Specifications

Rev 1.1 VisualSonics Vevo 2100 Imaging System Operator Manual 63
Chapter 9: Working with operator profiles
2. Click the Operator tab and then click Add.
3. In the Operator Properties dialog box:
a. In the Name box, type a name for the operator. Typically this is the user's
personal name.
Notes: You cannot type the same name for two operators. Also, you cannot
modify the name after you have added the operator, so make sure you type the
correct name.
b. In the Type choice, select Administrator.
c. Select the Password Protected check box.
The Password boxes become active.
d. In the Password box, type the password, then tab to the Retype Password
box and retype it.
4. Press OK.
The system creates the new administrator profile and lists it in the Operator
list.
5. Click OK.
Related information
 Adding a standard operator (page 63)
 How passwords and study locks work (page 130)
Adding a standard operator
Only an administrator can add an operator or another administrator.
A standard operator can:
 Acquire and review image data
 Lock or unlock their own studies, and lock or unlock studies owned by other
operators that are not password protected
 Change their own operator password, if they have one
f To create an operator:
1. Press
Prefs
. The Preferences window appears.
2. Click the Operator tab and then click Add.
3. In the Operator Properties dialog box: