Specifications

Rev 1.1 VisualSonics Vevo 2100 Imaging System Operator Manual 47
Chapter 6: Vevo 2100 Imaging System workspaces
Area Description
Image details
 Displays the system default study name and series name (unless you have customized them
in the
Study Information section of the Study Information window).
 Displays the Animal ID if you added it in the Series Information section of the Study
Information
window.
 Displays the image label if you added it by pressing
Image Label
.
Image status
The top (yellow) line identifies the ultrasound mode that the image was acquired in (for example
B-Mode). The lower (white) line identifies the state of the image:
 Acquired. Confirms that the system has acquired the image after you press
Scan/Freeze
.
Note that this does not mean that the image is saved. You must press
Cine Store
or
Frame Store
to store the image.
 Stored. Confirms that the system stored the image after you press
Cine Store
or
Frame Store
.
 Recalled. The image was opened from the Study Browser.
 Nothing appears below the yellow mode label while you are in the process of acquiring data.
Time stamp/system status. The top two (white) lines display the actual time when the system
acquired the visible frame. The lower (yellow) line identifies the current state of the system:
 System Active. The system is acquiring image data.
 System Paused. The system is displaying the acquired image after you press
Scan/Freeze
.
 Review. The system is displaying a stored image.
Related information
 Control panel (page 57)
 Setting up your Vevo 2100 Imaging System (page 101)
 Working with physiological data (page 109)
 Typical acquisition session workflow (page 120)
Left panel workspace
You can set the left panel to display one of the following workspaces:
 Mode settings
 Measurements tools
 Physiological data options (not applicable in 3D-Mode)