Specifications

84 VisualSonics Vevo 2100 Imaging System Operator Manual Rev 1.1
Chapter 12: Setting the Measurement tab preferences
Measurement Parameters preferences
Use the Measurement Parameters section to select the measurement parameters
that you want the system to display when you add a measurement to an image
for a specific measurement package.
You can customize the measurements and measurement parameters for custom
measurement packages. You cannot customize the measurements and
measurement parameters for the default measurement packages that are included
with the system.
f To select the measurement parameters to display:
1. From the Study Browser (page 49) click Prefs and then click the
Measurement tab.
2. Expand the appropriate measurement and then select the parameter check
boxes that you want the system to display.
In this example, for the Angle measurement,
the operator selects the following parameters:

Blood Pressure

Degrees
3. Set the parameters for any other measurements you want to customize.
4. Click OK.
The system saves your measurement parameters preferences.
When you add a measurement
 In the Mode window, on the ultrasound image the system displays only the
measurement parameters you selected in the Measurement Parameters
section