Specifications

64 VisualSonics Vevo 2100 Imaging System Operator Manual Rev 1.1
Chapter 9: Working with operator profiles
a. In the Name box, type a name for the operator. Typically this is the user's
personal name.
Notes: You cannot type the same name for two operators. Also, you cannot
modify the name after you have added the operator, so make sure you type the
correct name.
b. In the Type choice, select Standard.
c. If you want to give this operator password protection to prevent non-
administrators from deleting their studies, select the Password Protected
check box.
The Password boxes become active.
d. In the Password box, type the password, then tab to the Retype Password
box and retype it.
e. Press OK.
4. Enter your password and click OK.
The system creates the new operator profile and lists it in the Operator list.
5. Click OK.
CAUTION: If you do not create at least one Administrator operator as part of your
operator group, any operator can add or delete other operators' studies.
Next step
 Adding an administrator (page 62)
Related information
 How passwords and study locks work (page 130)
Modifying an operator
An operator profile is the information that describes:
 The identity of an operator
 The operator's user type (standard or administrator)
 The operator's password, if they have one
Important conditions
 Only an administrator can modify the profile of another operator