Specifications

Rev 1.1 VisualSonics Vevo 2100 Imaging System Operator Manual 83
Chapter 12: Setting the Measurement tab preferences
Activating measurement packages
f To activate a measurement package when you create a new study or
series:
1. Press
New
and then click New Study or New Series.
2. Complete the required fields including the Measurement Package field and
then click OK.
f To activate a measurement package from a mode window:
1. Open an existing image from the Study Browser or start imaging.
2. Press
Measure
to view the measurement tools.
3. In the Measurement Package drop-down list select the package you want to
activate.
f To activate a measurement package from the Preferences window:
1. Press
Prefs
and then click the Measurement tab.
2. In the Measurement Package drop-down list, select the package you want to
activate.
3. Ensure that the Enable Package check box is selected.
4. Click Activate and then click OK.
When you analyze an image, the measurement package you selected is active
when you begin to add measurements.
Showing/hiding measurement packages in a mode window
f To show or hide a measurement package when you are working in a
mode window:
1. From the Study Browser (page 49) click Prefs and then click the
Measurement tab.
2. Beside the Measurement Package section:
 Select the Enable Package check box so that the measurement package will
appear in the list of available packages when you are selecting
measurements in the left panel
 Clear the check box to hide the measurement package