Specifications

66 VisualSonics Vevo 2100 Imaging System Operator Manual Rev 1.1
Chapter 9: Working with operator profiles
CAUTION: If you do not create at least one Administrator operator as part of your
operator group, any operator can add or delete other operators' studies.
Important conditions
 You can modify your own password
 Only an administrator can modify the password of another operator
f To add a password to an operator:
1. Press
Prefs
and then click the Operator tab.
2. Select the name of the operator and then click Modify.
3. In the Operator Properties window:
a. Select the Password Protected check box.
The Password boxes become active.
b. In the Password box type the password, then tab to the Retype Password
box and retype it.
c. Click OK.
The system stores the password and returns you to the Operator list.
f To change an operator password:
1. Select the name of the operator and then click Modify.
2. In the Operator Properties window:
a. In the Password box select and delete the existing password, then type the
new password.
b. Tab to the Retype Password box and type the new password over the old
one.
c. Click OK.
The system stores the new password and returns you to the Operator list.
f To remove password access for an operator:
1. Select the name of the operator and then click Modify.
2. In the Operator Properties window:
a. Clear the Password Protected check box.
b. Click OK.