIDth

(see page 792)

Command Syntax

:MEASure:NWIDth [<source>]

<source> ::= {<digital channels> | CHANnel<n> | FUNCtion | MATH

| WMEMory<r>}

<digital channels> ::= DIGital<d> for the MSO models

<n> ::= 1 to (# of analog channels) in NR1 format

<r> ::= 1-2 in NR1 format

<d> ::= 0 to (# digital channels - 1) in NR1 format

The :MEASure:NWIDth command installs a screen measurement and starts a

negative pulse width measurement. If the optional source parameter is not

specified, the current source is modified.

Query Syntax

:MEASure:NWIDth? [<source>]

The :MEASure:NWIDth? query measures and outputs the width of the negative

pulse on the screen closest to the trigger reference using the midpoint between

the upper and lower thresholds.

FOR the negative pulse closest to the trigger point:

width = (time at trailing rising edge - time at leading falling edge)

Return Format

<value> ::= negative pulse width in seconds in NR3 format

See Also • "Introduction to :MEASure Commands" on page 340

• ":MEASure:SOURce" on page 361

• ":MEASure:PWIDth" on page 358

• ":MEASure:PERiod" on page 355

NOTE

This command is not available if the source is FFT (Fast Fourier Transform).