Specifications

86 VisualSonics Vevo 2100 Imaging System Operator Manual Rev 1.1
Chapter 12: Setting the Measurement tab preferences
Preference Description
Show Values and
Labels on Image
When you select the check box... When you apply a protocol measurement
in the image area, the system displays the name of the protocol measurement
and all the the parameter values that you specified in the
Measurement
Parameters
preferences section.
When you clear the check box... The system:
 Displays only the measurement index number in the image area
 Displays measurement labels and values in the Measured Values list
Show Embryo
Index
Displays the index of the embryo specified by
horn: number field
Show Protocol
Name
When you apply a protocol measurement in the image area, the system adds
the name of the protocol to the name of the measurement.
Numeric Precision
Sets the number of digits to display after the decimal for non-integer
measurement values.
Auto Point Spacing
Sets how densely you want the system to add caliper points when you add a
measurement using the Traced Distance ROI or the Polygon ROI trace tool.
Drag the slider to set the caliper density.
Auto Point Spacing: Fine Auto Point Spacing: Coarse
Caliper Size
Line Thickness
These two drop-down lists control the appearance of the lines that appear when
you add a measurement.
Line thickness: Heavy
Caliper size: Small
Line thickness: Thin
Caliper size: Small
Line thickness: Thin
Caliper size: Large
Font
Font Size
These two drop-down lists control the style of text that appears on your image
when you add a measurement or an annotation.
4. In the Measurement Package section click Save.
The system applies your new settings to the next measurements you add. The
settings do not alter the appearance of any existing measurements.