Technical data

222 Keysight InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide

10 :CHANnel<n> Commands

:CHANnel<n>:DISPlay

(see page 792)

Command Syntax

:CHANnel<n>:DISPlay <display value>

<display value> ::= {{1 | ON} | {0 | OFF}}

<n> ::= 1 to (# analog channels) in NR1 format

The :CHANnel<n>:DISPlay command turns the display of the specified channel on

or off.

Query Syntax

:CHANnel<n>:DISPlay?

The :CHANnel<n>:DISPlay? query returns the current display setting for the

specified channel.

Return Format

<display value> ::= {1 | 0}

See Also • "Introduction to :CHANnel<n> Commands" on page 218

• ":VIEW" on page 182

• ":BLANk" on page 158

• ":STATus" on page 179

• ":POD<n>:DISPlay" on page 413

• ":DIGital<d>:DISPlay" on page 245