Specifications

Rev 1.1 VisualSonics Vevo 2100 Imaging System Operator Manual 89
Chapter 13: Setting the Annotation tab preferences
Preference Description
Show Annotations
When you select the check box... You can press
Update
and select or
create an annotation.
When you clear the check box... The system:
 Hides any annotations that have already been made
 Cannot make any annotations
IMPORTANT: You must select this check box to add
annotations to your image data.
Line Style
Select the line style that you want the system to use for the line that you
can extend from the annotation.
4. In the Measurement Package section click Save.
Annotations preferences
Use the Annotations preferences section to customize the list of available
annotations you can use when you are annotating an image for a specific
measurement package.
You can customize the list of annotations for custom measurement packages. You
cannot customize the list of annotations for the default measurement packages
that are included with the system.
f To customize the list of available annotations for a custom
measurement package:
1. From the Study Browser (page 49) click Prefs and then click the Annotation
tab.
2. In the Measurement Package section, in the drop-down list select the custom
measurement package you want to customize.
3. In the Annotations section:
a. Select a top level list item or expand the top level item and select a second
level item.
b. On the right side of the Annotations list, click the commands described in
the following table to manage the revisions to your list.
Command Description
Add Image Group
Adds an item at the bottom of the top-level list. Type the custom name for
the image group and press
ENTER
.
Add Physiological
Group
Adds an item at the bottom of the top-level list. Type the custom name for
the image group and press
ENTER
.