Technical data

280 Keysight InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
16 :FUNCtion Commands
:FUNCtion:DISPlay
(see page 792)
Command Syntax
:FUNCtion:DISPlay <display>
<display> ::= {{1 | ON} | {0 | OFF}}
The :FUNCtion:DISPlay command turns the display of the function on or off. When
ON is selected, the function performs as specified using the other FUNCtion
commands. When OFF is selected, function is neither calculated nor displayed.
Query Syntax
:FUNCtion:DISPlay?
The :FUNCtion:DISPlay? query returns whether the function display is on or off.
Return Format
<display><NL>
<display> ::= {1 | 0}
See Also • "Introduction to :FUNCtion Commands" on page 278
• ":VIEW" on page 182
• ":BLANk" on page 158
• ":STATus" on page 179