Technical data

190 Keysight InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide

7 :ACQuire Commands

:ACQuire:SEGMented:COUNt

(see page 792)

Command Syntax

:ACQuire:SEGMented:COUNt <count>

<count> ::= an integer from 2 to 25 (w/100K memory) in NR1 format

The :ACQuire:SEGMented:COUNt command sets the number of memory segments

to acquire.

The segmented memory acquisition mode is enabled with the :ACQuire:MODE

command, and data is acquired using the :DIGitize, :SINGle, or :RUN commands.

The number of memory segments in the current acquisition is returned by the

:WAVeform:SEGMented:COUNt? query.

The maximum number of segments may be limited by the memory depth of your

oscilloscope. For example, an oscilloscope with 100K memory allows a maximum

of 25 segments.

Query Syntax

:ACQuire:SEGMented:COUNt?

The :ACQuire:SEGMented:COUNt? query returns the current count setting.

Return Format

<count> ::= an integer from 2 to 25 (w/100K memory) in NR1 format

See Also • ":ACQuire:MODE" on page 187

• ":DIGitize" on page 159

• ":SINGle" on page 178

• ":RUN" on page 176

• ":WAVeform:SEGMented:COUNt" on page 647

• ":ACQuire:SEGMented:ANALyze" on page 189

• "Introduction to :ACQuire Commands" on page 183

Example Code • "Example Code" on page 191

NOTE

This command is available when the segmented memory option (Option SGM) is enabled.