Specifications

Rev 1.1 VisualSonics Vevo 2100 Imaging System Operator Manual 85
Chapter 12: Setting the Measurement tab preferences
 In the Mode window, on the Measured Values section in the measurements
panel the system lists only the selected measurement parameters
Related information
 Modifying the properties of a measurement (page 170)
Measurement Display preferences
Use the Measurement Display preference section to customize how you want
your measurements to appear on the images you create for a specific
measurement package.
You can customize the measurement display style for custom measurement
packages. You cannot customize the measurement display style for the default
measurement packages that are included with the system.
f To customize the measurement display settings:
1. Press
Prefs
and then click the Measurement tab.
2. In the Measurement Package section, in the drop-down list select the custom
measurement package you want to customize.
3. In the Measurement Display section configure the measurement display style
options as described in the following table.
Preference Description
Show
Measurements
When you select the check box.. The system makes the list of measurement
protocols available so you can add measurements to your image.
When you clear the check box... The system:
 Hides any measurements that have already been made in the image but
not in the list of measured values.
 Dims the list of measurements so you can see the list items but you
cannot work with them.
IMPORTANT: You must select this check box to add
measurements to your image data.