Specifications

Rev 1.1 VisualSonics Vevo 2100 Imaging System Operator Manual 73
Chapter 10: Setting the General tab preferences
2. In the Auto SAVE On Scan Completion section, select the check boxes for the
applicable imaging modes.
3. Click OK.
Mode Screen Layout preferences
Use the Mode Screen Layout preference to change the relative size of the B-Mode
scout window to the mode data window when you are in the following dual
window modes: M-Mode, PW Doppler Mode and Tissue Doppler Mode.
f To set the Mode Screen Layout preferences:
1. From the Study Browser (page 49) click Prefs and then click the General tab.
2. In the Mode Screen Layout section, click the appropriate layout graphic.
3. Click OK.
Image Export preferences
Use the Image Export preference to include or not include the date and time
stamp in the header area of any image you export.
f To include the date and time stamp in the header area of your image
export:
1. From the Study Browser (page 49) click Prefs and then click the General tab.
2. In the Image Export section click the Show Date/Time on Image Header
check box.
3. Click OK.
PW Doppler Scale preferences
Use the PW Doppler Scale preference section to select the scale type for the
spectral display (either velocity or frequency) when you acquire or analyse PW
Doppler image data.
f To set the PW Doppler scale:
1. From the Study Browser (page 49) click Prefs and then click the General tab.
2. In the PW Doppler Scale section, select the scale you want to work with: