Specifications

Rev 1.1 VisualSonics Vevo 2100 Imaging System Operator Manual 45
Chapter 6: Vevo 2100 Imaging System workspaces
The following illustration and table describes the information and features in the
Mode window.
A typical Mode window workspace. This example is a B-Mode window displaying a stored cine loop.
Area Description
Image data panel. Displays the image data that the transducer produces, and displays the
physiological data if you are acquiring it. When you export a stored image and configure your
export to send only the
Image Area, this is the image area that the system exports.
Micro-ultrasound image. Displays the data that the transducer acquires. When you review an
image, this is the workspace where you use the image measurement tools to apply your
measurements.
Depth ruler. Indicates the depth from the transducer face. The triangular arrow indicates the focal
length(s) of the transducer. When you acquire image data, use the
Depth control on the control
panel to increase or decrease the depth that you can see.
Focal depth indicator. When you acquire data in B-Mode, use the Focal Zones control on the
control panel to add up to three focal zones.
Transducer orientation indicator. The line in this icon corresponds to the orientation ridge on the
transducer and indicates the orientation of the probe relative to the image. If your transducer is
acquiring at 180 degrees the wrong way, you can click the indicator to flip the image.