Specifications

Rev 1.1 VisualSonics Vevo 2100 Imaging System Operator Manual 433
Appendix F: Safety
CAUTION: Watch out for strained and twisted cables.
Some of the optional accessories have long cables. Take care when
working around the cables.
CAUTION: VisualSonics recommends that the Vevo 2100 Imaging
System be pushed by one person from behind and guided by another
person in front, using the grab bars. Please use caution when going up
or down ramps. Keep the system upright during transport.
Ensure that the castors are locked when the Vevo 2100 Imaging System
is not being transported.
Never lift the system using the grab bars.
Magnetic field sensitivity
CAUTION: DO NOT station the Vevo 2100 Imaging System close to
large clinical magnets as the magnetic fields may affect the performance
of the Vevo system and cause distortion in the acquired image.
Labeling and verification
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
 This device may not cause harmful interference; and
 This device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the operator will be required to correct
the interference at his own expense.